QT03624KNAX - Generator Generac - Free user manual and instructions
Find the device manual for free QT03624KNAX Generac in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Standby Generator |
| Power Output (Rated) | 36 kW (36,000 Watts) |
| Power Output (Surge) | 45 kW (45,000 Watts) |
| Fuel Type | Natural Gas / Liquid Propane |
| Engine Type | Generac 999cc V-Twin, Air-Cooled |
| Alternator Type | Brushless, Permanent Magnet |
| Voltage | 120/240V Single Phase |
| Rated Frequency | 60 Hz |
| Dimensions (L x W x H) | 48 x 26 x 30 inches |
| Weight | 398 lbs (180 kg) |
| Noise Level | 67 dBA at 23 ft |
| Fuel Consumption (NG) | 307 ft³/hr at full load |
| Fuel Consumption (LP) | 2.78 gal/hr at full load |
| Run Time | Continuous with utility supply |
| Transfer Switch | Compatible with Generac 200A automatic transfer switch |
| Starting System | Electric start with battery |
| Control Panel | Digital display with auto diagnostics |
| Warranty | 5-year limited |
| Emissions Compliance | CARB / EPA compliant |
Frequently Asked Questions - QT03624KNAX Generac
What is the recommended maintenance schedule for the Generac QT03624KNAX?
Perform oil and filter change every 100 hours or annually. Check air filter every 50 hours, and spark plugs every 200 hours. Run a load bank test monthly.
Can this generator run on natural gas only?
Yes, the QT03624KNAX is factory-tuned for natural gas but can also run on liquid propane with a conversion kit. Consult the manual for proper adjustment.
What are the installation requirements?
Must be installed by a licensed electrician. Requires a concrete pad, clearances of 3 ft on sides, 5 ft front, and 18 inches back. A 200A automatic transfer switch is recommended.
How often should I exercise the generator?
Generac recommends running the generator under load for 30 minutes weekly to ensure proper operation and battery charge.
What type of oil should I use?
Use SAE 10W-30 or 5W-30 synthetic oil meeting API SJ or higher. Capacity is 2.0 quarts (1.9 L).
My generator won't start. What should I check?
Check the battery voltage (should be 12.6V+). Verify fuel supply valve is open and oil level is full. Inspect spark plugs for wear. If error code appears, refer to manual.
What is the transfer switch compatibility?
This generator is compatible with Generac 200A automatic transfer switches (e.g., RXSW200A3). Use a load shedding module if total load exceeds generator capacity.
How loud is this generator during operation?
Noise level is 67 dBA at 23 feet, comparable to a central air conditioner. Sound-attenuating enclosure reduces noise.
What is the warranty coverage?
Generac provides a 5-year limited warranty covering defects in materials and workmanship. Excludes normal wear, misuse, and improper installation.
Can I install it myself?
No. Professional installation by a certified Generac dealer is required to ensure safety, compliance with local codes, and warranty validity.
User questions about QT03624KNAX Generac
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Generator in PDF format for free! Find your manual QT03624KNAX - Generac and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. QT03624KNAX by Generac.
USER MANUAL QT03624KNAX Generac
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Generac
Model : QT03624KNAX
Category : Generator