SD726MB - DVD player SSL - Free user manual and instructions

Product Type	DVD Player
Model	SD726MB
Brand	SSL
Disc Compatibility	DVD, DVD±R/RW, CD, CD-R/RW
Video Outputs	Composite, Component, HDMI
Audio Outputs	Stereo RCA, Coaxial, Optical
Playback Formats	MPEG-2, MPEG-4, DivX, MP3, JPEG
Dimensions (W x D x H)	430 x 260 x 40 mm
Weight	2.0 kg
Power Supply	AC 100-240V, 50/60Hz
Power Consumption	15 W (typical), <1 W standby
Remote Control	Included (batteries not included)
Region Code	2 (Europe) or code-free (check model)
Parental Control	Password-protected disc rating limit
Playback Functions	Pause, Step, Slow, Zoom, Repeat, A-B Repeat
On-Screen Display	Multi-language OSD
Maintenance	Clean lens with dry cloth; use lens cleaner disc monthly
Safety	Automatic shut-off after idle period; surge protection
Spare Parts & Repairability	Remote control, power adapter available from SSL

Frequently Asked Questions - SD726MB SSL

What types of discs can the SD726MB play?

The SD726MB plays DVD, DVD±R/RW, CD, and CD-R/RW discs. It also supports playback of MP3, JPEG, and DivX files.

How do I connect the DVD player to my TV?

Use an HDMI cable for best quality. Alternatively, you can use component or composite video cables. For audio, connect the stereo RCA outputs or use coaxial/optical digital output for surround sound.

How do I change the region code on my SD726MB?

Region codes are typically locked per model. Some units may be region-free. To change region, you may need a modification disc or firmware update. Check the manual or contact SSL support.

Why is there no picture on my TV?

Ensure the TV is set to the correct input source. Check that all cables are securely connected. If using HDMI, try a different cable. Also verify the disc is clean and correct region.

How do I clean the DVD player lens?

Use a lens cleaning disc (available at electronics stores) to gently clean the laser lens. Do not use liquids or compressed air directly on the lens.

Can I play DVDs from a different region?

Most DVD players are region-locked. The SD726MB is typically set to Region 2 (Europe). Playing discs from other regions may not work unless the player is modified.

What should I do if the player won't turn on?

Check the power cord and outlet. Ensure the power switch on the back of the unit is on. Try a different appliance in the same outlet. If nothing works, contact SSL service.

How can I reset the DVD player?

Unplug the player from the power outlet for 30 seconds, then plug it back in. This performs a soft reset and clears minor glitches.

Does the SD726MB support USB playback?

No, the SD726MB does not have a USB port. It only plays discs. For media files, use a compatible USB DVD drive or a media player.

Where can I get a replacement remote control?

Replacement remotes are available from SSL customer service or online retailers. Use the model number SD726MB to ensure compatibility.

USER MANUAL SD726MB SSL

PHONE:1.888.38.STORM

1-805.983.8008

FAX:[phone]

TECHNICAL SUPPORT

www.soundstormlab.com

0814

User's Manual

SD726MB

BLUETOOTH®-ENABLED

DVD/MP3 CD AM/FM RECEIVER

WITH MOTORIZED FLIP-OUT 7" WIDESCREEN TOUCHSCREEN

DIGITAL TFT MONITOR

INSTRUCTIONS

CONTENTS

Panel Introduction 02

Basic Function 03

Remote Control Operation 05

Turn on/off 07

Access main interface 07

USB/SD Card Operation 07

Radio Operation 08

Disc Operation 09

Play/Eject Disc 09

DVD/VCD Disc Playback 09

CD Disc Playback 09

MP3/WMA Format Disc Playback 09

Touch Menu 09

BT Operation 11

ST. Wheel setting 12

External input operation 12

Calendar 12

Calculator 12

Other Operation 13

Rear view function 13

Access setup interface 14

General setting 14

Audio setting 14

Video setting 14

Language setting 14

Time setting 14

Version 15

Touch calibration 15

Wiring Diagram 17

Trouble shooting 17

Specifications 18

Accessory 19

DVD Parental control function 19

Warning: To ensure safety while driving and to comply with laws, drivers should not watch video or operate the video device while driving.

