BE12D - Subwoofer BOSS - Free user manual and instructions
Find the device manual for free BE12D BOSS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | BOSS Audio |
| Model | BE12D |
| Size | 12 inches |
| Impedance | Dual 4 Ohm |
| Power Handling (RMS) | 400 Watts |
| Power Handling (Peak) | 1200 Watts |
| Sensitivity | 86 dB |
| Frequency Response | 25 Hz - 1 kHz |
| Mounting Depth | 6.5 inches |
| Mounting Diameter | 11.2 inches |
| Cutout Diameter | 11.0 inches |
| Displacement | 0.2 cubic feet |
| Recommended Enclosure Sealed | 1.0 - 1.5 cubic feet |
| Recommended Enclosure Ported | 1.5 - 2.5 cubic feet |
| Voice Coil | Dual 2-layer copper |
| Magnet Material | Ferrite |
| Surround Material | Rubber |
| Cone Material | Polypropylene |
| Terminals | Push-type |
| Weight | 12.5 lbs |
| Dimensions (Diameter x Depth) | 12.6 x 7.5 inches |
| Cleaning Instructions | Wipe with a dry, soft cloth. Do not use solvents. |
| Safety Warnings | Ensure proper mounting to avoid damage. Do not expose to moisture. |
| Spare Parts Availability | Contact BOSS customer service for replacement parts. |
Frequently Asked Questions - BE12D BOSS
What is the impedance of the BOSS BE12D subwoofer?
The BOSS BE12D has a dual 4 Ohm voice coil, allowing wiring configurations for 2 Ohm or 8 Ohm loads.
What is the RMS power handling of this subwoofer?
The RMS power handling is 400 Watts, with a peak power of 1200 Watts.
What size enclosure is recommended for the BE12D?
For a sealed enclosure, use 1.0 - 1.5 cubic feet. For a ported enclosure, use 1.5 - 2.5 cubic feet.
How do I wire the dual voice coil subwoofer?
You can wire it in series for an 8 Ohm load or in parallel for a 2 Ohm load. Ensure your amplifier is stable at the chosen impedance.
What is the mounting depth of the BE12D?
The mounting depth is 6.5 inches, so ensure your enclosure has sufficient depth for installation.
Can I use this subwoofer in a ported enclosure?
Yes, the BE12D works well in both sealed and ported enclosures. For ported, use a volume of 1.5 - 2.5 cubic feet with a port tuned to 35 Hz.
What is the sensitivity of the BOSS BE12D?
The sensitivity is 86 dB, which is typical for a 12-inch subwoofer and requires adequate amplifier power.
Is the BOSS BE12D suitable for a car audio system?
Yes, it is designed for car audio use. It requires a subwoofer amplifier and proper enclosure for best performance.
How do I clean the subwoofer?
Clean the subwoofer with a dry, soft cloth. Avoid using chemical solvents or water to prevent damage.
Does the BE12D come with a warranty?
BOSS Audio typically offers a 1-year warranty on their subwoofers. Check the product packaging or contact support for details.
User questions about BE12D BOSS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual BE12D - BOSS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BE12D by BOSS.
USER MANUAL BE12D BOSS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BOSS
Model : BE12D
Category : Subwoofer