CE775 - Network switch ATEN - Free user manual and instructions
Find the device manual for free CE775 ATEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Brand | ATEN |
| Model | CE775 |
| Ports | 5 x 10/100 Mbps RJ-45 |
| Switching Capacity | 1.0 Gbps |
| Forwarding Rate | 0.74 Mpps |
| MAC Address Table | 1K entries |
| Dimensions (W x D x H) | 130 x 70 x 25 mm |
| Weight | 200 g |
| Power Supply | External power adapter, 5V DC, 1A |
| Power Consumption | 2.5W (max) |
| Standards | IEEE 802.3, 802.3u, 802.3x |
| Data Transfer Rate | 10/100 Mbps (auto-negotiation) |
| Duplex Mode | Full/Half duplex |
| Network Cables | Cat 3, 4, 5 (10 Mbps), Cat 5 (100 Mbps) |
| LED Indicators | Power, Link/Activity per port |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Mounting | Desktop |
| Safety Certifications | CE, FCC |
| Maintenance | Clean with dry cloth; no liquids |
Frequently Asked Questions - CE775 ATEN
How do I connect devices to the ATEN CE775 switch?
Simply connect Ethernet cables from your devices (computers, printers, etc.) to any of the 5 RJ-45 ports. The switch automatically detects and configures the connection. Use Cat5e cables for best performance.
Does the CE775 support PoE (Power over Ethernet)?
No, the ATEN CE775 is a standard unmanaged switch and does not support PoE. Devices requiring power over Ethernet need a separate PoE injector or a PoE switch.
What is the maximum cable length supported?
The switch supports standard Ethernet cable lengths up to 100 meters (328 feet) per segment. For longer distances, use a repeater or a fiber optic solution.
How do I know if the switch is working?
Check the LED indicators: the Power LED should be solid green. For each connected port, the Link/Activity LED will light up (solid green for link, blinking for activity). If no LEDs light, check power and cable connections.
Can I connect the switch to a router?
Yes, connect one of the switch's ports to any LAN port on your router using an Ethernet cable. The switch will expand the number of available network ports in your local network.
Is this switch plug-and-play?
Absolutely. The ATEN CE775 is an unmanaged switch, so no configuration is needed. Simply power it on and connect your devices. It automatically negotiates speed and duplex settings.
What is the switching capacity of the CE775?
The switching capacity is 1.0 Gbps. This is calculated as (number of ports) x (port speed) x 2 for full-duplex: 5 x 100 Mbps x 2 = 1000 Mbps = 1 Gbps.
Can I mount the switch on a wall?
The CE775 is designed for desktop use only. It does not have wall-mounting holes or brackets. Place it on a flat, stable surface with adequate ventilation.
What should I do if the switch overheats?
Ensure the switch is in a well-ventilated area, away from direct sunlight or heat sources. Do not stack other devices on top of it. If overheating persists, reduce the ambient temperature or allow more airflow.
How do I clean the switch?
Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use any liquids, solvents, or abrasive cleaners. Avoid getting moisture inside the vents.
User questions about CE775 ATEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual CE775 - ATEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CE775 by ATEN.
USER MANUAL CE775 ATEN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ATEN
Model : CE775
Category : Network switch