DBSR463EGWW - Tumble dryer GE - Free user manual and instructions
Find the device manual for free DBSR463EGWW GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | GE |
| Model | DBSR463EGWW |
| Capacity | 7.0 cu. ft. |
| Dimensions (W x D x H) | 27 in x 25.5 in x 36 in |
| Weight | 115 lbs |
| Power Requirements | 240V, 30A, 60Hz |
| Dry Cycles | Normal, Delicate, Timed Dry, Air Fluff |
| Drying System | Sensor Dry with automatic moisture sensing |
| Temperature Settings | High, Medium, Low, No Heat |
| Lint Filter | Removable, located on top of dryer |
| Drum Material | Powder-coated steel |
| Door Style | Reversible, front-load |
| Control Type | Rotary dial and push buttons |
| End of Cycle Signal | Audible, adjustable volume |
| Venting | 4-way rear venting, 4 in duct |
| Energy Star Certified | Yes |
| Warranty | 1 year parts and labor |
| Color | White |
Frequently Asked Questions - DBSR463EGWW GE
How do I clean the lint filter?
Remove the lint filter from the top of the dryer. Use a soft brush or vacuum to remove lint. Rinse under water if necessary and dry thoroughly before reinserting.
What is the maximum load size for this dryer?
The dryer has a 7.0 cu. ft. capacity. For best results, do not overload; fill loosely to allow proper tumbling.
How do I reverse the door swing?
The door is reversible. Consult the installation manual for step-by-step instructions. You will need a screwdriver and possibly a putty knife.
Why is my dryer not heating?
Check that the thermal fuse is not blown, the heating element is intact, and the gas supply (if gas model) is on. Also ensure the power cord is securely connected.
How often should I clean the exhaust vent?
Clean the exhaust vent at least once a year to prevent lint buildup and reduce fire risk. Use a vent cleaning kit or vacuum.
Can I install this dryer in a closet?
Yes, but there must be adequate ventilation. Leave at least 1 inch clearance on sides and rear. Follow local codes for venting.
What does the 'Sensor Dry' cycle do?
The Sensor Dry cycle uses moisture sensors to automatically stop the dryer when clothes are dry, preventing overdrying and saving energy.
How do I reset the dryer after a power outage?
Unplug the dryer for 5 minutes, then plug it back in. Press the Start button to resume operation.
Why does my dryer take longer than usual to dry?
Check for a clogged lint filter, kinked vent hose, or overloaded drum. Also ensure the exhaust vent is clear.
Is this dryer compatible with a stackable washer?
Yes, this dryer is designed to be stacked with a compatible GE washer using a stacking kit (sold separately).
User questions about DBSR463EGWW GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual DBSR463EGWW - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DBSR463EGWW by GE.