AutoDome VG4-MCAM-22 - Surveillance Camera BOSCH - Free user manual and instructions
Find the device manual for free AutoDome VG4-MCAM-22 BOSCH in PDF.
| Product Type | PTZ Dome Security Camera |
| Model | AutoDome VG4-MCAM-22 |
| Brand | Bosch |
| Category | Security Camera |
| Dimensions (D x H) | 180 mm x 150 mm (7.1 in x 5.9 in) |
| Weight | 2.5 kg (5.5 lb) |
| Power Supply | 24 VAC (50/60 Hz) or PoE+ (IEEE 802.3at) |
| Optical Zoom | 22x (focal length 4.0 mm – 88 mm) |
| Pan/Tilt Range | 360° pan, 0° to 90° tilt |
| Image Sensor | 1/4-inch CMOS |
| Resolution | Up to 1920x1080 (Full HD) |
| Day/Night Mode | Yes, with IR cut filter |
| Minimum Illumination | 0.05 lux (color), 0.01 lux (B/W) |
| Video Compression | H.265, H.264, MJPEG |
| Ingress Protection | IP66 |
| Auto-Tracking | Yes, with Intelligent Video Analytics |
| Alarm I/O | 2 inputs, 2 outputs |
| Audio | External microphone and speaker support |
| Cleaning Instructions | Clean dome with soft, lint-free cloth; do not use harsh chemicals |
| Safety Precautions | Ensure secure mounting; use certified power supply; avoid exposure to extreme temperatures |
| Spare Parts & Repairability | Contact Bosch authorized service center; genuine spare parts available |
Frequently Asked Questions - AutoDome VG4-MCAM-22 BOSCH
User questions about AutoDome VG4-MCAM-22 BOSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual AutoDome VG4-MCAM-22 - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AutoDome VG4-MCAM-22 by BOSCH.
USER MANUAL AutoDome VG4-MCAM-22 BOSCH
AutoDome Modules and Accessories

The Bosch AutoDome modular camera system is a revolutionary new concept in dome cameras. The entire AutoDome system is based on five interchangeable modules: the Central Processing Unit (CPU), camera, housing, communications, and power supply. Simply swap one of the AutoDome's interchangeable modules and quickly upgrade from analog to IP, color to day/night, or add motion detection, and AutoTrack. Never before have you had the ability to adapt a security system to your changing needs this quickly or inexpensively.
The Bosch AutoDome also features a selection of power supply and mounting accessories with clear or tinted bubbles.
Interchangeable modules
Five interchangeable modules allow you to update camera functionality quickly and cost-effectively. Using common components lets you install a basic camera system today and migrate to a more advanced version tomorrow – without having to replace the entire dome, thus protecting your initial investment.
By using the same housing components, all installations have a consistent look, and observers have no idea which type of camera (if any) is watching over them. This unique, modular design also gives you the flexibility to move cameras between different housings when special coverage is needed, or as site plan requirements change. For example, an 18x PTZ camera over a specific area could
▶ Interchangeable Central Processing Unit (CPU), Camera, Housing and Communications modules
- Analog and Hybrid (analog/IP) Communications module options
- 24 VAC, 120 VAC, and 230 VAC Power Supply Units with an optional Fiber Optic Module
▶ Roof, Pipe, and Pendant Arm Mounting Systems
▶ Analog and IP Fiber Optic Communication Units
- Rugged Polycarbonate and High-resolution Acrylic Bubble Options
easily be "hot-swapped" to a 26x day/night without removing the power. AutoDome's Ethernet communications module allows you to add IP functionality while maintaining connectivity to existing analog inputs and outputs.
Functions
CPU Modules
100 Series CPU Module
The 100 Series CPU module provides fixed camera functionality, "hotswap" camera module replacement, pluggable communications module upgrades, and built-in surge suppression.
200 Series CPU Module
The 200 Series CPU module delivers fast 360° per second pan/tilt/zoom speeds, "hotswap" camera module replacement, pluggable communications module upgrades, built-in surge suppression, advanced diagnostics, and multilingual displays.
This module supports 64 pre-positions and a single preset tour. The preset tour has the capacity for up to 64 pre-positions with a configurable dwell time between pre-positions.
300 Series CPU Module
The 300 Series CPU module includes all of the features of the 200 Series plus additional presets and tours, cable compensation to extend cabling distances, and third-party protocol support. The Advanced Series also supports privacy masking and advanced alarm handling via a built-in rules engine.
500i Series CPU Module
The 500i Series CPU module includes all of the features of the 300 Series plus AutoTrackII motion tracking and video motion detection.
Camera Modules
High-performance Fixed Camera
The high-performance fixed cameras have a 1/3-inch interline CCD with Bosch's unique 15-bit Dinion digital imaging technology to deliver a 32-fold sensitivity improvement and a full 540 horizontal lines of resolution. Available in color and day/night versions, these cameras incorporate a number of features not found in other fixed dome cameras.
High-performance 18x PTZ Color Camera
The high-performance 18x PTZ color cameras have a 1/4-inch color CCD. With 470/480 TVL (NTSC/PAL) horizontal resolution and sensitivity down to 0.5 lux, this camera offers exceptional performance at an affordable price. A rugged motor with fewer moving parts mean that this camera uses less power and is extremely reliable, making it ideal for high-usage applications.
High-performance 18x and 26x PTZ Day/Night Camera
The high-performance PTZ day/night cameras have 470/480 TVL (NTSC/PAL) horizontal resolution. These cameras are available with either an 18x or a 26x optical zoom lens, and all cameras offer a full 12x digital zoom. The AutoScaling (proportional zoom) and AutoPivot (automatically rotates and flips the camera) features ensure optimal control.
High-performance 36x PTZ Day/Night Camera
Bosch offers the industry-leading 36x optical zoom lens with a full 12x digital zoom. The 36x camera provides a full 540 TVL of horizontal resolution for outstanding clarity and image detail. The 36x camera also incorporates an advanced backlight compensation technology that dramatically improves the dynamic range by 128 times, resulting in clear image reproduction in extreme high-contrast environments.