INSTRUCTIONS

INSTRUCTIONS

PANEL INTRODUCTION

02

ACCESSORY

Accessory	Quantity
Wire	1PC
USB Cable	1PC
Keys	2PCS
Remote controller	1PC
Warranty card	2PCS

DVD Parental control function

DVD Parental control function

★ DVD Parental control function: The default set for DVD is #8 adult, which means all grades of DVD can be read without entering password. To change the default grade, you need to follow the below procedure: Press SETUP button on the remote, display will show the system set up menu and the submenu, select password and enter 0000, you will be able to choose the DVD grade as default.

INSTRUCTIONS

BASIC FUNCTION

SPECIFICATIONS

Power supply DC 12V

Power range 10.8-16.0V DC

Max Current Consumption 15A

Ground system - Negative ground

Power Output 85 WattsX4 Channels

FM tuner

US frequency range 87.5-107.9MHz

European frequency range 87.5-108MHz

Signal / Noise ratio---- 55dB

Stereo separation 30dB

Search station volt 20-30dBuv

AM tuner

US frequency range 530-1710KHz

European frequency range 522-1620KHz

Limit noise sensitivity 32dB

DVD player

S/N Ratio 70dB

Frequency response 20Hz-20KHz

1. ⏻ /OPEN

Press the button to open / close the screen.

Press this button for short moment to turn on power, and long press it to turn off power.

2. SEEK Knob / (↔ / ≈) / (SEEK+ / SEEK-)/ (SEEK / SÊEK)(Speed forward / backward / Select station / song)

In radio mode, press / rotate the knob to select station upward / backward.

Long press / rotate the knob to automatically scan station.

In playback mode, short press / rotate the knob to select song upward / backward,

long press / rotate it to achieve speed forward / backward function.

3. MIC Input

Bluetooth microphone input socket.

4. RELEASE Button

Press this button to release the panel.

5. MODE Button

When the unit is power on, Repeat press this button can switch to different function

mode as following picture.

Note: When the device without

connecting to USB、SD or DVD

no disc inside, the system will

automatically skip these related

working mode.

6. (VOL/SEL) Volume adjustment mode

Repeat pressing this button can select the VOL、BAS、TRE、BAL、FAD adjustment mode,

Then can rotate the button to adjust VOL、BAS、TRE、BAL、FAD as you like.

7. MUTE/TFT ON/OFF Button

Press this button to shut off sound output, repress this button to resume sound output; Long press this button longer to turn on / off TFT LCD display.

8. Number Button 1 / ▶II

In radio mode, press this button to hear radio preset;

In disc playback mode, press this button for Play/Pause.

9. Number Button 2 / RPT (Repeat Playback)

In radio mode, press this button to hear radio preset;

In disc playback mode, press this button to repeat the current track indefinitely.

10. Number Button 3 / RDM (Random playback)

In radio mode, press this button to hear radio preset;

In disc playback mode, press this button to play frocks on the disc in random order.

INSTRUCTIONS

WIRING DIAGRAM

11. Number Button 4 / ■

In radio mode, press this button to hear radio preset; In disc playback mode, press this button for to stop playback.

12. Number Button 5 / ▼

In playback mode, press the button to adjust the angle of screen.

13. Number Button 6 /▲

In playback mode, press the button to adjust the angle of screen.

14. Dual (front and rear)USB

Warning: You can only use either front or rear USB at a time. never connect both front and rear USB at the same time! This could cause malfunctions.

15. Dual (front and rear)AUX

▲ Warning :You can only use either front or rear AUX at a time, never connect both front and rear AUX at the same time!

16. IR

To receive infrared signal from the remote control.

17.

When there is a disc in the unit, press the button to eject the disc.

18. SD

Insert SD/MMC card, the unit will play the files automatically.

19. RESET

Press this button can back to default mode.

