CP-X4030WN - Video projector HITACHI - Free user manual and instructions
Find the device manual for free CP-X4030WN HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Projector |
| Brand | Hitachi |
| Model | CP-X4030WN |
| Display Technology | 3LCD |
| Native Resolution | XGA (1024 x 768) |
| Brightness (ANSI Lumens) | 4000 lm |
| Contrast Ratio | 2000:1 |
| Lamp Type | UHB 250W |
| Lamp Life (Normal / Eco) | 2000 h / 3000 h |
| Projection Size | 30 - 300 inches |
| Throw Ratio | 1.6 - 2.0:1 |
| Keystone Correction | Vertical ±30° |
| Input Terminals | HDMI, VGA (2x), S-Video, Composite, Audio |
| Output Terminals | VGA, Audio, USB (service) |
| Dimensions (W x D x H) | 317 x 245 x 98 mm |
| Weight | 3.1 kg |
| Power Consumption (Normal / Standby) | 310 W / <0.5 W |
| Noise Level (Normal / Eco) | 35 dB / 29 dB |
| Included Accessories | Remote Control, Batteries, Power Cable, Manual |
| Maintenance | Filter cleaning every 500h; Lamp replacement |
| Safety Features | Overheat protection, Auto power off |
Frequently Asked Questions - CP-X4030WN HITACHI
How do I replace the lamp in my Hitachi CP-X4030WN?
Turn off the projector and unplug it. Wait 30 minutes for cooling. Remove the lamp cover screw, open cover, release lamp module, install new lamp (model: DT01011), tighten screws, replace cover. Reset lamp timer in menu.
What is the recommended projection distance for a 100-inch screen?
Based on the throw ratio of 1.6-2.0:1, a 100-inch diagonal image requires a distance of approximately 3.2 to 4.0 meters from lens to screen.
Can I connect a Blu-ray player to this projector?
Yes, use the HDMI input. The projector supports HDCP and will display up to 1080p signals, downscaling to its native XGA resolution.
How do I clean the air filter?
Clean the filter every 500 hours of use. Turn off and unplug the projector. Locate the filter on the side, slide it out, vacuum or wash with mild detergent, dry completely, and reinsert.
What does the 'Lamp' indicator mean?
A flashing or solid Lamp indicator warns that the lamp life is near its end or the lamp has failed. Replace the lamp and reset the timer. If the problem persists, check the lamp cover is closed properly.
Is this projector suitable for ceiling mounting?
Yes, the CP-X4030WN supports ceiling mount. Ensure to use a compatible mount (M4 screws, max depth 10mm). Adjust the menu setting to Ceiling Mount for correct image orientation.
How can I adjust keystone distortion?
Press the KEYSTONE button on the remote or enter the menu. Use the arrow keys to correct vertical keystone up to ±30 degrees. For best quality, keep keystone correction minimal.
What is the maximum screen size supported?
The projector can display images from 30 to 300 inches diagonally. At maximum zoom, the throw distance must be adjusted accordingly.
How do I reset the lamp counter?
After replacing the lamp, go to Menu > Settings > Lamp Timer. Press and hold the RESET button for 3 seconds, then confirm. The lamp time will be reset to zero.
What type of batteries does the remote control use?
The remote control requires two AAA batteries (alkaline recommended). Insert with correct polarity (+/-).
User questions about CP-X4030WN HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual CP-X4030WN - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CP-X4030WN by HITACHI.
USER MANUAL CP-X4030WN HITACHI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HITACHI
Model : CP-X4030WN
Category : Video projector