TeraStation 6400DN - NAS BUFFALO - Free user manual and instructions
Find the device manual for free TeraStation 6400DN BUFFALO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Attached Storage (NAS) |
| Brand | Buffalo |
| Model | TeraStation 6400DN |
| Form Factor | Desktop |
| Number of Drive Bays | 4 (supports 3.5" SATA HDD/SSD) |
| Processor | Marvell ARMADA 385 (1.6 GHz, dual-core) |
| System Memory | 2 GB DDR3 RAM |
| Ethernet Ports | 2 x Gigabit (RJ-45) |
| USB Ports | 2 x USB 3.0 (Type A) |
| Supported RAID Levels | RAID 0, 1, 5, 6, 10 |
| Maximum Raw Capacity | Up to 64 TB (with 4 x 16 TB drives) |
| Dimensions (W x D x H) | 170 mm x 200 mm x 230 mm (6.7 x 7.9 x 9.1 in) |
| Weight | Approximately 4.5 kg (9.9 lbs) |
| Power Supply | AC 100-240 V, 50/60 Hz, internal (90W) |
| Cooling Fan | 1 x 120 mm (rear, replaceable) |
| Key Features | File sharing, backup server, media streaming, FTP, iSCSI, VPN server, cloud sync |
| Maintenance | Clean exterior with a soft, dry cloth; avoid liquid cleaners |
| Safety | Do not open device; keep away from moisture and heat sources |
| Spare Parts & Repairability | User-replaceable: hard drives, fan, power supply unit |
| Warranty | 3 years limited warranty (details in manual) |
Frequently Asked Questions - TeraStation 6400DN BUFFALO
How do I set up the TeraStation 6400DN for the first time?
Connect the NAS to your router via Ethernet, power it on, then use the BUFFALO NAS Navigator software to find the device. Open a web browser and enter the IP address to access the initial setup wizard.
What RAID configurations are supported?
The TeraStation 6400DN supports RAID 0, 1, 5, 6, and 10. You can choose the mode during initial setup or change it later via the settings menu (note that changing RAID erases all data).
Can I replace a failed hard drive without losing data?
Yes, if your NAS is configured with a redundant RAID (e.g., RAID 1, 5, 6, or 10). Simply remove the failed drive and insert a new one of equal or larger capacity. The system will rebuild the array automatically.
How do I access files from a Windows or Mac computer?
Use file sharing protocols: for Windows, map a network drive using SMB/CIFS. For Mac, use AFP or SMB. You can also access via FTP or the web-based file manager.
Does the TeraStation 6400DN support remote access?
Yes, you can enable WebAccess or a VPN server for secure remote access. Alternatively, use built-in cloud sync services to sync folders with cloud storage.
Can I expand storage capacity later?
Yes, you can replace existing drives with larger ones or add external USB drives. For internal expansion, migrate to larger drives one by one if using a redundant RAID.
How do I back up my PC to the TeraStation?
Install BUFFALO Backup Utility on your PC and schedule backups to a shared folder on the NAS. Alternatively, use built-in Time Machine support for Mac.
What is the default administrator username and password?
The default login is admin for both username and password. You are strongly advised to change this during initial setup.
How do I reset the NAS to factory defaults?
Press and hold the Reset button on the front panel for at least 10 seconds using a paperclip. This will reset all settings and restore the device to factory state (excluding data).
What should I do if the NAS becomes unresponsive?
First, try a soft reboot via the web interface. If inaccessible, press the Power button briefly to shut down gracefully. As a last resort, unplug the power cord for 30 seconds and reconnect.
User questions about TeraStation 6400DN BUFFALO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your NAS in PDF format for free! Find your manual TeraStation 6400DN - BUFFALO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TeraStation 6400DN by BUFFALO.