VR122HW - Air conditioner LG - Free user manual and instructions
Find the device manual for free VR122HW LG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Conditioner |
| Brand | LG |
| Model | VR122HW |
| Cooling Capacity | 12000 BTU |
| Energy Efficiency Ratio (EER) | 12.0 |
| Dimensions (W x H x D) | 600 x 400 x 700 mm |
| Net Weight | 35 kg |
| Power Supply | 230V / 60Hz |
| Refrigerant Type | R32 |
| Thermostat Control | Electronic |
| Fan Speeds | 3 |
| Remote Control | Included |
| Timer | 24-hour on/off |
| Sleep Mode | Yes |
| Auto Restart | Yes |
| Filter Type | Washable |
| Noise Level (Indoor) | 55 dB |
| Installation Type | Window |
| Operating Temperature Range | 16°C - 32°C |
| Safety Features | Overheat protection, Child lock |
Frequently Asked Questions - VR122HW LG
How to clean the filter?
Turn off the unit and unplug it. Open the front panel, remove the filter, and wash it with mild detergent and water. Let it dry completely before reinstalling. Clean every 2 weeks for optimal performance.
How to install the air conditioner?
Place the unit in a window or through-wall opening. Secure it with brackets. Ensure the window is sealed. Plug into a grounded outlet. Refer to the manual for detailed steps.
Why is the unit not cooling?
Check if the filter is dirty, the thermostat is set correctly, and the room is not too large. Also ensure the unit is level and the exhaust is not blocked. If problem persists, contact support.
How to use the remote control?
Insert AA batteries (2) into the remote. Point at the unit and press power. Use mode button to switch between cool/fan/dry. Adjust temperature with +/- buttons.
Can I use it in a room with no window?
This unit is designed for window installation. For windowless rooms, consider a portable air conditioner with a venting kit. Not recommended for enclosed spaces without exhaust.
How to set the timer?
Press the Timer button on the remote or control panel. Use +/- to set hours (0-24). Press Timer again to confirm. The unit will turn on/off after the set time.
What does the error code E1 mean?
Error code E1 indicates a room temperature sensor failure. Unplug the unit for 5 minutes and restart. If it persists, contact LG service for repair.
How to reset the unit?
Unplug the unit from the power outlet. Wait 5 minutes. Plug it back in and turn it on. This resets the internal electronics.
What is the recommended room size?
The VR122HW is suitable for rooms up to 500 sq ft (46 m²) under standard conditions. Actual performance depends on insulation, windows, and heat load.
How to drain water from the unit?
In humid conditions, water may collect. Locate the drain plug at the back or bottom of the unit. Place a container under it and remove the plug. For continuous drainage, attach a hose to the drain port.
User questions about VR122HW LG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual VR122HW - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VR122HW by LG.
USER MANUAL VR122HW LG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LG
Model : VR122HW
Category : Air conditioner