QT07068JNAC - Generator Generac - Free user manual and instructions
Find the device manual for free QT07068JNAC Generac in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Home Standby Generator |
| Model | QT07068JNAC |
| Power Output (Standby) | 70 kW (70,000 W) |
| Power Output (Prime) | 63 kW (63,000 W) |
| Fuel Type | Natural Gas / LP Vapor |
| Engine Type | Generac 3.0L 4-Cylinder Liquid-Cooled |
| Alternator Type | Brushless, 4-Pole, Rotating Field |
| Voltage | 240/120V Single Phase |
| Frequency | 60 Hz |
| Amperage (Main Breaker) | 200 A |
| Transfer Switch | Not included (compatible with Generac transfer switches) |
| Dimensions (L x W x H) | 60 x 38 x 40 in (1524 x 965 x 1016 mm) |
| Weight | 2,500 lb (1,134 kg) |
| Sound Level | 67 dBA at 23 ft (7 m) |
| Fuel Consumption (Natural Gas at 50% load) | 535 ft³/h (15.1 m³/h) |
| Oil Capacity | 6 qt (5.7 L) |
| Coolant Capacity | 3.5 gal (13.2 L) |
| Battery Requirement | 12V, 500 CCA (not included) |
| Warranty | 5-Year Limited |
| Maintenance Interval | Oil and filter change every 100 hours or annually |
Frequently Asked Questions - QT07068JNAC Generac
What is the power output of the Generac QT07068JNAC?
The Generac QT07068JNAC provides 70 kW standby power (70,000 W) on natural gas or LP, with a prime rating of 63 kW.
What fuel types does this generator support?
It operates on natural gas or LP vapor. A conversion kit may be required for LP.
How often should I change the oil?
Change oil and filter every 100 hours of operation or annually, whichever comes first. Use SAE 5W-30 synthetic oil.
What is the warranty coverage?
Generac offers a 5-year limited warranty covering parts and labor for residential standby generators.
Is a transfer switch included?
No, a transfer switch must be purchased separately. Compatible models include Generac RTS or SFE series.
What are the dimensions and weight?
Dimensions: 60 x 38 x 40 in (1524 x 965 x 1016 mm). Weight: 2,500 lb (1,134 kg).
How do I reset the generator after a fault?
Press and hold the OFF button for 5 seconds to clear any alarms, then switch to AUTO. Check the control panel for specific error codes.
What battery is required?
A 12V battery with 500 CCA is needed. It is not included with the generator.
Can this generator be installed outdoors?
Yes, it is designed for outdoor installation on a concrete pad. Maintain at least 5 ft clearance on all sides.
How do I exercise the generator?
Set the controller to exercise mode; it will run weekly for 20 minutes under load. You can also manually start it using the control panel.
User questions about QT07068JNAC Generac
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Generator in PDF format for free! Find your manual QT07068JNAC - Generac and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. QT07068JNAC by Generac.
USER MANUAL QT07068JNAC Generac
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Generac
Model : QT07068JNAC
Category : Generator