Housing Modules
All housings feature recessed screws and latches for increased tamper resistance.
AutoDome pendant housings (indoor and outdoor) are rated to provide IP 66 protection. In addition, the pendant housings come equipped with a low-impact, high-resolution acrylic bubble for enhanced image clarity
AutoDome in-ceiling housings provide IP 54 protection and are rated IK 8 (IEC 62262). These housings feature an impact-resistant polycarbonate Rugged Bubble to protect your camera from vandalism. The Rugged Bubble can withstand impacts equivalent to a 4.5 kg (10 lb) weight dropped from a height of 3 m (10 ft).
Outdoor EnviroDome housings provide an operating temperature range down to -40°C ( -40°F ). The optional “XT” extreme temperature kit allows an AutoDome to operate in temperatures down to -60°C ( -76°F ), ensuring reliable operation in even the harshest environments.
The Pressurized Environmental Housing is rated to provide IP 67 protection for a VG4 Series AutoDome® Modular Camera System from the elements, both natural and manmade. It is the ideal surveillance solution for applications that require frequent wash-down, including traffic, transit, bridges, tunnels and coastal installations where salt, moisture, dust, insects and fumes threaten the long-term operation of the camera.
Communications Modules
Fixed Communications Module
The Fixed Communications Module (standard on the AutoDome 100 Series) supports a variety of standard video and data transmission methods, including Bilinx (over coax and UTP) remote control, configuration, and firmware updates can also be performed over these cables, offering you unparalleled control of your cameras.
Standard Analog Communications Module
The Standard Analog Communications Module (standard on the AutoDome 200 and 300 Series) supports a variety of data transmission methods, including Bilinx (over coax and UTP) and fiber. Remote control, configuration, and firmware updates can also be performed over these cables, offering you unparalleled control of your cameras. Cable compensation provides extended coaxial and UTP distance runs while preventing the image quality degradation caused by signal losses from long cable lengths.
Alternative Protocol Communications Module
The Alternative Protocol Module allows you to control a VG4 AutoDome from an American Dynamics Manchester or Sensormatic RS-422 PTZ control device.
TCP/IP Communications Module
The TCP/IP Communications Module is an integral part of Bosch's AutoDome Modular Camera System, adding network connectivity to any AutoDome 100, 200, 300 or 500i Series camera. The TCP/IP module provides complete network-based control of all dome functionality including pan/tilt/zoom operation, presets, tours, and alarms as well as web-based configuration of all dome settings.
AutoDome cameras equipped with the TCP/IP
Communications Module deliver true hybrid operation.
With both Ethernet and analog BNC connections, network-enabled AutoDome cameras provide direct network connection while simultaneously supporting existing analog equipment. The TCP/IP Communications Module uses the latest compression technology, bandwidth throttling, and tri-streaming capabilities to efficiently manage bandwidth and storage requirements while delivering outstanding image quality.
Power Supplies
Bosch offers a variety of power supply units that are available with 24 VAC, 120 VAC, or 230 VAC transformers, come with an optional analog, multimode Fiber Optic video transmitter/data receiver module, and are NEMA-rated.
Accessories
Fiber Optic Kits
The VG4-SFIBER-MM (multimode) is an analog, fiber optic conversion kit for use with VG4 Series AutoDomes using either the Fixed or the Standard Communications Modules. This module is a video transmitter/data receiver modules designed to be mounted directly into a VG4 AutoDome power supply box.
The VG4-SFPSCKT is a unique media converter module for use with VG4 series AutoDomes incorporating the Ethernet (TCP/IP) Communications Module. This media converter module is designed to accept any of the 10/100 Mbps SFP modules described below.
The media converter module along with the SFP module is user installed directly into the AutoDome's power supply box to provide an integrated fiber optic solution.
Mounts
Bosch offers three mounting options for the AutoDomes: roof, pipe, or pendant arm mounts. The pendant arm mounts come with a connected power supply unit. In addition, Bosch offers an accessory to mount a unit in an upright position on a flat surface.
Bubbles
All housings feature recessed screws and latches for increased tamper resistance. AutoDome in-ceiling models feature an impact-resistant rugged polycarbonate bubble to protect your camera from vandalism. Designed to meet stringent strength standards without compromising optical clarity, the Rugged Bubble can withstand impacts equivalent to a 10 pound (4.5 kilograms) weight dropped from a height of 10 feet (3 meters). AutoDome pendant cameras come equipped with a low-impact, high-resolution acrylic bubble for enhanced image clarity, but can easily be upgraded to the Rugged Bubble when needed.
Both the rugged polycarbonate and the high-resolution acrylic bubbles are available in clear, tinted (smoke), gold and chrome. The clear bubble offers maximum sensitivity by allowing as much light through as possible. The tinted, gold and chrome bubbles offer covertness by making it difficult to see the direction the camera is looking from the outside.
