BUFFALO

LinkStation 441 - NAS BUFFALO - Free user manual and instructions

Find the device manual for free LinkStation 441 BUFFALO in PDF.

📄 105 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice BUFFALO LinkStation 441 - page 7
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Network Attached Storage (NAS)
Number of Bays 4
Supported Drives 3.5" SATA HDD/SSD
Maximum Raw Capacity Up to 80 TB (with 20 TB drives)
Processor ARM Cortex-A15, 1.4 GHz dual-core
Memory 2 GB DDR3 RAM
Network Interface 1x Gigabit Ethernet (RJ-45)
USB Ports 2x USB 3.0, 1x USB 2.0
RAID Support RAID 0, 1, 5, 6, 10, JBOD
File System EXT4, FAT32, NTFS, HFS+
Dimensions (W x D x H) 170 x 230 x 250 mm
Weight Approx. 4.5 kg (without drives)
Power Consumption 60 W (typical) / 80 W (max)
Power Supply External AC adapter, 100-240V, 50/60 Hz
Cooling Fan 1x 92 mm silent fan
Operating Temperature 5°C to 35°C
Supported Protocols SMB/CIFS, AFP, NFS, FTP, WebDAV
Access Control User/group permissions, Active Directory support
Backup Features Time Machine, rsync, USB copy, cloud backup
Media Server DLNA/UPnP, iTunes server
Maintenance Clean external surface with dry cloth; avoid liquids
Safety Precautions Place on stable surface; ensure adequate ventilation; avoid direct sunlight
Spare Parts & Repairability User-replaceable HDDs, fan, and power adapter; see manual for instructions
Warranty 2 years limited

Frequently Asked Questions - LinkStation 441 BUFFALO

How do I set up the LinkStation 441 for the first time?
Connect the NAS to your router using an Ethernet cable, plug in the power adapter, and turn it on. Install the NAS Navigator2 software on your computer to discover the device and follow the setup wizard.
What RAID modes are supported and how do I choose one?
The LinkStation 441 supports RAID 0, 1, 5, 6, 10, and JBOD. During initial setup via the web interface, you can select a RAID mode based on your need for performance (RAID 0) or redundancy (RAID 5/6). Note that changing RAID mode erases all data.
Can I access my files remotely?
Yes, once configured for remote access, you can access files via the web interface or mobile apps. Use the LinkStation dashboard to enable remote access features like WebAccess or VPN.
How do I replace a failed hard drive?
If a drive fails, the LED on the front panel will indicate the fault. Remove the bad drive from its bay, insert a new compatible SATA drive, and rebuild the RAID array via the management interface. The NAS will automatically begin rebuilding if RAID redundancy is configured.
Is it compatible with Time Machine?
Yes, the LinkStation 441 supports Apple Time Machine. Enable Time Machine support in the NAS settings and select the shared folder as the backup destination on your Mac.
How do I reset the administrator password?
Press and hold the Function button on the back of the unit for 5 seconds until the power LED blinks. This resets the admin password to default (blank). Access the web interface to set a new password.
What is the maximum capacity supported?
The LinkStation 441 can support hard drives up to 20 TB each, for a maximum raw capacity of 80 TB. Actual usable capacity depends on RAID configuration.
Can I connect external USB drives?
Yes, the NAS has two USB 3.0 ports and one USB 2.0 port. You can connect external storage for direct backup or sharing. Format supported: FAT32, NTFS, EXT4, HFS+.
How do I enable DLNA media streaming?
In the NAS settings, navigate to Media Server and enable DLNA. Specify which shared folders contain media files. Devices like smart TVs and game consoles will then discover the NAS as a media server.
Where can I find the latest firmware and updates?
Firmware updates are available via the web interface under System Settings > Firmware Update. You can also download the latest firmware from the official Buffalo support website.

User questions about LinkStation 441 BUFFALO

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your NAS in PDF format for free! Find your manual LinkStation 441 - BUFFALO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LinkStation 441 by BUFFALO.

USER MANUAL LinkStation 441 BUFFALO

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : BUFFALO

Model : LinkStation 441

Category : NAS