ATE51D - Water heater ASPES - Free user manual and instructions
Find the device manual for free ATE51D ASPES in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Storage Water Heater |
| Brand | Aspes |
| Model | ATE51D |
| Capacity | 40 liters |
| Power | 2000 W |
| Voltage | 220-240 V / 50 Hz |
| Dimensions (H x W x D) | Approx. 640 x 400 x 400 mm |
| Weight (empty) | Approx. 15 kg |
| Temperature Setting | Adjustable thermostat, range 30-75°C |
| Thermal Insulation | Polyurethane foam, high efficiency |
| Safety Features | Overheat protection, pressure relief valve, thermal fuse |
| Material | Enamel-coated steel tank, plastic outer shell |
| Installation Type | Wall-mounted, vertical or horizontal |
| Water Connection | Standard 1/2" BSP female thread |
| Energy Class | C (EU energy label) |
| Standby Power Consumption | 0.5 W (approx.) |
| Heating Element | Copper-sheathed, replaceable |
| Anode Protection | Magnesium anode rod, requires periodic check |
| Maintenance | Descaling recommended every 6-12 months |
| Spare Parts Available | Heating element, thermostat, anode, safety valve |
| Reparability Index | 7/10 (common parts available) |
| Warranty | 2 years (typical) |
Frequently Asked Questions - ATE51D ASPES
How do I install the Aspes ATE51D water heater?
Installation must be performed by a qualified professional. Ensure the wall can support the weight (approx. 15 kg empty). Connect the water supply to the 1/2 inch inlet, and install the safety valve. Connect to a 230V outlet with proper grounding. Follow the manual for exact steps.
What is the maximum temperature setting?
The thermostat can be adjusted up to 75°C. For normal use, a setting of 55-60°C is recommended for energy savings and to prevent scalding.
Why is there no hot water?
Check if the power supply is on and the thermostat is set correctly. Also verify that the overheat protection hasn't tripped. If the heating element is faulty, it may need replacement. Refer to the troubleshooting section in the manual.
How often should I perform maintenance?
Inspect the magnesium anode every 6 to 12 months; replace if heavily corroded. Descale the heating element annually, especially in hard water areas. Check the safety valve operation monthly.
What safety features does the ATE51D have?
It includes overheat protection, a pressure relief valve, and a thermal fuse. These prevent excessive temperature and pressure buildup.
Can I install the water heater horizontally?
Yes, the ATE51D can be mounted either vertically or horizontally. However, ensure the water connections are oriented correctly and the unit is level.
Where can I find spare parts?
Common spare parts like the heating element, thermostat, and anode rod are available through authorized Aspes service centers or online retailers. Use the exact model number ATE51D when ordering.
What is the energy efficiency class?
The energy efficiency class is C under the EU energy label. Actual consumption depends on usage and temperature setting.
How do I reset the overheat protection?
Turn off the power supply and wait for the unit to cool down. Locate the reset button (usually a red button on the thermostat) and press it. If it trips again, consult a technician.
Is the tank made of stainless steel?
No, the tank is made of enamel-coated steel. The enamel layer protects against corrosion. A magnesium anode further extends the tank's life.
User questions about ATE51D ASPES
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual ATE51D - ASPES and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ATE51D by ASPES.
USER MANUAL ATE51D ASPES
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ASPES
Model : ATE51D
Category : Water heater