BE10D - Subwoofer BOSS - Free user manual and instructions
Find the device manual for free BE10D BOSS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered subwoofer |
| Model | BE10D |
| Brand | Boss |
| Speaker Size | 10 inches |
| Peak Power | 600 watts |
| RMS Power | 250 watts |
| Impedance | 4 ohms |
| Frequency Response | 30 Hz – 250 Hz |
| Sensitivity | 90 dB |
| Enclosure Type | Sealed |
| Dimensions (W x H x D) | 12.6 x 12.2 x 13.4 inches |
| Net Weight | 14.3 lbs |
| Power Supply | 12V DC (vehicle battery) |
| Amplifier Class | Class AB |
| Wiring Kit Required | 8 gauge power and ground |
| Remote Subwoofer Control | Wired remote included |
| Low Pass Crossover | 50 Hz – 250 Hz adjustable |
| Phase Control | 0° or 180° |
| Subwoofer Level Control | Variable from remote |
| Protection Circuits | Thermal, over-current, DC offset |
| Installation | For vehicles with 12V electrical system |
| Maintenance | Keep grille clean, avoid moisture |
| Safety | Disconnect battery before installation |
Frequently Asked Questions - BE10D BOSS
What is the RMS power rating of the Boss BE10D subwoofer?
The Boss BE10D has an RMS power rating of 250 watts and a peak power of 600 watts.
What size is the subwoofer driver?
The BE10D features a 10-inch driver.
Does the subwoofer come with a remote control?
Yes, it includes a wired remote subwoofer control for adjusting volume, bass boost, and phase.
What type of enclosure does the BE10D use?
It uses a sealed enclosure for accurate bass response.
What are the dimensions of the Boss BE10D subwoofer?
Approximately 12.6 x 12.2 x 13.4 inches (W x H x D).
What is the impedance of the subwoofer?
The impedance is 4 ohms.
How do I install the Boss BE10D in my car?
Connect the power wire to your car's 12V battery, ground to a clean metal point, and connect the RCA inputs to your head unit. Use an 8-gauge wiring kit.
Does the subwoofer have a low-pass crossover?
Yes, it has an adjustable low-pass crossover from 50 Hz to 250 Hz.
What safety precautions should I take during installation?
Always disconnect the vehicle's battery before installation to avoid shorts. Fuse the power wire near the battery.
Can I use the BE10D in a home audio system?
It is designed for 12V DC car systems, but you can use a 12V power supply at home, though not recommended due to high current draw.
User questions about BE10D BOSS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual BE10D - BOSS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BE10D by BOSS.
USER MANUAL BE10D BOSS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BOSS
Model : BE10D
Category : Subwoofer