M3P9 - Detector iGET - Free user manual and instructions
Find the device manual for free M3P9 iGET in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | iGET |
| Model | M3P9 |
| Product Type | Smoke Detector |
| Dimensions | 10 cm (diameter) x 4 cm (height) |
| Weight | 150 g (including battery) |
| Power Source | 9V alkaline battery (included) |
| Battery Life | Up to 1 year under normal conditions |
| Sensor Type | Photoelectric |
| Alarm Loudness | 85 dB at 3 meters |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 85% non-condensing |
| Compliance Standards | CE, EN 14604 |
| Test Button | Yes, for functional test |
| Silence Function | Yes, temporarily silences false alarms |
| Low Battery Indicator | Chirping sound every 40 seconds |
| Mounting | Ceiling or wall mount with included bracket |
| Maintenance | Clean with a soft, dry cloth; test weekly; replace battery annually |
| Safety Precautions | Do not paint the detector; keep away from dust and steam |
| Replaceable Parts | Battery only |
| Repairability | Not user-serviceable; replace unit after 10 years |
| General Information | Indoor use only; suitable for living rooms, bedrooms, hallways |
Frequently Asked Questions - M3P9 iGET
How do I install the iGET M3P9 smoke detector?
Mount the bracket to the ceiling or wall using screws. Insert a 9V battery into the detector, twist it onto the bracket, and press the test button to verify operation.
How often should I test the detector?
Test the alarm weekly by pressing and holding the test button until the alarm sounds. This ensures the sensor and battery are working.
What does a chirping sound mean?
A chirp every 40 seconds indicates a low battery. Replace the 9V battery immediately.
How can I silence a false alarm?
Press the silence button to temporarily mute the alarm for about 10 minutes. This is useful for cooking smoke or steam.
What is the battery life and how do I replace it?
The battery lasts up to one year. To replace, twist the detector counterclockwise to remove it from the bracket, open the battery compartment, and insert a new 9V battery.
Where should I place the detector?
Install on the ceiling at least 30 cm (12 inches) from any wall or corner. Avoid bathrooms, kitchens (to prevent false alarms), and garages.
When should I replace the entire detector?
Replace the iGET M3P9 after 10 years from the date of manufacture. The unit has a built-in end-of-life warning.
What should I do when the alarm goes off?
Evacuate the building immediately. Do not stop to pack belongings. Call emergency services from outside. Do not re-enter until cleared.
How do I clean the detector?
Use a soft, dry cloth or a vacuum cleaner with a brush attachment to gently remove dust from the vents. Do not use water or cleaning agents.
Is the M3P9 suitable for kitchens?
It is not recommended for direct installation in kitchens due to cooking fumes causing false alarms. Place it at least 3 meters (10 feet) away from cooking appliances.
User questions about M3P9 iGET
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Detector in PDF format for free! Find your manual M3P9 - iGET and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M3P9 by iGET.
USER MANUAL M3P9 iGET
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : iGET
Model : M3P9
Category : Detector