PXE-0850S - Receiver ALPINE - Free user manual and instructions
Find the device manual for free PXE-0850S ALPINE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DSP Amplifier |
| Brand | Alpine |
| Model | PXE-0850S |
| Power Output (RMS) | 50W x 8 @ 4 ohms |
| Total Power (RMS) | 400W |
| Channels | 8 |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | >95 dB |
| Damping Factor | >100 |
| Input Sensitivity | 0.2V - 8V |
| Dimensions (W x H x D) | 295 x 50 x 220 mm |
| Weight | 2.5 kg |
| Power Supply Voltage | 12V DC (10.5 - 14.4V) |
| DSP Processor | 32-bit |
| Bluetooth | Yes, with aptX |
| Remote Control | Included wired remote |
| Crossover | Selectable HPF/LPF/BPF |
| Equalizer | 31-band graphic EQ |
| Inputs | 8 x RCA, 1 x Optical TOSLINK, 1 x USB |
| Outputs | 8 x Speaker, 4 x RCA (pre-out) |
| Protection | Thermal, over-current, DC offset |
| Maintenance | Clean with dry cloth, avoid liquids |
| Safety | Install by qualified personnel |
| Spare Parts Availability | Contact Alpine authorized dealer |
Frequently Asked Questions - PXE-0850S ALPINE
What is the power output of the Alpine PXE-0850S?
The PXE-0850S delivers 50 watts RMS per channel into 4 ohms, with a total of 8 channels.
Can I use Bluetooth to stream music to the PXE-0850S?
Yes, the unit supports Bluetooth with aptX codec for high-quality wireless audio streaming.
What type of DSP does the PXE-0850S have?
It features a 32-bit digital signal processor allowing precise tuning of crossover, equalizer, and time alignment.
How do I install the PXE-0850S in my car?
We recommend professional installation. Connect power to a 12V DC source, ground securely, and connect speaker wires to the correct channels. Use the included remote control.
Does the PXE-0850S come with a warranty?
Yes, Alpine typically offers a 1-year limited warranty from the date of purchase. Check your local dealer for details.
What is the difference between the PXE-0850S and other Alpine DSP amplifiers?
The PXE-0850S is an 8-channel amplifier with integrated DSP, offering 50W per channel. It includes Bluetooth and optical input for versatile connectivity.
Can I adjust the equalizer settings?
Yes, you can adjust the 31-band graphic equalizer via the remote or using Alpine's tuning software on a PC.
What safety precautions should I follow?
Disconnect the battery before installation. Ensure the unit is fused and mounted securely to prevent short circuits. Do not expose to moisture.
How do I clean the PXE-0850S?
Use a soft dry cloth to wipe the exterior. Do not use solvents or abrasive cleaners.
Where can I find spare parts for the PXE-0850S?
Spare parts are available through Alpine authorized service centers or your local car audio dealer.
User questions about PXE-0850S ALPINE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual PXE-0850S - ALPINE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PXE-0850S by ALPINE.
USER MANUAL PXE-0850S ALPINE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ALPINE
Model : PXE-0850S
Category : Receiver