This player is equipped with ISO standard connector, please follow below instruction:

● Red - ACC ON (+12V)

● Yellow – 12 V Constant

- Black – Ground wire

● Blue - Power Antenna / Remote Amp Turn On

● Violet/White-Reverse Gear Signal (+)

● Grey/Grey black - Right front speaker (+/-)

● White/White black - Left front speaker (+/-)

● Purple/Purple black - Right rear speaker (+/-)

● Green/Green black - Left rear speaker (+/-)

● Light Green-Parking Brake (-)

TROUBLE SHOOTING
PROBLEM
CAUSE SOLUTION

Cannot power on	Check fuse	Change fuse same as the old one
	Some factors cause MPU wrong operation	Press RES button on the panel by penpoint, then, power on
After ignition switch off, setting information all lose	Change battery or fuse	Reset information and save
Poor performance of radio station	Weak signal	Move the car to another place, then research
Cannot load disk	There is a disk inside	Remove disc before inserting another one
Cannot play disc	Disc is scratched	Change new disc
	Put wrong side of disc into the unit	Insert in the disk with sign side up
	Lens is dirty	Clean lens by lens clean disc
Cannot switch language/subtitle	There is only one language/ subtitle in disc	If disc is not with multi-language/subtitle, it cannot switch language/subtitle
No image	Other factors cause MPU wrong operation	Press RES button on the panel by penpoint, then, power on
Cannot watch image during driving	It's not allowed to watch image during driving	Park the car in a safe place, put the car stall in "P" position, pull up the hand brake, parking brake wire must be grounded

Touch screen Calibration

Remote Control Operation

Please follow the below instructions to calibrate when there is no touch or touch is not accurate.

Step 1: Press the mode button in the unit to switch to DVD mode.

Step 2: Insert a DVD disc, after DVD is loaded, press the stop button "💡" as show in picture (1). in the remote short, the unit will display as show in picture (2).

Picture (1) Picture (2)

Step 3: Press “ZOOM” in the remote as show in picture (3), the unit will display as show in picture (4).

Picture (3) Picture (4)

Step 4: Press "▲" button in the remote and then quickly press "▼" button as show in picture (5) and you will enter the touch calibration interface as show in picture (6).

Picture (5) Picture (6)

Step 5: Use the touch pen to touch top left corner, top right corner, down right corner, down left corner, when the cross cursor stop at each corner, touch the center of the cursor. Then the panel will display OK and leave the calibration interface and the unit regained touch as show in picture (7).

Picture (7)

REMOTE CONTROL FUNCTION

1 POWER ON/OFF

2 MUTE

3 DSP

4 SOURCE

SOURCE

B EQ

6 SEEK+/SEEK-

7 VOL+/VOL-

B SELECT

1 LOUR

10 DAND P.M.

BAND-PIN

11 LOC/RDM

12 STOP

13 PLAY / PAUSE

14 MOIST-PROG

15 0-10+

10 AMS/RPT

17 TITLE

10 AUDIO

10 ADDIO

19 GO TO

20 SUB TITLE

21 PBC

22 UP/DOWN/LR ENTER

23 SLOW

20 LEDV 21 ANOLED

24 ANGLE

25 SETUP

26 OSD

27 ZOOM

20 MENU

1. SOURCE Button

Press this button to change mode.

1. EQ Button

Press this button to choose POP、ROCK、CLASSIC、EQ off.

1. SEEK+ (▶) / SEEK-(◀) Button

In normal playback MP3、USB、SD songs, Press this button to previous song or next song.

1. VOL+ (▶) / VOL- (◀)

Press this button to increase or decrease volume level.

1. SELECT Button

Press this button to choose sound feature.

1. LOUD Button

Press this button to startup LOUD function.

1. BAND-P/N Button

In radio mode, press this button to choose band.

In VCD、DVD mode, press this button to choose PAL、AUTO or NTSC system.

1. LOC/RDM Button

In radio mode, press this button to switch between local and direction.

In VCD、CD mode, press this key to randomly play.

1. STOP Button

Press this button to stop playing.

1. PLAY/PAUSE Button

Press this button to switch between play and pause.

In stop mode, press this button to play.

1. MO/ST-PROG Button

In radio mode, press this button to choose stereo or mono station.

In audio mode, it can help STOP button to programmed play.