Certifications and Approvals
Region Certification
| Europe CE VG4-1ab-cdefgh, VG4-2ab-cdefgh,VG4-3ab-cdefgh, VG4-5ab-cdefgh, VG4-A-PAxx, VG4-A-PSUxx |
| Electromagnetic Compatibility (EMC) | Complies with FCC Part 15, ICES-003, and CE regulations |
| Product Safety Complies with CE regulations, UL, CSA, EN, and IEC Standards |
Technical Specifications
Central Processor Unit Modules
| VG4-MCPU-100 Unity Pass-through CPU, 100 Series |
| VG4-MCPU-200 Basic CPU, 200 Series |
| VG4-MCPU-300 Standard CPU, 300 Series |
| VG4-MCPU-500 Advanced CPU with Video Content Analysis, 500 Series |
Camera Modules
2.7-13.5 mm Fixed Color Camera
| Availability 100 Series only |
| VG4-MCAM-51 PAL |
| VG4-MCAM-61 NTSC |
| Imager 1/3 in. Interline CCD |
| (752 x 582 PAL)/(768 x 492 NTSC) |
Lens
| Iris Automatic |
| Field of View 78.3° to 18.5° |
| Video Output 1.0 Vp-p, 75 Ohm |
| Gain Control Off, auto (with adjustable limit), and manual |
| Synchronization Line-Lock (0° to 358° vertical phase adjust) or internal crystal |
Aperture Correction Horizontal and vertical
| Horizontal Resolution | 540 TVL (NTSC)/540 TVL (PAL) | |
| Sensitivity (typical) | 30 IRE | 50 IRE |
| SensUp Off | 0.29 lx | 0.9 lx |
| SensUp On (15x) | 0.029 lx | 0.09 lx |
2.7-13.5 mm Fixed Color Camera
| SNR >50 dB |
| White Balance 2500 K to 9000 K (with AWB hold mode and manual mode) |
2.7-13.5 mm Fixed Day/Night Camera
| Availability 100 Series only |
| VG4-MCAM-52 PAL |
| VG4-MCAM-62 NTSC |
| Imager 1/3 in. Interline CCD |
| (752 x 582 PAL)/(768 x 492 NTSC) |
Lens
| Iris Automatic |
| Field of View 78.3° to 18.5° |
| Video Output 1.0 Vp-p, 75 Ohm |
| Gain Control Off, auto (with adjustable limit), and manual |
| Synchronization Line-Lock (0° to 358° vertical phase adjust) or internal crystal |
| Aperture Correction Horizontal and vertical |
| Horizontal Resolution 540 TVL (NTSC)/540 TVL (PAL) |
Sensitivity (typical) 30 IRE 50 IRE
| Day Mode | ||
| SensUp Off 0.29 lx | 0.9 lx | |
| SensUp On (15x) | 0.029 lx | 0.09 lx |
| Night Mode | ||
| SensUp Off 0.12 lx | 0.36 lx | |
| SensUp On (15x) | 0.012 lx | 0.09 lx |
| SNR >50 dB | ||
White Balance 2500 K to 9000 K (with AWB hold mode and manual mode)
5-50 mm Fixed Color Camera
| Availability 100 Series only |
| VG4-MCAM-53 PAL |
| VG4-MCAM-63 NTSC |
| Imager 1/3 in. Interline CCD |
| (752 x 582 PAL)/(768 x 492 NTSC) |
Lens
| Iris Automatic | |
| Field of View 47.5° to 5.0° | |
| Video Output 1.0 Vp-p, 75 Ohm | |
| Gain Control Off, auto (with adjustable limit), and manual | |
| Synchronization Line-Lock (0° to 358° vertical phase adjust) or internal crystal | |
| Aperture Correction Horizontal and vertical | |
| Horizontal Resolution 540 TVL (NTSC)/540 TVL (PAL) | |
| Sensitivity (typical) 30 IRE | 50 IRE |
| SensUp Off 0.42 lx | 1.3 lx |
5-50 mm Fixed Color Camera
| SensUp On (15x) | 0.042 lx | 0.13 lx |
| SNR >50 dB | ||
| White Balance 2500 K to 9000 K (with AWB hold mode and manual mode) | ||
5–50 mm Fixed Day/Night Camera
| Availability 100 Series Only |
| VG4-MCAM-54 PAL |
| VG4-MCAM-64 NTSC |
| Imager 1/3 in. Interline CCD |
| (752 x 582 PAL)/(768 x 492 NTSC) |
Lens
| Iris Automatic |
| Field of View 47.5° to 5.0° |
| Video Output 1.0 Vp-p, 75 Ohm |
| Gain Control Off, auto (with adjustable limit), and manual |
| Synchronization Line-Lock (0° to 358° vertical phase adjust) or internal crystal |
| Aperture Correction Horizontal and vertical |
| Horizontal Resolution 540 TVL (NTSC)/540 TVL (PAL) |
| Sensitivity (typical) 30 IRE | 50 IRE | ||
| Day Mode | |||
| SensUp Off 0.42 lx | 1.3 lx | ||
| SensUp On (15x) | 0.042 lx | 0.13 lx | |
| Night Mode | |||
| SensUp Off 0.17 lx | 0.52 lx | ||
| SensUp On (15x) | 0.017 lx | 0.052 lx | |
| SNR >50 dB | |||
White Balance 2500 K to 9000 K (with AWB hold mode and manual mode)
18x Color Camera
| Availability 200, 300, and 500i Series | |
| VG4-MCAM-11 PAL | |
| VG4-MCAM-21 NTSC | |
| Imager 1/4 in. Exview HAD CCD | |
| (752 x 582 PAL)/(768 x 494 NTSC) | |
| Lens | 18x Zoom (4.1–73.8 mm)F1.4 to F3.0 |
| Focus | Automatic with manual override |
| Iris Automatic with manual override | |
| Field of View 2.7° to 48° | |
| Video Output 1.0 Vp-p, 75 Ohm | |
| Gain Control Off/Auto (with adjustable limit) | |
| Synchronization Line-Lock (-120° to 120° vertical phase adjust) or internal crystal | |
Aperture Correction Horizontal and vertical
18x Color Camera
| Horizontal Resolution NTSC: 470 TVL, typical |
| PAL: 480 TVL, typical |
Sensitivity (typical) 30 IRE 50 IRE
| F1.4, 1/60 (1/50) shutter, 0.5 lx 0.8 lx max AGC |
| Electronic Shutter Speed 1 to 1/10,000 |
SNR >50 dB
| White Balance 2000 K to 10,000 K |
18x Day/Night Camera
| Availability 200, 300, and 500i Series |
VG4-MCAM-12 PAL
| VG4-MCAM-22 NTSC |
Imager 1/4 in. Exview HAD CCD
| (752 x 582 PAL)/(768 x 494 NTSC) |
