DRD-101 - NAS Xcellon - Free user manual and instructions
Find the device manual for free DRD-101 Xcellon in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Attached Storage (NAS) |
| Brand | Xcellon |
| Model | DRD-101 |
| Drive Bays | 1 x 3.5" SATA (compatible with 2.5") |
| Processor | Realtek RTD1296 4-core 1.4 GHz |
| Memory | 1 GB DDR4 RAM |
| Network Interface | 1 x Gigabit Ethernet (RJ-45) |
| USB Ports | 2 x USB 3.0 Type-A |
| Power Supply | 12V DC, 3A external power adapter |
| Dimensions (W x H x D) | 150 x 100 x 200 mm (5.9 x 3.9 x 7.9 in) |
| Weight | 0.8 kg (1.76 lbs) |
| Supported RAID | Single disk (JBOD) |
| File Systems | ext4, Btrfs, NTFS, FAT32, HFS+ |
| Operating System | Embedded Linux (proprietary) |
| Management Interface | Web-based UI (HTTP/HTTPS) |
| Data Protection | Scheduled snapshot, rsync backup |
| Media Server | DLNA, iTunes Server |
| Supported Protocols | SMB/CIFS, AFP, NFS, FTP, WebDAV |
| Cooling Fan | 1 x 60mm, low noise |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Energy Consumption | 15W typical, 8W standby |
| Package Contents | DRD-101 unit, power adapter, Ethernet cable, screw kit, quick installation guide |
Frequently Asked Questions - DRD-101 Xcellon
What is the Xcellon DRD-101 NAS?
The Xcellon DRD-101 is a single-bay Network Attached Storage device designed for home and small office use, providing centralized file storage, backup, and media streaming.
How do I set up the DRD-101 for the first time?
Connect the device to your router via Ethernet, power it on, then use the web interface at the device's IP address to initialize. Insert a hard drive and follow the on-screen wizard.
What hard drives are compatible with the DRD-101?
It supports 3.5-inch SATA III hard drives (also compatible with 2.5-inch SSDs). Maximum capacity is up to 16 TB per drive.
Can I access files remotely without a static IP?
Yes, the DRD-101 supports DDNS (Dynamic DNS) to allow remote access via a hostname. Configure it in the network settings of the web interface.
What RAID does the DRD-101 support?
Since it is a single-bay unit, it only supports JBOD (Just a Bunch Of Disks) or standalone volume. No RAID 0/1 etc.
How can I back up files from my computer to the NAS?
Use the built-in backup app on the NAS web interface, or configure a scheduled rsync task. You can also map the NAS as a network drive and copy files manually.
Can I use the DRD-101 as a media server?
Yes, it supports DLNA and iTunes Server. Enable these services in the multimedia settings to stream photos, music, and videos to compatible devices.
What is the default username and password?
The default login is typically admin with no password, or password 'admin'. It is recommended to change this immediately after setup.
How do I update the firmware on the DRD-101?
Go to the control panel in the web interface, find the firmware update section. Download the latest firmware from the Xcellon support site and upload the file.
What should I do if I forget my admin password?
Press and hold the reset button on the back for 10 seconds to reset the device to factory defaults. This will erase all settings and data on the device.
User questions about DRD-101 Xcellon
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your NAS in PDF format for free! Find your manual DRD-101 - Xcellon and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DRD-101 by Xcellon.
USER MANUAL DRD-101 Xcellon
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Xcellon
Model : DRD-101
Category : NAS