VT-2412 - Dimmer V-TAC - Free user manual and instructions
Find the device manual for free VT-2412 V-TAC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dimmer |
| Brand | V-TAC |
| Model | VT-2412 |
| Rated Voltage | 230V AC |
| Frequency | 50/60 Hz |
| Max Load (Incandescent/Halogen) | 400W |
| Max Load (Dimmable LED/CFL) | 100W |
| Load Types | Incandescent, Halogen, Dimmable LED, Dimmable CFL |
| Control Type | Rotary Knob |
| Dimensions (HxWxD) | 85 x 85 x 45 mm |
| Weight | 100 g |
| Material | ABS Plastic |
| Protection Features | Overload, Short Circuit |
| Operating Temperature | -10°C to 40°C |
| Degree of Protection | IP20 (Indoor Use) |
| Wiring Type | Single Pole (One-Way) |
| Color | White |
| Certifications | CE, RoHS |
| Warranty | 2 Years |
| Installation Method | Wall Mount, Flush Mount |
| Minimum Load (LED) | 5W |
| Compatible Dimming Range | 0-100% |
| Standby Power Consumption | <0.5W |
Frequently Asked Questions - VT-2412 V-TAC
Can I use the V-TAC VT-2412 with LED bulbs?
Yes, but only with dimmable LED bulbs. The rated max load for LED is 100W. Ensure compatibility to avoid flickering.
What is the maximum wattage for incandescent bulbs?
The maximum load for incandescent or halogen bulbs is 400W.
Is this dimmer suitable for three-way switching?
No, the VT-2412 is designed for single-pole (one-way) switching only. It cannot be used in three-way circuits.
How do I install the dimmer?
Installation requires connecting the dimmer to the live and load wires. Turn off power at the breaker before installation. Follow the wiring diagram in the manual.
What should I do if the dimmer causes flickering?
Flickering can occur due to incompatible bulbs or overload. Try dimmable LED bulbs rated for trailing-edge dimmers. Also check that the total load is within limits.
Does the dimmer have a built-in on/off switch?
Yes, the rotary knob also acts as an on/off switch. Turn to the 'off' position to completely disconnect the load.
What is the operating voltage?
The dimmer operates at 230V AC, 50/60 Hz.
Can I use it with fans?
No, this dimmer is designed for resistive and capacitive loads (lighting). Using it with fans may cause damage.
How do I clean the dimmer?
Wipe with a dry, soft cloth. Do not use water or cleaning solvents.
Is the dimmer compatible with smart home systems?
No, the VT-2412 is a manual rotary dimmer and does not support smart home integration.
User questions about VT-2412 V-TAC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dimmer in PDF format for free! Find your manual VT-2412 - V-TAC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VT-2412 by V-TAC.
USER MANUAL VT-2412 V-TAC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : V-TAC
Model : VT-2412
Category : Dimmer