INSTRUCTIONS

INSTRUCTIONS

15. 0-10+ Button

Press this button to choose desired song, section, preset stations. Decimal numbers, for example the 19th song, press 10+ and 9 button.

16. AMS / RPT Button

In radio mode, press this button to browse stored stations.

In audio mode, press this button to play repeatedly.

17. TITLE Button

In DVD mode, press this button to play back to the top menu of disc.

18. AUDIO Button

In DVD mode, press this button to switch language of dialogue.

In VCD mode, press this button to choose left track, right track and stereo.

19. GO TO

In DVD mode, press this button, you can define playing time.

20. SUB TITLE Button

In DVD mode, press this button to switch language of subtitle.

21. PBC Button

In VCD mode, press this button to display all song menus, work with number button to choose songs.

When playing MP3, USB, SD returns to song menu, up, down selections can be up / "☐" button or down / "☐" key to select up and down, select and press "☐" key to confirm.

The selected tracks can be played. Press the left or right arrow keys to "☐" or "☐" key, can be on the next page function operation.

23. SLOW Button

In audio mode, press this button to slow backward and slow forward.

24. ANGLE Button

In DVD mode, press this button to change play angle.

25. SETUP Button

In audio mode, press this button to choose different set items.

26. OSD Display

Press this button to display the title chapter and the left time.

27. ZOOM Button

In DVD/VCD mode, press this button to ZOOM in.

28. MENU Button

Press button to back to the main menu.

BATTERY CHANGE

When control distance of remote control becomes shorter or no function, please change battery. Please confirm polarity before change.

One hand press stopper, then pull out battery.

Put battery into controller.

Insert battery holder into controller.

Version

Touch the icon [ ] in setting interface to enter the interface below to check the software version number of DISC/MCU/TFT/BT (The version information is displayed please prevail in kind.)

Touch calibration

If the touch position is biased, you may touch the icon "Calibrate" for calibration.

Touch the icon[ ] in setting interface to find the setting bar [ Calibration < Select > ], and then touch any icon[ < > ] to enter the following calibrating interface.

Touching methods

Use touch pen to click the center of "+" icon, and move along with center of "+" icon so as to calibrate the screen. It shall automatically save data and exit after screen calibration. Please accurately click all positions on screen, or the accuracy of touch calibration shall be affected.

Access setup interface

Turn on/off

Click [Setting] icon on main interface to access setup interface.

General setting

Click 📞 icon on setup interface to access general setting interface, as shown in below PIC 1 diagram: In General setting interface, you may set the functions On or Off, or click the icon [8] to preview the wallpapers up and down and set your favorite wallpaper

PIC 1

Wallpaper

Touch the icon[ Wallpaper < Wallpaper > ]in wallpaper bar[ <>]to change the wallpaper.

Audio setting

Click icon on setup interface to access audio setting interface, as shown in right (PIC 2) diagram: You can turn on or turn off the existing functions on audio setting interface and adjust the rearview volume.

PIC 2

Video setting

Click □ icon on setup interface to access video setting interface, as shown in right (PIC 3) diagram: At video setting interface, you can adjust brightness, contrast, saturation and hue of the video.

PIC 3

Language setting

During use, you can select your familiar language to display menu by language setup. Click icon on setup interface to access language setting interface, as shown in right (PIC 4) diagram: In the languagebar [ ] you need to set, touch the correspondingicon[ ] to select your familiar language.

PIC 4

Time setting

Click icon on ☐ setup interface to access time setting interface.as shown in right (PIC 5) diagram: Touch the icon [ ] of Time mode, Year, Month, Date, Hour, Minute for setting.

PIC 5

When the ignition switch is put in ACC or ON position, Press power on the front panel to turn on the unit. After the host starts, hold power button for 3 seconds, the host will turn off.

Access main interface

Turned on, the interface to return the icon to switch to the main interface. As shown below:

Touch the function icons so as to access the corresponding function operations. Touch the [ ] icon or use the touch pen/finger gently sliding around the screen to switch to the main menu page.

USB/SD Card Operation

When there is a USB device/SD card connected, the unit can conduct the playback of audio/video/image files in the USB device/SD card.

