JAMO

Contractor Series 6.5CS - Loudspeaker JAMO - Free user manual and instructions

Find the device manual for free Contractor Series 6.5CS JAMO in PDF.

📄 8 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice JAMO Contractor Series 6.5CS - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type In-wall/on-wall loudspeaker
Brand Jamo
Model Contractor Series 6.5CS
Series Contractor
Speaker Type 2-way
Woofer Size 6.5 inches
Tweeter Type 1-inch soft dome, pivoting
Impedance 8 ohms
Sensitivity 88 dB (1W/1m)
Frequency Response 60 Hz – 20 kHz
Power Handling (RMS) 60 W
Power Handling (Peak) 120 W
Recommended Amplifier Power 20 – 120 W RMS
Cutout Dimensions 7.5 x 10.5 inches (191 x 267 mm)
Mounting Depth 3.5 inches (89 mm)
Overall Dimensions (HxWxD) 8.5 x 11.8 x 4.3 inches (216 x 300 x 109 mm)
Weight 5.5 lbs (2.5 kg)
Finish White (paintable)
Grille Perforated steel, paintable
Mounting System Quick-mount doglegs
Installation In-wall or on-wall (bracket included)
Application Indoor home theater or distributed audio
Crossover Frequency 2.5 kHz
Enclosure Type Sealed (infinite baffle)
Warranty Limited lifetime (check manufacturer)

Frequently Asked Questions - Contractor Series 6.5CS JAMO

What is the impedance of the Jamo Contractor Series 6.5CS?
The impedance is 8 ohms, which is standard for most home amplifiers.
What is the power handling capacity?
It handles 60 watts RMS continuously and 120 watts peak. Recommended amplifier power is 20-120 watts RMS.
Can I use this speaker outdoors?
No, the Contractor Series 6.5CS is designed for indoor use only. It is not weather-resistant.
What are the cutout dimensions for installation?
The required cutout size is 7.5 x 10.5 inches (191 x 267 mm) with a mounting depth of 3.5 inches (89 mm).
How do I install the speaker?
Cut the hole to the specified dimensions, connect the speaker wires to the terminals, insert the speaker, and tighten the dogleg mounting screws to secure it against the wall.
Does it come with a grille?
Yes, it includes a paintaable perforated steel grille that attaches magnetically or with pins.
What is the frequency response?
The frequency response is 60 Hz to 20 kHz, suitable for full-range audio.
Is this speaker compatible with 70V distributed audio systems?
This model is a standard 8-ohm speaker and does not include a built-in transformer for 70V systems. Use a separate 70V step-down transformer if needed.
Can I paint the grille and frame?
Yes, both the frame and grille are paintable. Remove the grille, spray evenly with paint, and reattach after drying.
Where can I find the user manual?
The manual is available for free download at notice-facile.com. Search for 'Jamo Contractor Series 6.5CS'.

User questions about Contractor Series 6.5CS JAMO

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Loudspeaker in PDF format for free! Find your manual Contractor Series 6.5CS - JAMO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Contractor Series 6.5CS by JAMO.

USER MANUAL Contractor Series 6.5CS JAMO

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : JAMO

Model : Contractor Series 6.5CS

Category : Loudspeaker