3981 - Iron SUNBEAM - Free user manual and instructions
Find the device manual for free 3981 SUNBEAM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Steam Iron |
| Dimensions (L x W x H) | 31.0 x 16.0 x 15.0 cm |
| Weight | 1.5 kg |
| Power supply | 120 V, 60 Hz |
| Power consumption | 1500 W |
| Soleplate material | Non-stick ceramic |
| Water tank capacity | 300 ml |
| Steam output (continuous) | 30 g/min |
| Steam shot | Yes, 100 g/min |
| Spray function | Yes |
| Vertical steaming | Yes |
| Anti-drip system | Yes |
| Auto shut-off | Yes, after 8 minutes of inactivity |
| Self-cleaning function | Yes |
| Cord length | 2.4 m |
| Care and cleaning | Unplug and allow cool. Wipe soleplate with damp cloth. Use self-cleaning function monthly. |
| Safety | Automatic shut-off prevents overheating; do not immerse in water. |
| Spare parts and repairability | Replacement water tank and soleplate available; contact Sunbeam customer service. |
| General information | Brand: Sunbeam, Model: 3981; suitable for most fabrics; use distilled water for best performance. |
Frequently Asked Questions - 3981 SUNBEAM
How do I fill the water tank?
Unplug the iron, open the water inlet cover, and fill with water using the measuring cup provided. Do not exceed the MAX line.
What type of water should I use?
For best results, use distilled or demineralized water to prevent mineral buildup. Tap water may be used but requires regular self-cleaning.
How do I activate the self-cleaning function?
Fill the tank halfway, heat the iron to max, unplug, hold over a sink, and press the self-cleaning button. Steam and debris will flush out.
Why is my iron not producing steam?
Ensure the water tank is filled and the temperature dial is set to the steam range (above •••). Wait for the iron to heat up. If still no steam, perform the self-cleaning cycle.
Can I use the iron for vertical steaming?
Yes, hang the garment and press the steam shot button while holding the iron vertically. Keep the iron at least 15 cm from the fabric.
How do I clean the soleplate?
Unplug and let cool. Wipe with a damp cloth and mild detergent. Avoid abrasive cleaners. For sticky residue, use a soleplate cleaner.
What does the auto shut-off feature do?
The iron automatically turns off after being motionless for 8 minutes on its soleplate, or 30 seconds on its side. It re-heats when lifted.
How do I adjust the temperature?
Rotate the temperature dial to match the fabric: low for synthetics, medium for wool, high for cotton/linen. Refer to the fabric guide on the iron.
Is it safe to leave the iron unattended?
No. Even with auto shut-off, never leave the iron plugged in and unattended. Always unplug after use.
Where can I find replacement parts?
Contact Sunbeam customer service or visit the official website. Common spare parts include water tank caps and soleplate repair kits.
User questions about 3981 SUNBEAM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Iron in PDF format for free! Find your manual 3981 - SUNBEAM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 3981 by SUNBEAM.
USER MANUAL 3981 SUNBEAM
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SUNBEAM
Model : 3981
Category : Iron