CG 24EASP (S) - Grass Trimmer HITACHI - Free user manual and instructions
Find the device manual for free CG 24EASP (S) HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Grass Trimmer |
| Brand | Hitachi |
| Model | CG 24EASP (S) |
| Engine Displacement | 24 cc |
| Engine Type | Two-stroke, air-cooled |
| Fuel Mix | Unleaded gasoline: 2-stroke oil (50:1) |
| Cutting Width | 18 inches (457 mm) |
| Cutting Line Diameter | 0.095 inches (2.4 mm) |
| Shaft Type | Straight shaft |
| Weight (without fuel and attachments) | 11.5 lbs (5.2 kg) |
| Fuel Tank Capacity | 16.9 fl oz (500 ml) |
| Starting System | Primer bulb and recoil start |
| Handle | Adjustable D-loop handle |
| Cutting Head | Tap 'n Go bump head |
| Safety Features | Throttle lockout, shoulder strap included |
| Maintenance | Clean air filter regularly; check spark plug annually |
| Replaceable Parts | Cutting line, air filter, spark plug, fuel filter |
| Included Accessories | Shoulder strap, fuel mixing bottle, 2-piece shaft assembly |
Frequently Asked Questions - CG 24EASP (S) HITACHI
What type of fuel does the Hitachi CG 24EASP (S) grass trimmer use?
The trimmer uses a 50:1 mixture of unleaded gasoline and two-stroke engine oil. Never use pure gasoline.
How do I start the CG 24EASP (S) trimmer?
1. Press the primer bulb 5-6 times. 2. Set the choke lever to the closed position. 3. Pull the starter cord until the engine sputters. 4. Open the choke and pull the cord again to start.
How do I replace the cutting line?
Turn the cutting head to align the arrow with the tap, push the spool, and remove it. Remove old line, wind new 0.095 inch line evenly, and reinstall the spool.
What is the recommended cutting width?
The cutting width is 18 inches (457 mm). Use only genuine Hitachi replacement line for best results.
How should I store the trimmer?
Drain the fuel tank completely, run the engine until it stops, and store in a dry, clean place. Remove the spark plug and add a teaspoon of oil into the cylinder.
What maintenance is required after each use?
Clean the air filter, inspect the cutting head for debris, and check for loose screws. Also wipe down the engine and shaft.
Can I use the trimmer with a blade?
The CG 24EASP (S) is designed for line trimming only. Do not attach metal blades as it may damage the unit and cause injury.
Why is the engine hard to start after storage?
Old fuel can clog the carburetor. Drain old fuel, replace with fresh 50:1 mix, and clean the carburetor or take to a service center.
How tight should the cutting line be?
The line should feed out automatically when tapped on the ground. If it does not, the line may be too tight or tangled. Loosen the spool slightly.
What safety gear should I wear?
Always wear safety glasses, long pants, sturdy boots, and hearing protection. Use the shoulder strap for better control.
User questions about CG 24EASP (S) HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Grass Trimmer in PDF format for free! Find your manual CG 24EASP (S) - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CG 24EASP (S) by HITACHI.
USER MANUAL CG 24EASP (S) HITACHI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HITACHI
Model : CG 24EASP (S)
Category : Grass Trimmer