Lens 18x Zoom (4.1–73.8 mm)
| F1.4 to F3.0 |
Focus Automatic with manual override
| Iris Automatic with manual override |
Field of View 2.7° to 48°
| Video Output 1.0 Vp-p, 75 Ohm |
Gain Control Off/Auto (with adjustable limit)
| Synchronization | Line-Lock ( -120° to 120° vertical phase adjust) or internal crystal |
| Aperture Correction | Horizontal and vertical |
Digital Zoom 12x
| Horizontal Resolution NTSC: 470 TVL, typical |
| PAL: 480 TVL, typical |
Sensitivity (typical) 1 30 IRE 50 IRE
| Day Mode | ||
| SensUp Off | 0.4 lx 0.7 lx | |
| SensUp On (15x) | 0.0041 lx | 0.0082 lx |
Night Mode
| SensUp Off | 0.05 lx 0.17 lx | |
| SensUp On (15x) | 0.0007 lx | 0.0013 lx |
Electronic Shutter Speed 1 to 1/10,000
SNR >50 dB
White Balance 2000 K to 10,000 K
1) F1.4, 1/60 (1/50) shutter, max AGC
26x Day/Night Camera
Availability 200, 300, and 500i Series
VG4-MCAM-13 PAL
VG4-MCAM-23 NTSC
Imager 1/4-in Exview HAD CCD
(752 x 582 PAL)/(768 x 494 NTSC)
26x Day/Night Camera
| Lens 26x Zoom (3.5–91.0 mm)F1.6 to F3.8 | ||
| Focus Automatic with manual override | ||
| Iris Automatic with manual override | ||
| Field of View 2.3° to 55° | ||
| Video Output 1.0 Vp-p, 75 Ohm | ||
| Gain Control Off/Auto (with adjustable limit) | ||
| Synchronization | Line-Lock (-120° to 120° vertical phase ad-just) or internal crystal | |
| Aperture Correction | Horizontal and vertical | |
| Digital Zoom 12x | ||
| Horizontal Resolution NTSC: 470 TVL, typicalPAL: 480 TVL, typical | ||
| Sensitivity (typical) 2 | 30 IRE 50 IRE | |
| Day Mode | ||
| SensUp Off | 0.5 lx 1.0 lx | |
| SensUp On (15x) | 0.0052 lx | .013 lx |
| Night Mode | ||
| SensUp Off | 0.10 lx | 0.26 lx |
| SensUp On (15x) | 0.0013 lx | 0.0026 lx |
| Electronic Shutter Speed 1 to 1/10,000 | ||
| SNR >50 dB | ||
| White Balance 2000 K to 10,000 K | ||
| 2) F1.6, 1/60 (1/50) shutter, max AGC | ||
36x Day/Night Camera
| Availability 300 and 500i Series | |
| VG4-MCAM-14 PAL | |
| VG4-MCAM-24 NTSC | |
| Imager 1/4 in. Exview HAD CCD | |
| (752 x 582 PAL)/(768 x 494 NTSC) | |
| Lens 36x Zoom (3.4–122.4 mm)F1.6 to F4.5 | |
| Focus Automatic with manual override | |
| Iris Automatic with manual override | |
| Field of View 1.7° to 57.8° | |
| Video Output 1.0 Vp-p, 75 Ohm | |
| Gain Control Off/Auto (with adjustable limit) | |
| Synchronization | Line-Lock (-120° to 120° vertical phase ad-just) or internal crystal |
| Aperture Correction | Horizontal and vertical |
| Digital Zoom 12x | |
| Horizontal Resolution 540 TVL (NTSC, PAL) typical | |
| Sensitivity (typical) 3 | 30 IRE 50 IRE |
| Day Mode | |
| SensUp Off | 0.66 lx 1.4 lx |
36x Day/Night Camera
| SensUp On (1/4) (15x) 0.033 lx 0.083 lx |
| Night Mode |
| SensUp Off 0.166 lx 0.33 lx |
| SensUp On (1/4) (15x) 0.0065 lx 0.0164 lx |
| Electronic Shutter Speed 1 to 1/10,000 |
| SNR >50 dB |
| White Balance 2000 K to 10,000 K |
| 3) F1.6, 1/60 (1/50) shutter, max AGC |
Housing Modules
| VG4-MHSG-CC In-ceiling housing with a clear rugged polycarbonate bubble |
| VG4-MHSG-CT In-ceiling housing with a tinted rugged polycarbonate bubble |
| VG4-MHSG-EC Outdoor pendant with a clear high-resolution bubble |
| VG4-MHSG-ET Outdoor pendant with a tinted high-resolution bubble |
| VG4-MHSG-NC Pressurized environmental housing with a clear high-resolution bubble |
| VG4-MHSG-NT Pressurized environmental housing with a tinted high-resolution bubble |
| VG4-MHSG-PC Indoor pendant with a clear high-resolution bubble |
| VG4-MHSG-PT Indoor pendant with a tinted high-resolution bubble |
Communications Modules
| VG4-MTRN-0 Fixed (100 Series) module |
| VG4-MTRN-C Alternative protocol communications module |
| VG4-MTRN-E1 Ethernet (TCP/IP) communications module |
| VG4-MTRN-S Standard analog communications module |
Heating Module
VG4-SHTR-XT Extended temp heater module extends temperature range to -60°C (-76°F) for EnviroDome only
Power Supplies
| Model Input Output | Rating | Input Fuses | Output Fuses | ||
| Camera Heater | |||||
| VG4-A-PSU0F 4 (with integrated fiber optic module) | 24 VAC,50/60 Hz | 24 V @96 VA | 5.0 A | 2.0 A | 3.15 A |
| VG4-A-PSU1 | 120 VAC,50/60 Hz | 24 V @96 VA | 1.6 A | 2.0 A | 3.15 A |
| VG4-A-PSU1F 4 (with integrated fiber optic module) | 120 VAC,50/60 Hz | 24 V @96 VA | 1.6 A | 2.0 A | 3.15 A |
| VG4-A-PSU2 | 230 VAC,50/60 Hz | 24 V @96 VA | 0.8 A | 2.0 A | 3.15 A |
| VG4-A-PSU2F 4 (with integrated fiber optic module) | 230 VAC,50/60 Hz | 24 V @96 VA | 0.8 A | 2.0 A | 3.15 A |
| Certifications | UL, CE, NEMA-rated, Plenum Rated |
| Operating Temperature | -60°C to 50°C (-76°F to 122°F) |
| Humidity | 0% to 100%, condensing |
| Environmental Protection | IP 66, IK 8 (IEC 62262) |
| Color | White |
4) Integrated analog multimode fiber optic video transmitter/data receiver (VG4-SFIBER-MM).
