CP-X1200 - Video projector HITACHI - Free user manual and instructions
Find the device manual for free CP-X1200 HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Video Projector |
| Brand | Hitachi |
| Model | CP-X1200 |
| Display Technology | 3LCD |
| Native Resolution | XGA (1024 x 768) |
| Brightness | 2500 ANSI Lumens |
| Contrast Ratio | 500:1 |
| Aspect Ratio | 4:3 (Native), 16:9 Compatible |
| Lamp Type | UHP |
| Lamp Life (Normal Mode) | 2000 hours |
| Zoom | Manual (1.2x) |
| Keystone Correction | Vertical ±30° |
| Input Ports | VGA x 2, S-Video, Composite, Audio |
| Output Ports | VGA Monitor Out, Audio Out |
| Dimensions (W x D x H) | 310 x 230 x 100 mm |
| Weight | 3.5 kg |
| Power Consumption | 310 W |
| Noise Level | 35 dB (Eco Mode 30 dB) |
| Included Accessories | Remote Control, Power Cable, VGA Cable, Manual |
| Safety Certifications | UL, CE, FCC Class A |
| Lens Shift | Not Supported |
| Filter Cleaning Interval | Every 100 hours (approximate) |
| Warranty | 2 Years Limited (Lamp 90 Days) |
Frequently Asked Questions - CP-X1200 HITACHI
How do I replace the lamp in the Hitachi CP-X1200?
Turn off and unplug the projector. Wait for it to cool. Remove the lamp cover screw and slide the cover off. Loosen the lamp screws, remove the old lamp, and insert the new one. Tighten screws, replace cover, and reset lamp timer via the menu.
What is the native resolution of the CP-X1200?
The native resolution is XGA (1024 x 768) with a 4:3 aspect ratio.
Can I connect a laptop to the CP-X1200?
Yes, use a VGA cable from your laptop to the projector's VGA input (Computer 1 or 2).
Select the corresponding input source using the remote or control panel.
Select the corresponding input source using the remote or control panel.
How do I clean the air filter?
Locate the filter on the side or bottom. Gently remove it, vacuum or wash with mild soap and water, dry completely, and reinsert. Clean every 100 hours of use.
Why is my projector overheating and shutting down?
Ensure the air filter is clean and ventilation areas are unobstructed. Check that the projector is not near heat sources. If problem persists, the lamp may need replacement.
What is the lamp life of the CP-X1200?
The lamp life is 2000 hours in normal mode. Eco mode can extend it slightly.
How can I adjust the image size?
Use the zoom ring on the lens for fine adjustment. Move the projector closer to or farther from the screen for larger/smaller images.
Does the CP-X1200 support widescreen (16:9) input?
Yes, it automatically scales 16:9 signals to fit within 4:3. You can also select aspect ratio modes via the menu.
How do I reset the lamp counter?
After replacing the lamp, go to the menu, select 'Options' or 'Maintenance', then Lamp Reset. Press 'OK' to confirm.
Is the CP-X1200 compatible with 3D content?
No, this model does not support 3D. It is designed for standard 2D projection.
User questions about CP-X1200 HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual CP-X1200 - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CP-X1200 by HITACHI.
USER MANUAL CP-X1200 HITACHI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HITACHI
Model : CP-X1200
Category : Video projector