VM1616T - Network switch ATEN - Free user manual and instructions
Find the device manual for free VM1616T ATEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Network Switch |
| Ports | 16 x 10/100/1000 Mbps |
| Form Factor | Rackmount 1U |
| Dimensions (W x D x H) | 440 x 200 x 44 mm |
| Weight | 2.5 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 30W |
| Cooling | Fan |
| LED Indicators | Power, Link/Activity per port |
| VLAN Support | Yes (802.1Q) |
| Quality of Service | Yes |
| IGMP Snooping | Yes |
| Management | Web GUI, SNMP, CLI |
| MAC Address Table | 8K |
| Jumbo Frame | 9K |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Certifications | CE, FCC, RoHS |
| Warranty | 3 years |
Frequently Asked Questions - VM1616T ATEN
How do I reset the VM1616T to factory defaults?
Press and hold the Reset button on the front panel for 10 seconds using a paperclip until the power LED blinks. Release and wait for the switch to reboot.
What is the default IP address for management?
The default management IP is 192.168.0.100 with subnet mask 255.255.255.0. Access via web browser on port 80.
How do I configure VLANs on the VM1616T?
Log in to the web GUI, go to VLAN Configuration. Create VLANs with 802.1Q tagging and assign ports accordingly. Ensure the PVID matches for untagged traffic.
Can I use the VM1616T with PoE devices?
No, the VM1616T is a non-PoE switch. Use a PoE injector or a PoE switch if you need to power devices like cameras.
How do I update the firmware?
Download the latest firmware from the ATEN support website. Then in the web GUI, go to System > Firmware Upgrade and upload the file. Do not power off during upgrade.
What is the maximum cable length for the ports?
For 1000BASE-T, the maximum cable length is 100 meters using Cat5e or better cable.
How do I enable IGMP snooping for multicast?
In the web GUI, go to Multicast > IGMP Snooping. Enable IGMP Snooping and configure settings as needed. This optimizes multicast traffic.
Why is the switch not powering on?
Check the power cable connection and ensure the outlet is live. Verify the power supply with a multimeter. If still no power, the unit may need service.
How do I set up port mirroring?
Go to Monitoring > Port Mirroring. Select the source port (target) and destination port (monitor). Only one mirror session is supported.
What is the warranty period for the VM1616T?
The standard warranty is 3 years. Extended warranty options may be available through ATEN or your reseller.
User questions about VM1616T ATEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual VM1616T - ATEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VM1616T by ATEN.
USER MANUAL VM1616T ATEN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ATEN
Model : VM1616T
Category : Network switch