KXMA400.2 - Receiver KICKER - Free user manual and instructions
Find the device manual for free KXMA400.2 KICKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 2-Channel Power Amplifier |
| Brand | Kicker |
| Model | KXMA400.2 |
| RMS Output Power | 200 W x 2 (4 ohms), 400 W x 1 (bridged, 4 ohms) |
| Frequency Response | 20 Hz - 20 kHz |
| Dimensions (H x W x D) | 5.4 x 19.1 x 29.8 cm |
| Weight | 2.0 kg |
| Power Supply | 12 V DC (automotive electrical system) |
| Current Draw | 30 A max (recommended fuse) |
| Number of Channels | 2 |
| Circuit Type | Class D |
| Crossover Filter | Variable (high-pass, low-pass, full-range) |
| Bass Boost | Yes, adjustable (0-18 dB at 40 Hz) |
| Inputs | RCA (line level) and speaker (high level) |
| Outputs | Screw terminals (2 channels, bridgeable) |
| Minimum Impedance | 2 ohms stereo, 4 ohms bridged |
| Protections | Thermal, short circuit, overvoltage |
| Additional Features | Protection LED, optional gain remote |
| Maintenance and Cleaning | Wipe with a soft, dry cloth. Do not use abrasive products. |
| Safety | Installation by a professional. Disconnect the battery before servicing. |
| Spare Parts and Repairability | Contact an authorized Kicker center. No user-replaceable parts. |
| General Information | Compact amplifier for car audio system. |
Frequently Asked Questions - KXMA400.2 KICKER
What is the power output of the KXMA400.2 amplifier?
The amplifier delivers 200 W RMS per channel at 4 ohms, and can be bridged to provide 400 W RMS at 4 ohms.
What types of inputs are available?
It has RCA (line level) inputs and speaker (high-level) inputs to accommodate different sources.
How to adjust the crossover filter?
Use the potentiometers on the side of the amplifier. You can select high-pass, low-pass, or full-range mode, and adjust the cutoff frequency.
Can I use this amp with a subwoofer?
Yes, you can bridge it to a 4-ohm subwoofer to get 400 W RMS, or use one channel for a sub and the other for speakers.
What does the red light on the amp mean?
The red light indicates a protection feature has been activated (overheating, short circuit, or overvoltage). Check connections and impedance.
What power wire gauge is recommended?
Use 8 AWG (or larger) power wire for lengths under 6 meters. A 30 A fuse is recommended.
Is the amp compatible with a factory radio?
Yes, thanks to the speaker-level inputs, you can connect it directly to the outputs of a factory radio without an adapter.
How to adjust the gain?
Gradually adjust the gain while music is playing. Avoid clipping. Proper adjustment minimizes distortion.
What are the dimensions of the amplifier?
It measures approximately 5.4 cm high, 19.1 cm wide, and 29.8 cm deep, allowing installation in tight spaces.
Where to find the complete user manual?
The complete manual is available for free download on the notice-facile.com website in PDF format.
User questions about KXMA400.2 KICKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual KXMA400.2 - KICKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KXMA400.2 by KICKER.
USER MANUAL KXMA400.2 KICKER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KICKER
Model : KXMA400.2
Category : Receiver