Showtec

PSA-32A6S - Extension block Showtec - Free user manual and instructions

Find the device manual for free PSA-32A6S Showtec in PDF.

📄 16 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Showtec PSA-32A6S - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Power Distribution Block
Brand Showtec
Model PSA-32A6S
Number of Outlets 6
Maximum Current 32 A
Voltage Rating 230 V AC / 50 Hz
Power Rating 7360 W
Outlet Type Schuko (CEE 7/4) or compatible
Cable Length 1.5 m
Housing Material Aluminum
Dimensions (W x D x H) 400 mm x 100 mm x 80 mm
Weight 1.8 kg
Protection Rating IP20
Overload Protection Integrated circuit breaker
Safety Features Overload and short-circuit protection
Operating Temperature -5°C to 40°C
Lifespan 10 years under normal conditions
Cleaning Instructions Wipe with a dry cloth; do not use water or solvents
Maintenance Inspect plugs and cable regularly for damage
Spare Parts Availability Contact Showtec distributor for replacement cable or outlet modules
Repair Information Only qualified personnel should open the unit; no user-serviceable parts inside

Frequently Asked Questions - PSA-32A6S Showtec

What is the maximum load for the Showtec PSA-32A6S?
The extension block supports a maximum current of 32 A and a total power of 7360 W at 230 V.
Can I use the PSA-32A6S outdoors?
The device has an IP20 rating, meaning it is not protected against water. Use only in dry indoor areas.
How many outlets does the PSA-32A6S have?
It has 6 outlets, each rated for 32 A.
Is the PSA-32A6S compatible with CEE 7/7 plugs?
Yes, the Schuko outlets accept both Schuko (CEE 7/4) and French (CEE 7/7) plugs.
Does the extension block have a reset button?
It features an integrated circuit breaker that automatically resets after overload is removed.
What cable length is provided?
The unit comes with a 1.5 m cable for connection to mains.
Can I daisy-chain multiple PSA-32A6S units?
It is not recommended to daisy-chain power distribution blocks to avoid exceeding current ratings.
How should I clean the device?
Wipe the housing with a dry, soft cloth. Do not use any liquids or abrasive cleaners.
What should I do if the unit trips frequently?
Reduce the connected load below 32 A and check for short circuits. If the issue persists, consult a qualified electrician.
Is a grounding wire necessary?
Yes, the PSA-32A6S must be connected to a properly grounded power source for safety.

User questions about PSA-32A6S Showtec

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Extension block in PDF format for free! Find your manual PSA-32A6S - Showtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PSA-32A6S by Showtec.

USER MANUAL PSA-32A6S Showtec

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Showtec

Model : PSA-32A6S

Category : Extension block