HH2000L - Heating GORENJE - Free user manual and instructions
Find the device manual for free HH2000L GORENJE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fan Heater |
| Model | HH2000L |
| Brand | Gorenje |
| Power Output | 2000 W (2 heating levels: 1000/2000 W) |
| Voltage | 220-240 V, 50/60 Hz |
| Heating Element | PTC ceramic |
| Dimensions (H x W x D) | 250 x 180 x 130 mm |
| Weight | 1.8 kg |
| Fan Speeds | 2 (low/high) |
| Thermostat | Adjustable, with frost protection mode |
| Safety Features | Overheat protection, tip-over switch, cool-touch housing |
| Oscillation | Yes, 70° wide angle |
| Noise Level | ≤ 45 dB (low speed) |
| Room Size Recommendation | Up to 25 m² |
| Energy Efficiency Class | Class A (local space heater) |
| Power Cord Length | 1.8 m |
| Filter | Washable dust filter |
| Timer | 24-hour programmable timer |
| Remote Control | Included |
| Certifications | CE, GS, RoHS |
| Color | White |
| Application | Indoor use only |
Frequently Asked Questions - HH2000L GORENJE
How do I clean the dust filter on my Gorenje HH2000L heater?
Unplug the heater and remove the filter cover (usually at the back). Slide out the filter and wash it with lukewarm water and mild detergent. Let it dry completely before reinserting. Clean every 2 weeks for optimal performance.
What should I do if the heater tips over?
The tip-over switch will automatically turn off the heater. Simply place it upright on a flat, stable surface and restart it. Ensure the switch is not obstructed.
Can I use the Gorenje HH2000L in a bathroom?
The heater is rated IPX1 (splash-proof) and can be used in bathroom zone 2 or 3, but must be installed at least 60 cm from water sources. Avoid direct water spray.
How do I set the timer?
Press the Timer button on the remote or control panel. Use +/- to set hours from 1 to 24. The heater will turn off automatically after the set time. The timer works even in standby mode.
Why does the heater shut off after a few minutes?
This may be due to overheating. Check if the air intake or outlet is blocked. Clean the filter and ensure at least 50 cm clearance around the heater. If problem persists, contact support.
What is the difference between the two power levels?
The heater has 1000 W (low) and 2000 W (high) settings. Low is suitable for maintaining temperature, high for rapid heating. Use the thermostat to regulate.
How do I enable frost protection mode?
Press the Frost Protection button on the remote. The heater will maintain a minimum temperature of 5°C to prevent pipes from freezing in unheated rooms.
Can I paint the heater?
No, painting may damage the housing and affect heat dissipation. The cool-touch material is designed for safety. Use only as supplied.
What is the replacement part number for the remote control?
The remote control part number is RC-HH2000L. You can order it from Gorenje service centers or authorized dealers.
How do I reset the heater after a safety shutdown?
Unplug the heater, wait 10 minutes for the internal thermostat to cool, then plug it back in. Turn on and check operation. If it still shuts off, inspect for blockages.
User questions about HH2000L GORENJE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual HH2000L - GORENJE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HH2000L by GORENJE.
USER MANUAL HH2000L GORENJE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GORENJE
Model : HH2000L
Category : Heating