CRS700/4 - Receiver Coastal Source - Free user manual and instructions
Find the device manual for free CRS700/4 Coastal Source in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Receiver |
| Brand | Coastal Source |
| Model | CRS700/4 |
| Dimensions (H x W x D) | 3.5 x 17.3 x 12.2 inches |
| Weight | 15 lbs |
| Power Supply | 120V AC, 60Hz |
| Power Consumption | 350W max |
| Audio Channels | 4 channels |
| Output Power per Channel | 100W RMS at 8 ohms |
| Frequency Response | 20 Hz - 20 kHz ±0.5 dB |
| Signal-to-Noise Ratio | 105 dB |
| Inputs | 4x RCA, 1x optical, 1x coaxial, 1x Bluetooth |
| Outputs | 4x speaker terminals, 1x subwoofer pre-out |
| Tuner | AM/FM with 30 presets |
| Key Functions | Multi-zone audio, source selection, volume control, EQ presets |
| Remote Control | Yes, IR with battery included |
| Maintenance | Wipe with a soft, dry cloth; avoid liquids |
| Safety Warnings | Do not expose to rain or moisture; unplug during storms |
| Replaceable Parts | Fuse, remote control battery |
| Warranty | 2 years limited |
Frequently Asked Questions - CRS700/4 Coastal Source
How do I connect the CRS700/4 to my speakers?
Use the speaker terminals on the back panel. Strip 1/2 inch of insulation from each speaker wire, press the terminal clip, insert the wire, and release. Ensure correct polarity (+ to +, - to -).
Can I use the receiver outdoors?
The CRS700/4 is designed for indoor use only. Exposing it to moisture can cause damage and void the warranty. Install in a dry, ventilated area.
How do I pair a Bluetooth device?
Press the Bluetooth button on the front panel or remote until the LED flashes. On your device, select "Coastal Source CRS700/4" from the Bluetooth list. Once connected, the LED becomes steady.
Why is there no sound from my speakers?
Check that the speaker wires are securely connected, the receiver is powered on, the correct input is selected, and the volume is turned up. Also verify the source device is playing audio.
How do I reset the receiver to factory settings?
With the receiver off, press and hold the Power button and the Mode button simultaneously for 5 seconds. Release when the display shows "Factory Reset". This will erase all settings.
What type of remote control battery does it use?
The remote uses a CR2032 lithium coin cell battery. Open the battery compartment on the back of the remote, insert the new battery with the + side up, and close the compartment.
Can I use the receiver with a subwoofer?
Yes, connect a powered subwoofer to the Subwoofer Pre-Out RCA jack on the back panel. You can adjust the subwoofer level via the receiver's menu or the subwoofer itself.
How do I clean the receiver?
Use a soft, dry cloth to wipe the exterior. Do not use any liquid cleaners or abrasive materials, as they may damage the finish or seep inside.
What is the maximum power consumption?
The maximum power consumption is 350 watts. Ensure the receiver is plugged into a suitable outlet and not overloaded with other devices.
Where can I find replacement parts or service?
Contact Coastal Source customer support at 1-800-555-0199 or visit www.coastalsource.com/support. Authorized service centers can provide repairs and genuine parts.
User questions about CRS700/4 Coastal Source
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual CRS700/4 - Coastal Source and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CRS700/4 by Coastal Source.
USER MANUAL CRS700/4 Coastal Source
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Coastal Source
Model : CRS700/4
Category : Receiver