Showtec

Chargercase for 6 x EventLITE 4/10 Q4 - Lighting Showtec - Free user manual and instructions

Find the device manual for free Chargercase for 6 x EventLITE 4/10 Q4 Showtec in PDF.

📄 12 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Showtec Chargercase for 6 x EventLITE 4/10 Q4 - page 3
3 / 12
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Charging Case / Flight Case
Brand Showtec
Model Chargercase for 6 x EventLITE 4/10 Q4
Compatible Fixtures Showtec EventLITE 4/10 Q4 (up to 6 units)
Material Plywood with aluminum edging and PVC covering
Dimensions (approximate) 600 x 400 x 300 mm
Weight (approximate) 12 kg
Power Input IEC power inlet, 100-240 V AC, 50/60 Hz
Power Output 6 x IEC or PowerCON outlets (hardwired)
DMX Wiring Pre-wired DMX passthrough with 5-pin XLR connectors
Cable Management Integrated cable tray and cable exits
Latches Recessed butterfly latches
Handles 2 side handles and 1 pull handle
Wheels 4 casters (2 locking)
Protection Class IP20 (indoor use only)
Maintenance Wipe with a dry cloth; keep ventilation slots clear
Spare Parts Availability Contact Showtec or authorized dealers
Repairability Modular design; replacement parts available
Safety Built-in overload protection; use with proper grounding
Intended Use Tour and rental applications

Frequently Asked Questions - Chargercase for 6 x EventLITE 4/10 Q4 Showtec

How many fixtures can the Chargercase hold?
The Chargercase is designed to hold up to 6 Showtec EventLITE 4/10 Q4 fixtures.
Is the case battery-powered or does it require external power?
The case itself does not contain batteries. It requires an external 100-240 V AC power source to supply power to the fixtures via the built-in power distribution.
Does the case come pre-wired for DMX?
Yes, the Chargercase includes pre-wired 5-pin XLR DMX pass-through connections so you can daisy-chain fixtures easily.
What are the dimensions and weight of the case?
The approximate dimensions are 600 x 400 x 300 mm and it weighs about 12 kg (empty). Actual measurements may vary.
Can I use this case with other brands of light fixtures?
The case is specifically designed for the EventLITE 4/10 Q4. While other small LED pars may fit mechanically, the power and DMX connectors may not align.
How do I clean and maintain the case?
Clean the exterior with a soft, dry cloth. Avoid using liquids or abrasive cleaners. Ensure ventilation slots are not blocked.
Are spare parts available for the Chargercase?
Yes, spare parts such as latches, handles, casters, and electrical components can be ordered through Showtec or authorized dealers.
What type of power connectors does the case have?
The case has an IEC power inlet for input and provides IEC or PowerCON outlets (exact type may vary) for each of the 6 fixtures.
Is the case stackable?
The design includes stacking corners and recessed hardware, allowing multiple cases to be stacked securely for transport.
What safety features does the Chargercase include?
The case features overload protection, grounding, and locking casters. Always use with a properly grounded power source and avoid overloading circuits.

User questions about Chargercase for 6 x EventLITE 4/10 Q4 Showtec

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Lighting in PDF format for free! Find your manual Chargercase for 6 x EventLITE 4/10 Q4 - Showtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Chargercase for 6 x EventLITE 4/10 Q4 by Showtec.

USER MANUAL Chargercase for 6 x EventLITE 4/10 Q4 Showtec

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Showtec

Model : Chargercase for 6 x EventLITE 4/10 Q4

Category : Lighting