HPA8350B - Air purifier HONEYWELL - Free user manual and instructions
Find the device manual for free HPA8350B HONEYWELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Purifier |
| Brand | Honeywell |
| Model | HPA8350B |
| Dimensions (L x W x H) | 45.7 x 45.7 x 73.7 cm |
| Weight | 8.2 kg |
| Power Supply | 220-240 V, 50-60 Hz |
| Power Consumption | 60 W (max) |
| Coverage Area | Up to 55 m² |
| Filtration Type | Washable pre-filter + HEPA H13 filter + activated carbon filter |
| CADR (Dust) | 250 m³/h |
| CADR (Pollen) | 220 m³/h |
| CADR (Smoke) | 200 m³/h |
| Number of Speeds | 4 + Turbo mode |
| Noise Level | 30 to 55 dB(A) |
| Timer | 2, 4 or 8 hours |
| Control | Touch panel + remote control |
| Filter Change Indicator | Yes |
| Warranty | 2 years (parts) |
| Remote Control Batteries | 2 x AAA (not included) |
| Spare Parts Available | HEPA filter (HRF-AP1), carbon filter (HRF-AP2) |
| Repairability | Repairability index 7.9/10 |
| Maintenance and Cleaning | Pre-filter washable with water every 2-4 months; filters replaced every 12 months |
| Safety | Automatic shut-off if tipped over, polarized plug |
Frequently Asked Questions - HPA8350B HONEYWELL
How do I change the filter on my Honeywell HPA8350B?
Turn off and unplug the unit. Open the front panel, remove the old filter, insert the new one (model HRF-AP1 for HEPA, HRF-AP2 for carbon). Close the panel and plug it back in. Reset the filter indicator by holding down the 'Filter Reset' button for 5 seconds.
How often should I clean the pre-filter?
It is recommended to clean the pre-filter every 2 to 4 months depending on usage. Use a vacuum or rinse with warm soapy water, dry completely before reinstalling.
Does the Honeywell HPA8350B air purifier produce ozone?
No, this model uses mechanical filtration (HEPA and activated carbon) and emits no harmful ozone. It meets safety standards.
Can I run the purifier continuously?
Yes, it is designed for 24/7 operation. Filters must be replaced regularly (about every 12 months) to maintain efficiency.
What is the noise level at minimum speed?
At minimum speed (standby), the noise level is about 30 dB(A), which is very quiet and suitable for a bedroom.
How do I reset the filter change indicator?
After changing the filter, plug in the unit and hold down the 'Filter Reset' button (located behind the front panel) for 5 seconds until the indicator turns off.
What is the recommended room size for this purifier?
The Honeywell HPA8350B is suitable for rooms up to 55 m² for effective air changes (4 to 5 air changes per hour).
How do I maintain the remote control?
Clean the remote control with a soft dry cloth. Replace the batteries (2 x AAA) when range decreases. Do not expose to moisture.
What is the power consumption in standby?
In standby mode (off but plugged in), consumption is less than 1 W. It is 60 W at maximum operation.
Can I use a power adapter not provided?
No, use only the provided power cord. Any third-party adapter could damage the unit or pose a safety risk.
User questions about HPA8350B HONEYWELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air purifier in PDF format for free! Find your manual HPA8350B - HONEYWELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HPA8350B by HONEYWELL.
USER MANUAL HPA8350B HONEYWELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HONEYWELL
Model : HPA8350B
Category : Air purifier