TWC081GGAA2 - Air Conditioning LG - Free user manual and instructions
Find the device manual for free TWC081GGAA2 LG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Window Air Conditioner |
| Brand | LG |
| Model | TWC081GGAA2 |
| Cooling Capacity (BTU) | 8000 |
| Energy Efficiency Ratio (EER) | 12.1 |
| Power Supply (V/Hz) | 115 V / 60 Hz |
| Current (Amps) | 7.5 |
| Dimensions (W x H x D) - Unit | 18.5 x 13.5 x 14.2 in |
| Weight (Unit) | 55 lbs |
| Air Flow (CFM) | 220 |
| Noise Level (dB) | 52 (High) / 45 (Low) |
| Refrigerant Type | R-410A |
| Control Type | Remote Control and Manual Buttons |
| Timer Function | 24-Hour On/Off Timer |
| Sleep Mode | Yes |
| Filter Type | Washable Mesh Filter |
| Filter Cleaning | Every 2 weeks |
| Drain Method | Self-Evaporation (No Drain Required) |
| Installation Type | Window Mount (Vertical/Horizontal) |
| Warranty | 1 Year Parts and Labor |
| Certifications | ENERGY STAR, UL Listed |
| Special Features | Auto Cool, Dry Mode, Fan Only |
| Air Direction | 4-Way Air Deflector |
Frequently Asked Questions - TWC081GGAA2 LG
How do I properly install the LG TWC081GGAA2 window air conditioner?
Installation requires a double-hung or sliding window. Ensure the window opening is at least 18.5 inches wide. Follow the included manual to attach the side panels and secure the unit. Use the mounting brackets if provided, and seal gaps with foam insulation.
How often should I clean the filter?
The washable mesh filter should be cleaned every two weeks under normal use. Slide the filter out from the front grille, wash it with mild soap and water, dry completely, and reinsert.
The remote control is not working. What should I do?
First, replace the batteries (2 AAA, not included). Make sure there are no obstructions between the remote and the unit. Clean the remote's infrared emitter and the unit's receiver. If still not working, use the onboard control panel as a temporary solution.
What does the Sleep mode do?
Sleep mode gradually increases the temperature by 2°F over the first few hours for more comfortable sleep. It also reduces fan noise. The temperature will hold at the higher setting until the timer turns off.
How do I set the timer?
Press the Timer button on the remote or unit. Use the +/- buttons to set the desired number of hours (1-24). The unit will turn on or off after the set time. Confirm by pressing Timer again.
The unit is making a loud noise. Is that normal?
Some noise is normal, including compressor and fan sounds. If you hear rattling, check that the unit is level and securely mounted. Vibrations can be reduced by adding foam pads between the unit and window sill.
Does this unit require a dedicated outlet?
It is recommended to plug the unit into a dedicated 115V, 15-amp circuit to avoid overloading. Do not use an extension cord or power strip.
How do I switch between Cool and Fan modes?
Press the Mode button repeatedly to cycle through Cool, Dry, and Fan modes. The indicator light will show the current mode. In Fan mode, only room air circulates without cooling.
What is the energy consumption of this unit?
The LG TWC081GGAA2 has an EER of 12.1 and uses approximately 660 Watts per hour on high cool. It is ENERGY STAR certified, making it efficient for its size.
How do I drain water from the unit?
This unit features self-evaporation technology, which evaporates most condensation. In high humidity, you may hear a gurgling sound. If water accumulates, remove the drain plug on the back and allow water to flow into a pan.
User questions about TWC081GGAA2 LG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual TWC081GGAA2 - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TWC081GGAA2 by LG.