Indoor Power Supplies 5
| Voltage Input | |
| ALTV244UL, ALTV248UL3, ALTV2416ULX3 | 115 VAC ± 10%, 50/60 Hz, 0.9 A |
| Voltage Output | |
| ALTV244UL, ALTV248UL3, ALTV2416ULX3 | 24/28 VAC, unregulated |
Total Output Current
| At 24 VAC | At 28 VAC | Max. Per Channel | |
| ALTV244UL, ALTV248UL3 | 3.5 A | 3.0 A | 3.5 A |
| ALTV2416ULX3 | 7.0 A | 6.0 A | 3.5 A |
| Max. Current Output per Channel | 3.5 A | ||
| Fuse Ratings | 3.5 A | ||
| Main Fuse Ratings | 5.0 A | ||
| Maximum Power Draw | At 24 VAC | At 28 VAC | |
| ALTV244UL, ALTV248UL3 | 84 W | 72 W | |
| ALTV2416ULX3 | 168 W | 144 W | |
5) Available only in the Americas region.
Dimensions (L x H x W)
| ALTV244UL, ALTV248UL3 | 215.9 x 190.5 x 88.9 mm (8.5 x 7.5 x 3.5 in.) |
| ALTV2416ULX3 | 330.2 x 342.9 x 88.9 mm (13.0 x 13.5 x 3.5 in.) |
Certifications
UL, C€, CSA
Accessories - Fiber Optic Kits
VG4-SFIBER-MM
| Description | Multimode Fiber Optic Module |
| Compatible Receiver | LTC 4629 Series |
| Optical Fiber Compatibility | 50/125 μm, 62.5/125 μm, low loss multimode glass fiber, rated for a minimum system bandwidth of 20 MHz |
| Max. Distance6 | 4.0 km (2.5 miles) |
| Optical Budget | 14 dB |
VG4-SFIBER-MM
Connector One (1) ST connector
| Wavelength (video/data) | 850 nm / 1310 nm |
VG4-SFPSCKT
| Description Fiber Optic Ethernet Media Converter kit. Requires a small form-factor pluggable (SFP) module (sold separately). |
Data Interface Ethernet
| Data Rate 10/100 Mbps |
| IEEE 802.3 Compliant |
| Full Duplex or Half Duplex Electrical Port |
| Full Duplex Optical Port |
Compatible Receiver CNFE2MC
| Installation Installed inside a VG4-A-PA1, VG4-A-PA2,VG4-A-PSU1 or a VG4-A-PSU2 power supply boxwith supplied mounting hardware |
SFP Modules
| Description Interchangeable modules available for use with MMF or SMF optical fiber. |
Data Interface Ethernet
| Data Rate 10/100 Mbps | IEEE 802.3 Compliant |
Mechanical
Dimensions (LxWxH)
| SFP-2 and SFP-3 | 55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.) |
| SFP-23, SFP-24, SFP-25, SFP-26 | 63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.) |
Weight (all SFP modules) 0.23 kg (.05 lb)
| Type Connector Wavelength | (1.2 miles) | |||
| Transmit/receive) | ||||
| SFP-2 MMF Duplex LC | 1310 nm / 1310 nm | 2 km | (1.2 miles) | |
| SFP-3 | SMF | Duplex LC | 1310 nm / 1310 nm | 20 km (12.4 miles) |
| SFP-23 | SMF | Single SC | 1310 nm / 1550 nm | 60 km (37.3 miles) |
| SFP-24 | SMF | Single SC | 1550 nm / 1310 nm | 60 km (37.3 miles) |
| SFP-25 | MMF Single SC | 1310 nm / 1550 nm | 2 km | (1.2 miles) |
| SFP-26 | MMF Single SC | 1550 nm / 1310 nm | 2 km | (1.2 miles) |
Fiber Compatibility
| Optical Fiber Compatibility, MMF | 50/125 μm MMF. For 50/125 μm fiber, subtract 4 dB from the specified optical budget value. Must meet or exceed fiber standard ITU-T G.651. |
| Optical Fiber Compatibility, SMF | 8-10/125 μm SMF. Must meet or exceed fiber standard ITU-T G.652. |
| Optical Distance Specifications | Specified transmission distances are limited to the optical loss of the fiber and any additional loss introduced by connectors, splices, and patch panels. The modules are designed to operate over the entire optical loss budget range, so they do not require a minimum loss in order to operate. |
Accessories - Mounts
| VG4-A-PA0 | Pendant arm mount without transformer, white |
| VG4-A-PA0N | Pendant arm mount without transformer, white, for Pres surized Environmental Housing module |
| VG4-A-PA0F7 | Pendant arm mount without transformer, including an in- tealgrated multimode fiber optic module, white |
| VG4-A-PA0FN7 | Pendant arm mount without transformer, including an in- tealgrated multimode fiber optic module, white, for Pres surized Environmental Housing module |
| VG4-A-PA1 | Pendant arm mount with 120 VAC transformer, white |
| VG4-A-PA1N | Pendant arm mount with 120 VAC transformer, white, for Pressurized Environmental Housing module |
| VG4-A-PA1F7 | Pendant arm mount with 120 VAC transformer power sup- ply including an integrated multimode fiber optic module, white |
| VG4-A-PA1FN7 | Pendant arm mount with 120 VAC transformer power sup- ply including an integrated multimode fiber optic module, white, for Pressurized Environmental Housing module |
| VG4-A-PA2 | Pendant arm mount with 230 VAC transformer, white |
| VG4-A-PA2N | Pendant arm mount with 230 VAC transformer, white, for Pressurized Environmental Housing module |
| VG4-A-PA2F7 | Pendant arm mount with 230 VAC transformer power sup- ply including an integrated multimode fiber optic module, white |
| VG4-A-PA2FN7 | Pendant arm mount with 230 VAC transformer power sup- ply including an integrated multimode fiber optic module, white, for Pressurized Environmental Housing module |
| VG4-A-9230 | Roof mount, white |
| LTC 9230/01 | Accessory for mounting a unit in an upright position on a flat surface (for use with VG4-A-9230) |
| VG4-A-9541 | Pole mount adapter for a pendant arm, designed for poles with a diameter between 100–380 mm (4-15 in.) |
| VG4-A-9542 | Corner mount adapter for a pendant arm |
| VG4-A-9543 | Pipe mount, white |
| VG4-A-9543N | Pipe mount, white, for Pressurized Environmental Housing module |
| LTC 9316/00P | Square, heavy duty, steel, 16-ft mounting pole, supports up to 91 kg (200 lbs) |
7) Integrated analog multimode fiber optic video transmitter/data receiver (VG4-SFIBER-MM).
