UC 18YKSL - Battery charger METABO - Free user manual and instructions
Find the device manual for free UC 18YKSL METABO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Battery Charger |
| Brand | Metabo |
| Model | UC 18YKSL |
| Input Voltage | 100-240 V AC, 50-60 Hz |
| Output Voltage | 18 V DC |
| Charging Current | 3 A |
| Compatible Batteries | Metabo 18 V Li-Ion (18V series) |
| Charging Time (2 Ah battery) | Approx. 40 minutes |
| LED Indicators | Red (charging), Green (battery full), Orange (fault) |
| Protection | Overload, short circuit, overheating, deep discharge |
| Operating Temperature | 0 °C to 50 °C |
| Dimensions (W x D x H) | 190 x 105 x 75 mm |
| Weight | 0.6 kg |
| Housing Material | Impact-resistant ABS plastic |
| Cable Length | 1.8 m |
| Wall Mounting | Possible (suspension notches) |
| Cooling | Integrated fan |
| Maintenance and Cleaning | Unplug before cleaning; use a dry cloth; do not immerse |
| Safety Instructions | Do not expose to moisture; use only with Metabo batteries; do not open |
| Spare Parts and Repairability | Contact Metabo customer service; no user-serviceable parts |
| General Information | Smart charger with automatic battery detection |
Frequently Asked Questions - UC 18YKSL METABO
What types of batteries can I charge with the Metabo UC 18YKSL?
This charger is designed for Metabo 18 V Li-Ion batteries from the 18V series. Do not use with other brands or battery types.
How to interpret the charger LEDs?
The red LED indicates the battery is charging. The green LED means the battery is fully charged. A flashing orange LED signals an anomaly (high temperature or defective battery).
How long does it take to charge a 2 Ah battery?
With a charging current of 3 A, a 2 Ah battery is typically charged in about 40 minutes. The time may vary depending on battery condition and capacity.
Can I leave the battery charging overnight?
Yes, the charger has overcharge protection. It automatically stops charging once the battery is full, but it is recommended to remove the battery once charged to preserve its lifespan.
What if the charger does not detect the battery?
Check that the battery is correctly inserted and the contacts are clean. If the problem persists, try with another battery. If no battery is detected, the charger may be defective; contact Metabo customer service.
Does the charger heat up normally?
Yes, a slight temperature rise is normal during charging. The charger is equipped with a fan to dissipate heat. If it becomes very hot or smells burnt, unplug it immediately and consult a professional.
Can I use the charger outdoors?
The charger is designed for indoor use. Do not expose it to rain, moisture, or excessive dust. Use it in a dry, well-ventilated area.
How to clean the charger?
Always unplug the charger before cleaning. Use a dry, soft cloth to wipe the housing. Do not use chemicals or water, and never immerse the charger in water.
Is the charger compatible with Ni-Cd batteries?
No, the Metabo UC 18YKSL is specifically designed for Li-Ion batteries. Using Ni-Cd batteries could damage the charger and battery.
Where can I find spare parts or get my charger repaired?
Contact Metabo after-sales service or an authorized repair center. There are no user-serviceable parts; do not open the charger yourself.
User questions about UC 18YKSL METABO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Battery charger in PDF format for free! Find your manual UC 18YKSL - METABO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UC 18YKSL by METABO.
USER MANUAL UC 18YKSL METABO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : METABO
Model : UC 18YKSL
Category : Battery charger