Insert/Eject USB storage device

1. Connect a U disc recorded with media information to the unit by a USB connecting cable.
2. When there is a need to eject the USB device, exit the USB device playback screen first, and then take out the device.

Insert/eject SD card

1. Insert a SD card recorded with media information into the SD card slot in the unit correctly until it is locked.
2. When pulling out the SD card, exit SD card playing state first, then press the SD card and it shall pop up after unlocking.

Enter/exit

Insert a USB storage device or SD card to automatically play data contained in it. If the unit has connected with a USB device or SD card, touch [USB] icon in the multimedia interface to enter into the external storage playback interface; Touch [SD] icon to enter into the SD card playback interface. During playback, touch the top center area of the screen to pop up the touch menu, operate touch menu to perform various playback controls.

Play

After SD card/USB removable device being read out, the operation methods are similar to disk operation methods.

Radio Operation

Other Operation

1. Enter/exit

Touch [Radio] icon in the main interface to enter into the radio interface.

Touch 📋 icon to return to main interface, and then touch other function icons so as to exit radio mode.

2. MUTE on/off

Click icon to switch MUTE on and off.

3. Loudness on/off

Click ● icon so as to turn on/off loudness function.

4. Search/Save radio stations

Short press 🔒 icon to browse the stored radio stations.

FM band can save 18 radio stations (Six stations for

FM1/FM2/FM3), AM band can save 12 radio stations

(Six stations for AM1/AM2).

5. Band selection

Click icon so as to switch among FM1, FM2, FM3, AM1,

AM2 bands.

6. Turn on/off the Long/Short-range

Click x icon, the search pattern in the local search (LOC) and remote search (DX) switch between.

LOC feature is turned on after the signal is strong enough only to listen to those in good condition and receiving radio station; DX enabled, you can receive remote weak radio signals.

Note: This function is available only when FM band is selected.

7. Stereo on/off

When receiving stereo signals, click 📄 icon to turn on/off stereo.

8. TA (Receive traffic information)

ON: When the traffic station is turned on, the radio will automatically search for traffic stations. After a station is searched, screen displays "TP". Only when traffic information is broadcasted can it be received, after traffic information is completed, the radio will automatically switch to the previous mode.

OFF: Repress [TA] button to close TA function. In other modes, traffic announcement will automatically switch to radio mode, after the traffic announcement is completed, it will automatically switch to the previous mode.

9. AF

Touch the button to turn the AF function on/off. AF function is turned on, When the received station signals become weak, the radio will automatically fine-tune to other frequencies. When receiving an emergency announcing, the screen will display warning message.

10. PTY

Touch the button the screen displays program types, users can search station according to program type.

Note: If the unit does not have RDS function, it has no AF/TA/PTY function.

Rear view function

In any running state, the video signal can switch to reverse video state when reversing the car, and the system shall return to its initial running state after reversing the car.

Warning

Do not rely on CCD system completely, please make sure you use direct eyesight while driving. Back rearview system only assists in driving. As the distance range of rearview system is limited, completely relying on the rearview system during driving may cause accidents.

Reverse field simulation

Rearview backup image

ST. Wheel setting

Disc Operation

1. Click on the [icon] icon in the main interface into the SWC. settings interface.

2. The original vehicle to the control line positive, negative with the machine control line in the positive and negative connection.

3. Click the SWC buttons will appear corresponding operating tips, and fundamental operation prompts the SWC feature set.

4. Set function to save the settings and click the Confirm icon to confirm.

Note: To modify function settings, repeat procedures 3\~4. To reset functions, click Reset icon, all the settings set before shall be cleared, repeat procedures 3\~4 for resetting.

External input operation

Connect the video input plug with external video input jack, and connect the audio input plug with external audio input jack. Touch [AUX-IN] icon on main interface to access external AUX-IN interface.

Audio → You can adjust the volume, bass, pitch for input audio. You can adjust the speaker volume by adjusting the front and back, left and right column. Video → You can adjust the brightness, contrast, saturation and hue for input video. You can also choose the video standard mode.

Calendar

Touch the icon [icon] in main interface to enter the following Calendar interface:

Calculator

Touch the icon [icon] in main interface to enter calculator interface to operate +/−/×/÷

1. Play/eject disc

Play disc

Insert the disc into the disc slot with the printing surface up, system will detect the disc and automatically take it in to read and play.

