C 10LA - Saw HITACHI - Free user manual and instructions
Find the device manual for free C 10LA HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Sliding compound miter saw |
| Brand | Hitachi |
| Model | C 10LA |
| Blade diameter | 254 mm (10 inches) |
| Motor power | 15 A (1670 W) |
| No-load speed | 4000 rpm |
| Cutting capacity (90°) | 89 mm x 318 mm |
| Cutting capacity (45° miter) | 89 mm x 223 mm |
| Miter range | 0° to 45° (left/right) |
| Bevel range | 0° to 48° (left) |
| Dimensions (L x W x H) | 770 x 540 x 610 mm |
| Weight | 25.4 kg |
| Power supply | 110-120 V / 220-240 V (depending on version), 50/60 Hz |
| Slide type | Telescoping slide |
| Main functions | Miter cuts, bevel cuts, compound cuts, rip cuts |
| Maintenance and cleaning | Regularly clean the blade and slides, lubricate moving parts |
| Safety | Electric brake, trigger switch, retractable blade guard |
| Spare parts and repairability | Blade, dust bag, guide, spare parts available |
| General information | Made in Japan, user manual included, manufacturer warranty |
Frequently Asked Questions - C 10LA HITACHI
What type of blade to use with the Hitachi C 10LA?
Use a 254 mm (10 inch) blade with a 15.88 mm (5/8 inch) arbor. Prefer a carbide-tipped blade for a clean cut.
How to change the saw blade?
Unplug the saw. Press the arbor lock, loosen the center screw with the provided wrench, replace the blade and tighten. Ensure the rotation arrows match.
Does the saw have a laser guide?
The C 10LA model is not equipped with an integrated laser. You can use a cutting guide or an optional laser accessory.
How to adjust the miter and bevel?
For miter, loosen the locking lever, pivot the table to the desired angle, then tighten. For bevel, loosen the rear knob, tilt the head, then tighten.
What is the maximum cutting capacity?
At 90°, the maximum cut is 89 mm height and 318 mm width. At 45° miter, the width becomes 223 mm.
How to maintain the slide rails?
Clean the rails with a dry cloth to remove sawdust. Apply a light lubricant like WD-40 or silicone, then slide back and forth several times.
The electric brake no longer works, what to do?
Check the carbon brushes. If they are worn, replace them. If the problem persists, contact a Hitachi authorized service.
Can I use this saw to cut metal?
No, this saw is designed for wood and derived materials. To cut metal, use a specific blade with cooling, but this is not recommended without evaluation.
How to improve cutting accuracy?
Check the squareness of the blade to the table and fence. Use a setting block and adjust the stops. Regular maintenance ensures accuracy.
Where to find spare parts?
Contact an authorized Hitachi dealer or check the official online store. Use the model number C 10LA for references.
User questions about C 10LA HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual C 10LA - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. C 10LA by HITACHI.
USER MANUAL C 10LA HITACHI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HITACHI
Model : C 10LA
Category : Saw