157 - Heating BROAN - Free user manual and instructions
Find the device manual for free 157 BROAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-Mounted Heater |
| Dimensions (WxHxD) | 12 x 8 x 4 inches |
| Weight | 4.5 lbs |
| Power Supply | 120V / 60Hz |
| Wattage | 1500 W |
| Heat Settings | Low (750W), High (1500W) |
| Fan | Built-in fan for air circulation |
| Thermostat | Adjustable thermostat control |
| Overheat Protection | Automatic shut-off at high temperature |
| Tip-Over Switch | Safety switch that disables unit if tipped |
| Installation | Hardwired or plug-in; wall mounting brackets included |
| Material | Metal housing with powder-coated finish |
| Color | White or off-white |
| Noise Level | ~45 dB on high setting |
| Energy Efficiency | Fan-only mode available |
| Cleaning | Wipe with damp cloth; do not immerse |
| Filter | Washable mesh filter (rear intake) |
| Replacement Parts | Thermostat, heating element, fan motor available |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - 157 BROAN
How do I install the BROAN 157 heater?
The heater can be hardwired or plugged into a 120V outlet. Use the included mounting bracket to secure it to the wall. Ensure clearance from combustibles as per manual.
What are the dimensions of the BROAN 157?
Approximately 12 inches wide, 8 inches high, and 4 inches deep. Weight is about 4.5 lbs.
How do I clean the BROAN 157 heater?
Unplug the unit. Use a damp cloth to wipe the exterior. The rear intake filter is washable; remove it and rinse with water. Dry before reinstalling.
What safety features does the BROAN 157 have?
It includes overheat protection (auto shut-off) and a tip-over switch that cuts power if the unit is knocked over.
Why is my BROAN 157 not heating?
Check if the thermostat is set high enough. Ensure the unit is plugged in and the circuit breaker is not tripped. If overheat protection activated, let it cool down and reset.
Can I use the BROAN 157 in a bathroom?
It is not recommended for bathrooms as it is not rated for damp locations. Use only in dry areas.
Does the BROAN 157 have a fan-only mode?
Yes, when set to low heat, the fan runs at lower speed; on high, full speed. There is no separate fan-only setting.
What is the wattage of the BROAN 157?
1500 watts on high setting, 750 watts on low setting. This provides 5120 BTU/h.
How do I replace the heating element?
Disconnect power. Remove the front grille and unscrew the element. Obtain a replacement from Broan. Installation is reverse of removal.
Is the BROAN 157 energy efficient?
It has a simple on/off thermostat and no programmable timer. For energy savings, use the low heat setting and turn off when not needed.
User questions about 157 BROAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual 157 - BROAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 157 by BROAN.
USER MANUAL 157 BROAN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BROAN
Model : 157
Category : Heating