GHO12V-08N - Multifunction tool BOSCH - Free user manual and instructions
Find the device manual for free GHO12V-08N BOSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless wood planer |
| Brand | Bosch |
| Model | GHO12V-08N |
| Battery voltage | 12 V |
| Battery type | Lithium-ion (Bosch 12V system) |
| No-load speed | 14,000 rpm |
| Planing width | 82 mm |
| Adjustable cutting depth | 0 - 1.6 mm |
| Rebating (chamfering) | Yes, with integrated chamfer guide |
| Weight (without battery) | 2.3 kg |
| Dimensions (L x W x H) | 280 x 160 x 150 mm |
| Spindle lock | Yes, for blade change |
| Safety switch | Two-finger switch with lock-off |
| Dust extraction port | Yes, for dust extraction |
| Parallel guide included | Yes |
| Dust bag included | Yes |
| Maintenance and cleaning | Regularly clean ventilation slots and replace dull blades |
| Spare parts and repairability | Blades, blade holders, parallel guide, dust bag available |
| Manufacturer warranty | 2 years (according to conditions) |
Frequently Asked Questions - GHO12V-08N BOSCH
How to change the blades of the Bosch GHO12V-08N planer?
To change the blades, use the spindle lock to immobilize the shaft. Unscrew the blade fixing screws with an Allen key, remove the old blades, place the new ones aligning the marks, then tighten firmly. Refer to the manual for torque settings.
Which battery to use with the GHO12V-08N?
Use exclusively Bosch 12V Lithium-ion batteries from the GBA 12V series. Higher capacity batteries (2.0 Ah, 4.0 Ah, 6.0 Ah) are compatible but increase weight.
How to adjust the cutting depth?
The cutting depth is adjusted with a knob on the side of the planer. Turn it clockwise to increase depth (up to 1.6 mm) and counterclockwise to decrease. Test on a scrap piece of wood before use.
My planer does not start, what should I do?
First check that the battery is charged and properly engaged. Make sure the safety switch is unlocked. If the problem persists, the control unit may be defective; contact Bosch customer service.
How to maintain the Bosch GHO12V-08N planer?
Regularly clean the ventilation slots with a dry brush. Replace blades as soon as they are dull to avoid overheating. Store the tool in a dry, dust-free place.
Can I use the planer for rebating?
Yes, the planer can make chamfers and rebates using the integrated chamfer guide. Set the desired depth and guide the tool along the workpiece.
What spare parts are available?
Common spare parts include: replacement blades (ref. 2 608 650 087), blade holders, parallel guide, dust bag, and sliding pads. Check the Bosch website for the full list.
How to clean the dust bag?
Empty the bag after each use. Wash it in warm soapy water if necessary, dry completely before replacing. Do not use harsh solvents.
Is the planer delivered with a parallel guide?
Yes, the Bosch GHO12V-08N is delivered with a parallel guide for precise cuts. It attaches to the side of the planer and allows straight guiding.
What is the noise level of this planer?
The noise level is approximately 82 dB(A) under load, with a sound pressure of 71 dB(A). Always wear hearing protection during use.
User questions about GHO12V-08N BOSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multifunction tool in PDF format for free! Find your manual GHO12V-08N - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GHO12V-08N by BOSCH.
USER MANUAL GHO12V-08N BOSCH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BOSCH
Model : GHO12V-08N
Category : Multifunction tool