VG4-SBOX-24VAC Box without cover and transformer
VG4-SBOX-120VAC Box, no cover, with a 120 VAC transformer
VG4-SBOX-230VAC Box, no cover, with a 230 VAC transformer
VG4-SBOX-COVER Cover for VG4-SBOX-24VAC, VG4-SBOX-120VAC and VG4-SBOX-230VAC
VG4-SARM Pendant arm with wiring
VG4-SBIM Interface box for in-ceiling housing
VG4-A-ARMPLATE Mounting Plate for VG4-SARM
Accessories - Bubbles
| VG4-SBUB-CCH Rugged Polycarbonate Chrome, for in-ceiling housing | |
| VG4-SBUB-CCL Rugged Polycarbonate Clear, for in-ceiling housing | |
| VG4-SBUB-CGL Rugged Polycarbonate Gold, for in-ceiling housing | |
| VG4-SBUB-CTI Rugged Polycarbonate Tinted, for in-ceiling housing | |
| VG4-SBUB-PCH Rugged Polycarbonate Chrome, for pendant housing | |
| VG4-SBUB-PCH-A High-resolution Chrome, for pendant housing | |
| VG4-SBUB-PCL Rugged Polycarbonate Clear, for pendant housing | |
| VG4-SBUB-PCL-A High-resolution Clear, for pendant housing | |
| VG4-SBUB-PGL Rugged Polycarbonate Gold, for pendant housing | |
| VG4-SBUB-PGL-A | High-resolution Gold, for pendant housing |
| VG4-SBUB-PTI | Rugged Polycarbonate Tinted, for pendant housing |
| VG4-SBUB-PTI-A | High-resolution Tined, for pendant housing |
Ordering Information
| VG4-MCAM-51 AutoDome 2.7-13.5 mm Fixed PAL Color Camera Module2.7-13.5 mm color PAL camera, 1/3 in. CCD, 540 TVL | VG4-MCAM-51 |
| VG4-MCAM-61 AutoDome 2.7-13.5 mm Fixed NTSC Color Camera Module2.7-13.5 mm color NTSC camera, 1/3 in. CCD, 540 TVL | VG4-MCAM-61 |
| VG4-MCAM-52 AutoDome 2.7-13.5 mm Fixed PAL Day/Night Camera Module2.7-13.5 mm day/night PAL camera, 1/3 in. CCD, 540 TVL | VG4-MCAM-52 |
| VG4-MCAM-62 AutoDome 2.7-13.5 mm Fixed NTSC Day/Night Camera Module2.7-13.5 mm day/night NTSC camera, 1/3 in. CCD, 540 TVL | VG4-MCAM-62 |
| VG4-MCAM-53 AutoDome 5-50 mm Fixed PAL Color Camera Module5-50 mm color PAL camera, 1/3 in. CCD, 540 TVL | VG4-MCAM-53 |
| VG4-MCAM-63 AutoDome 5-50 mm Fixed NTSC Color Camera Module5-50 mm color NTSC camera, 1/3 in. CCD, 540 TVL | VG4-MCAM-63 |
Ordering Information
| VG4-MCAM-54 AutoDome 5-50 mm FixedPAL Day/Night Camera Module5-50 mm day/night PAL camera, 1/3 in. CCD,540 TVL | VG4-MCAM-54 |
| VG4-MCAM-64 AutoDome 5-50 mm FixedNTSC Day/Night Camera Module5-50 mm day/night NTSC camera, 1/3 in.CCD, 540 TVL | VG4-MCAM-64 |
| VG4-MCAM-11 AutoDome 18x PAL ColorCamera ModuleHigh-performance, 18x (4.1-73.8 mm) PTZcolor PAL camera, F1.4 to F3.0, 1/4 in. CCD,460 TVL | VG4-MCAM-11 |
| VG4-MCAM-21 AutoDome 18x NTSC ColorCamera ModuleHigh-performance, 18x (4.1-73.8 mm) NTSCcolor PAL camera, F1.4 to F3.0, 1/4 in. CCD,470 TVL | VG4-MCAM-21 |
| VG4-MCAM-12 Autodome 18x PAL Day/Night Camera ModuleHigh-performance, 18x (4.1-73.8 mm) PTZday/night PAL camera, F1.4 to 3.0, 1/4 in.CCD, 460 TVL | VG4-MCAM-12 |
| VG4-MCAM-22 AutoDome 18x NTSC Day/Night Camera ModuleHigh-performance, 18x (4.1-73.8 mm) NTSCday/night camera, F1.4 to F3.0, 1/4 in. CCD,470 TVL | VG4-MCAM-22 |
| VG4-MCAM-13 AutoDome 26x PAL Day/Night Camera ModuleHigh-performance, 26x (3.5-91.0 mm) PALPTZ day/night camera, F1.6 to F3.8, 1/4 in.CCD, 460 TVL | VG4-MCAM-13 |
| VG4-MCAM-23 AutoDome 26x NTSC Day/Night Camera ModuleHigh-performance, 26x (3.5-91.0 mm) NTSCPTZ day/night camera, F1.6 to F3.8, 1/4 in.CCD, 470 TVL | VG4-MCAM-23 |
| VG4-MCAM-14 AutoDome 36x PAL Day/Night Camera ModuleHigh-performance, 36x (3.4-122.4 mm) PTZDay/Night PAL camera, F1.6 to F4.5, 1/4 in.CCD, 540 TVL | VG4-MCAM-14 |
| VG4-MCAM-24 AutoDome 36x NTSC Day/Night Camera ModuleHigh-performance, 36x (3.4-122.4 mm) PTZDay/Night NTSC camera, F1.6 to F4.5, 1/4 in.CCD, 540 TVL | VG4-MCAM-24 |
| VG4-MCPU-100 AutoDome Unity Pass-through CPU Module | VG4-MCPU-100 |
| VG4-MCPU-200 AutoDome Basic CPUModule | VG4-MCPU-200 |
| VG4-MCPU-300 AutoDome Standard CPUModule | VG4-MCPU-300 |
Ordering Information
| VG4-MCPU-500 AutoDome Advanced CPU Module with VCA | VG4-MCPU-500 |
| VG4-MTRN-C Alternative Protocol Communications Module | VG4-MTRN-C |
| VG4-MTRN-E AutoDome TCP/IP Communications Module | VG4-MTRN-E |
| VG4-MTRN-E1 AutoDome® TCP/IP Communications ModuleH.264 TCP/IP (Ethernet) communications module for AutoDome 100, 200, 300 and 500i Series products | VG4-MTRN-E1 |
| VG4-MTRN-0 Autodome Fixed Communications Module | VG4-MTRN-0 |
| VG4-MTRN-S AutoDome Standard Analog Communications Module | VG4-MTRN-S |
