PSU-300TCM - Receiver ALPINE - Free user manual and instructions
Find the device manual for free PSU-300TCM ALPINE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Stereo Receiver |
| Brand | Alpine |
| Model | PSU-300TCM |
| Dimensions (W x H x D) | 430 x 140 x 360 mm |
| Weight | 8.5 kg |
| Power supply | AC 230V, 50/60 Hz |
| Power consumption | 280 W (max) |
| Output power (per channel) | 100 W RMS at 8 ohms |
| Frequency response | 20 Hz - 20 kHz (±1 dB) |
| Signal-to-noise ratio | 98 dB |
| Total harmonic distortion | 0.05% (at rated power) |
| Inputs | 4x RCA stereo, 1x Phono (MM), 1x Optical, 1x Coaxial |
| Outputs | Speaker terminals, 1x Pre-out subwoofer, 1x Headphone (6.3mm) |
| Supported radio bands | FM, AM |
| Cleaning instructions | Wipe with dry soft cloth. Do not use solvents. |
| Safety features | Overload protection, short circuit protection, thermal cutoff |
| Spare parts / repairability | Contact Alpine authorized service center for spare parts and repairs. |
Frequently Asked Questions - PSU-300TCM ALPINE
How do I connect my speakers to the PSU-300TCM?
Use speaker cables with banana plugs or bare wire. Connect to the labeled speaker terminals on the back panel. Ensure correct polarity (+ to +, - to -).
What is the maximum power output per channel?
The PSU-300TCM delivers 100 watts RMS per channel at 8 ohms, and up to 150 watts at 4 ohms (dynamic power).
Can I connect a turntable directly?
Yes, the receiver has a dedicated Phono input for moving magnet (MM) cartridges. No external preamp needed.
How do I set up the FM/AM tuner?
Connect the supplied antenna. Press the TUNER button, then use the TUNING knob or buttons to search for stations. Preset your favorites by pressing MEMORY and then a number.
My receiver turns off after a few minutes. What should I do?
This is likely the thermal protection activating. Ensure proper ventilation, reduce volume, or check speaker impedance (minimum 4 ohms). Let it cool down before restarting.
How do I clean the receiver?
Unplug the unit. Use a soft, dry cloth to wipe the exterior. Do not use any liquids, sprays, or abrasive cleaners. Clean the ventilation grilles gently with a vacuum.
Can I use the PSU-300TCM with 4-ohm speakers?
Yes, it is rated for 4-ohm speakers. For optimal performance, ensure the impedance selector switch (if present) is set to 4 ohms. Avoid running multiple pairs at once.
How do I connect a subwoofer?
Use the Pre-out subwoofer output on the back panel. Connect it to your powered subwoofer's line input. The subwoofer level can be adjusted from the front panel.
What should I do if there is no sound?
Check that the correct input is selected, speaker connections are secure, and the volume is turned up. Also ensure the mute function is not active (press MUTE). Try headphones to verify amplifier output.
Where can I find a repair service?
Contact Alpine's customer support or visit their website to locate an authorized service center. Do not attempt internal repairs yourself.
User questions about PSU-300TCM ALPINE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual PSU-300TCM - ALPINE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PSU-300TCM by ALPINE.
USER MANUAL PSU-300TCM ALPINE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ALPINE
Model : PSU-300TCM
Category : Receiver