KL 1300 Extra - Pressure washer Comet - Free user manual and instructions
Find the device manual for free KL 1300 Extra Comet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | High-pressure cleaner |
| Brand | Comet |
| Model | KL 1300 Extra |
| Dimensions (L x W x H) | 45 x 35 x 30 cm |
| Weight | 16 kg |
| Power supply | Electric 230 V / 50 Hz |
| Motor power | 1300 W |
| Maximum pressure | 130 bar |
| Maximum water flow | 420 l/h |
| Max. water inlet temperature | 40 °C |
| Pump type | Axial piston pump |
| Main functions | High-pressure cleaning, integrated detergent, pressure regulator |
| Supplied accessories | Gun, lance, rotating nozzle, foam nozzle, 10 m hose |
| Maintenance and cleaning | Clean the water inlet filter, drain the pump in winter |
| Safety | Automatic shut-off in case of water shortage, thermal fuse |
| Spare parts and repairability | Seals, valves, pistons available; repairability index 7.5/10 |
| General information | Intensive domestic use, sound level 75 dB(A) |
Frequently Asked Questions - KL 1300 Extra Comet
How to start the Comet KL 1300 Extra high-pressure cleaner?
Plug the appliance into a 230 V socket, open the water tap, then press the on/off switch located on the side of the appliance.
Can I use hot water with this model?
Yes, but the water inlet temperature must not exceed 40 °C to avoid damaging the pump.
How to adjust the output pressure?
Turn the pressure adjustment knob located on the gun. The KL 1300 Extra allows progressive pressure adjustment.
What to do if the pressure is low or irregular?
Check that the water inlet filter is not clogged, the hose is not kinked, and the water supply is sufficient (min. flow rate 500 l/h).
How to use the detergent?
Fill the integrated detergent tank, then use the low-pressure nozzle (foam nozzle) to apply the product. Then rinse at high pressure.
What type of detergent can I use?
Use only detergents specifically designed for high-pressure cleaners. Avoid acidic or corrosive products that could damage the pump.
How to winterize the appliance to protect it from frost?
Completely drain the pump by running the appliance without pressure for a few seconds, then store it in a frost-free location.
The rotating nozzle does not rotate, what to do?
Disassemble the nozzle and clean it with a fine needle. Make sure the seals are in good condition and the bearing is not seized.
Where to find spare parts for the KL 1300 Extra?
You can order spare parts (seals, valves, pistons, etc.) from authorized Comet dealers or on the brand's official website.
What to do in case of water leakage under the appliance?
Immediately stop the appliance and check the water circuit connections. If the leak comes from the pump, contact customer service.
User questions about KL 1300 Extra Comet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual KL 1300 Extra - Comet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KL 1300 Extra by Comet.
USER MANUAL KL 1300 Extra Comet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Comet
Model : KL 1300 Extra
Category : Pressure washer