| VG4-SFIBER-MM Analog Multimode Fiber Optic KitAnalog multimode video transmitter/data receiver fiber optic kit | VG4-SFIBER-MM |
| VG4-SFPSCKT Fiber Optic Ethernet Media Converter KitEthernet media converter video transmitter/ data receiver fiber optic kit | VG4-SFPSCKT |
| VG4-MHSG-CC AutoDome In-ceiling Clear Housing ModuleIn-ceiling housing with a clear rugged polycarbonate bubble | VG4-MHSG-CC |
| VG4-MHSG-CT AutoDome In-ceiling Tinted Housing ModuleIn-ceiling housing with a tinted rugged polycarbonate bubble | VG4-MHSG-CT |
| VG4-MHSG-EC AutoDome Outdoor Clear Pendant Housing ModuleOutdoor pendant housing with a clear high-resolution bubble | VG4-MHSG-EC |
| VG4-MHSG-ET AutoDome Outdoor Tinted Pendant Housing ModuleOutdoor pendant housing with a tinted high-resolution bubble | VG4-MHSG-ET |
| VG4-MHSG-NC Pressurized Environmental Housing ModulePressurized environmental housing for VG4 AutoDome Modular Camera System, includes a clear high-resolution bubble | VG4-MHSG-NC |
| VG4-MHSG-NT Pressurized Environmental Housing ModulePressurized environmental housing for VG4 AutoDome Modular Camera System, includes a tinted high-resolution bubble | VG4-MHSG-NT |
| VG4-MHSG-PC AutoDome Indoor Clear Pendant Housing ModuleIndoor pendant housing with a clear high-resolution bubble | VG4-MHSG-PC |
Ordering Information
| VG4-MHSG-PT AutoDome Indoor Tinted Pendant Housing ModuleIndoor pendant housing with a tinted high-resolution bubble | VG4-MHSG-PT |
| VG4-SBUB-CCH Rugged Chrome Bubble for an In-ceiling HousingChrome rugged polycarbonate bubble for an in-ceiling housing | VG4-SBUB-CCH |
| VG4-SBUB-CCL Rugged Clear Bubble for an In-ceiling HousingClear rugged polycarbonate bubble for an in-ceiling housing | VG4-SBUB-CCL |
| VG4-SBUB-CGL Rugged Gold Bubble for an In-ceiling HousingGold rugged polycarbonate bubble for an in-ceiling housing | VG4-SBUB-CGL |
| VG4-SBUB-CTI Rugged Tinted Bubble for an In-ceiling HousingTinted rugged polycarbonate bubble for an in-ceiling housing | VG4-SBUB-CTI |
| VG4-SBUB-PCH Rugged Chrome Bubble for a Pendant HousingChrome rugged polycarbonate bubble for a pendant housing | VG4-SBUB-PCH |
| VG4-SBUB-PCH-A High-resolution Chrome Bubble for Pendant HousingChrome high-resolution bubble for a pendant housing | VG4-SBUB-PCH-A |
| VG4-SBUB-PCL Rugged Clear Bubble for a Pendant HousingClear rugged polycarbonate bubble for a pendant housing | VG4-SBUB-PCL |
| VG4-SBUB-PCL-A High-resolution Clear Bubble for a Pendant HousingClear high-resolution bubble for a pendant housing | VG4-SBUB-PCL-A |
| VG4-SBUB-PGL Rugged Gold Bubble for a Pendant HousingGold rugged polycarbonate bubble for a pendant housing | VG4-SBUB-PGL |
| VG4-SBUB-PGL-A High-resolution Gold Bubble for Pendant HousingGold high-resolution bubble for a pendant housing | VG4-SBUB-PGL-A |
| VG4-SBUB-PTI Rugged Tinted Bubble for a Pendant HousingTinted rugged polycarbonate bubble for a pendant housing | VG4-SBUB-PTI |
| VG4-SBUB-PTI-A High-resolution Tinted Bubble for a Pendant HousingTinted high-resolution bubble for a pendant housing | VG4-SBUB-PTI-A |
Ordering Information
| Accessories | |
| ALTV244UL 120 VAC Power SupplyFour-channel, 120 VAC, 60 Hz, 84 VA out, wall mount, indoor | ALTV244UL |
| ALTV248UL3 8-channel Indoor Power Supply, 120 VACEight-channel, 120 VAC input, 24/28 VAC output, 3.5 A total output, indoor | ALTV248UL3 |
| ALTV2416ULX3 16-channel Indoor Power Supply, 120 VACSixteen-channel, 120 VAC input, 24/28 VAC output, 7 A total output, indoor | ALTV2416ULX3 |
| LTC 9230/01 Flat Roof Mount Adapterfor mounting a unit in an upright position on a flat surface for roof parapet mount LTC 9230/00 | LTC 9230/01 |
| VG4-A-9230 Roof MountRoof mount, white | VG4-A-9230 |
| LTC 9316/00P Standard PoleSquare, heavy duty, steel, 16-ft mounting pole,supports up to 91 kg (200 lbs) | LTC 9316/00P |
| LTC 9349MK In-ceiling Mounting KitIn-ceiling mounting kit | LTC 9349MK |
| VG4-A-9541 Pole Mount AdapterPole mount adapter for a pendant arm, designed for poles with a diameter from 100–380 mm (4–15 in.), white | VG4-A-9541 |
| VG4-A-9542 Corner Mount AdapterCorner mount adapter for a pendant arm | VG4-A-9542 |
| VG4-A-9543 Pipe MountPipe mount, white | VG4-A-9543 |
| VG4-A-9543N Pipe Mount (for Pressure Dome)Pipe mount, white, for Pressurized Environmental Housing Module | VG4-A-9543N |