Eject disc

(1) Click【▲】button on the panel to eject the disc.

(2) If a disc has not been took away 15 seconds after it is ejected, system will automatically take in the disc but not play.

Do not insert two discs or more.

2. DVD/VCD disc playback

During playback of disc, touch the middle lower area of the screen to pop up the touch menu, operate the touch menu to perform various playback controls. (PIC 1)

3. CD Disc Playback

After a CD is inserted, system shall access disk reading state immediately.

When there is a disk in the device, click [Disk] at the main interface so as to access disk reading state. After the disk being read out, system shall automatically play in sequence.

PIC 1

4. MP3/JPEG/MPEG4 disk playing

When the disk contains readable files, such as MP3/JPEG/MPEG4 files, it shall be automatically read out and played after slipping into DVD player. During playing, touch the screen area and the touch menu shall pop up. Operate the touch menu for various playing.

5. Touch Menu Function Description

— MUTE

Touch this icon to switch MUTE on and off.

Play/pause

Touch the button to pause, retouch it to continue to play.

Stop

Touch the button to enter into pre stop status.

▶

Consecutively touch this button to select the speed of fast-forward/fast-backward.

▶

Touch the button to select the previous/next song.

→

Touch it to access the next menu interface.

Disc

Touch this icon to eject disc.

Stereo on/off

Touch it so as to turn on/off stereo.

INSTRUCTIONS

BT Operation

Return to root menu

Touch this icon, it shall return to root menu of disk in DVD state and access PBC menu playing in VCD state. All chapters in the disk shall be displayed on the interface, touch the chapter icon directly for playing.

Access title menu

Press this button to return to title menu of the disk. Directly click menu bar at title menu interface for playing.

Repeat play

In playing state, touch this button to start repeat play function:

Chapter repeat → Title repeat → Repeat All → Off

During VCD playing, this function only works when PBC is off.

Language selection

Touch this button to select language.

Digit keyboard

Touch this button and digit keyboard shall appear, click number buttons directly to select tracks for playing.

Switch play order

Touch this button to switch the play order.

Zoom in/Zoom out image

Touch this button to zoom in /zoom out the image.

★ Under audio/video playing mode or radio mode, the screen center will display the picture below when adjusting the volume button.

Setting

Touch this button to enter setting interface

EQ

Touch this icon to display EQ mode one by one for selecting.

Touch the icon [ ] in main interface or under Radio/SD/USB/Media/BT Music status

to enter BT [ ] main interface;

Touch ➕ icon to exit BT interface.

2. Pair/link

To use BT hand-free function, make connection first, i.e. match the host with the BT mobile phone.

Operation methods:

Set the host to be matching state, and open the BT of your mobile phone and use the mobile phone to search device, the mobile phone shall prompt to match password with the BT when it has searched the BT device.

Input BT password (0000) to the mobile phone and confirm. The mobile phone shall prompt whether authorize to this device, please select [Yes]. Phone and BT shall automatically connect within 20 seconds. Under any working mode, the host shall convert to BT state if there is an incoming call. And the host shall restore to current mode after hanging up.

When the BT device matches with this device, the connection status shall display "device paired", otherwise, it shall display "SEARCHING FOR DEVICE". After connect successfully, will show BT friendly name "BOSS AUDIO

3. Dialing

You can dial on mobile phone directly or input phone number through the number buttons on the screen, click ← to delete if there is input error.

After input the phone number, click to make a call, and click to hang up the phone. Click during a call so as to switch the voice between car speaker and mobile phone.

4. Call records

Click to access call records interface.

Touch this button to check all the dialed phone numbers. Touch this button to check all the phone numbers of received calls. Touch this button to check all the phone numbers of missed calls.

5. BT music

Touch the icon [ ] or the [ ] in the main interface to enter BT music interface, as is shown below:

]in the main interface to

wn below:

6.Disconnect BT

Disconnect: When there is a need to disconnect the BT device, directly touch the icon [ ] at lower right corner of the BT main interface to disconnect the BT device.