| VG4-A-PA0 Pendant Arm MountPendant arm mount, no transformer, white | VG4-A-PA0 |
| VG4-A-PAON Pendant Arm Mount (for Pressure Dome)Pendant arm mount, no transformer, white, for Pressurized Environmental Housing Module | VG4-A-PAON |
| VG4-A-PAOF Pendant Arm Mount with Fiber Optic ModulePendant arm mount, no transformer, with an integrated analog multimode fiber optic video transmitter/data receiver module, white | VG4-A-PAOF |
| VG4-A-PAOFN Pendant Arm Mount with Fiber Optic Module (for Pressure Dome)Pendant arm mount, no transformer, with an integrated analog multimode fiber optic video transmitter/data receiver module, white, for Pressurized Environmental Housing Module | VG4-A-PAOFN |
Ordering Information
| VG4-A-PA1 Pendant Arm Mount with 120 VAC TransformerPendant arm mount with a 120 VAC transformer, white | VG4-A-PA1 |
| VG4-A-PA1N Pendant Arm Mount (for Pressure Dome) with 120 VAC TransformerPendant arm mount with a 120 VAC transformer, white, for Pressurized Environmental Housing | VG4-A-PA1N |
| VG4-A-PA1F Pendant Arm Mount with Fiber Optic Module with 120 VAC TransformerPendant arm mount with an integrated analog multimode fiber optic video transmitter/data receiver module and a 120 transformer, white | VG4-A-PA1F |
| VG4-A-PA1FN Pendant Arm Mount with Fiber Optic Module (for Pressure Dome) with 120 VAC TransformerPendant arm mount with an integrated analog multimode fiber optic video transmitter/data receiver module and a 120 VAC transformer, white, for Pressurized Environmental Housing Module | VG4-A-PA1FN |
| VG4-A-PA2 Pendant Arm Mount with 230 VAC TransformerPendant arm mount with a 230 VAC transformer, white | VG4-A-PA2 |
| VG4-A-PA2N Pendant Arm Mount (for Pressure Dome) with 230 VAC TransformerPendant arm mount with a 230 VAC transformer, white, for Pressurized Environmental Housing Module | VG4-A-PA2N |
| VG4-A-PA2F Pendant Arm Mount with Fiber Optic Module with 230 VAC TransformerPendant arm mount with an integrated analog multimode fiber optic video transmitter/data receiver module and a 230 VAC transformer, white | VG4-A-PA2F |
| VG4-A-PA2FN Pendant Arm Mount with Fiber Optic Module (for Pressure Dome) with 230 VAC TransformerPendant arm mount with an integrated analog multimode fiber optic video transmitter/data receiver module and a 230 VAC transformer, white, for Pressurized Environmental Housing Module | VG4-A-PA2FN |
| VG4-A-PSU0F 24 VAC Power Supply Unit with Fiber Optic Module24 VAC, NEMA-rated with an integrated analog multimode fiber optic video transmitter/data receiver module, white | VG4-A-PSU0F |
| VG4-A-PSU1 120 VAC Power Supply Unit120 VAC, 100 W, NEMA-rated, white | VG4-A-PSU1 |
| VG4-A-PSU1F 120 VAC Power Supply Unit with Fiber Optic Module120 VAC, 100 W, NEMA-rated with an integrated analog multimode fiber optic video transmitter/data receiver module, white | VG4-A-PSU1F |
Ordering Information
| VG4-A-PSU2 230 VAC Power Supply Unit230 VAC, 100 W, NEMA-rated, white | VG4-A-PSU2 |
| VG4-A-PSU2F 230 VAC Power Supply Unitwith Fiber Optic Module230 VAC, 100 W, NEMA-rated with an integrated analog multimode fiber optic videotransmitter/data receiver module, white | VG4-A-PSU2F |
| VG4-A-ARMPLATE Mounting PlateMounting plate for VG4-SARM | VG4-A-ARMPLATE |
| VG4-SARM Pendant Arm with Wiring VG4-SARM | |
| VG4-SBIM Interface Box for In-ceilingHousing | VG4-SBIM |
| VG4-SBOX-24VAC Power Supply BoxBox without cover or transformer | VG4-SBOX-24VAC |
| VG4-SBOX-120VAC Power Supply BoxBox, without cover, with a 120 VAC transform-er | VG4-SBOX-120VAC |
| VG4-SBOX-230VAC Power Supply BoxBox, without cover, with a 230 VAC transform-er | VG4-SBOX-230VAC |
| VG4-SBOX-COVER Cover for Power SupplyBoxCover for VG4-SBOX-24VAC, VG4-SBOX-120VAC, VG4-SBOX-230VAC, andEX30 junction box | VG4-SBOX-COVER |
| VG4-SHTR-XT Heating ModuleExtended temperature heater module extendstemperature range to -60°C (-76°F) for EnviroDome® only | VG4-SHTR-XT |
| Software Options | |
| VP-CFGSFT Bilinx Configuration Toolconfiguration software with USB adapter | VP-CFGSFT |
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 00
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: +31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6258 5511
Fax: +65 6571 2698
apr.securitysystems@bosch.com
www.boschsecurity.com