HT-S6500 - Uncategorized ONKYO - Free user manual and instructions
Find the device manual for free HT-S6500 ONKYO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 5.1 Home Theater |
| Brand | Onkyo |
| Model | HT-S6500 |
| Number of Channels | 5.1 |
| Output Power (Total) | 600 W RMS |
| Speaker Impedance | 6 ohms |
| Frequency Response | 20 Hz - 20 kHz |
| Subwoofer Dimensions (W x H x D) | 230 x 320 x 400 mm |
| Subwoofer Weight | 8.5 kg |
| Amplifier Dimensions (W x H x D) | 435 x 150 x 320 mm |
| Amplifier Weight | 7.2 kg |
| Power Consumption (Operating) | 450 W |
| Standby Power Consumption | < 0.5 W |
| HDMI Inputs | 4 inputs, 1 output (ARC) |
| Optical Inputs | 2 |
| Coaxial Input | 1 |
| Headphone Output | Yes (6.35 mm jack) |
| Supported Audio Formats | Dolby TrueHD, DTS-HD Master Audio, PCM |
| Wireless Connectivity | Bluetooth 4.1 |
| Included Accessories | Remote control, batteries, HDMI cable, speaker feet |
| Maintenance and Cleaning | Dust with a soft, dry cloth. Do not use any abrasive or solvent cleaners. |
| Safety Instructions | Do not expose to moisture, do not block ventilation slots, disconnect during storms. |
| Warranty | 2 years |
| Repairability | Spare parts available through Onkyo authorized service (minimum 5 years after end of production). |
Frequently Asked Questions - HT-S6500 ONKYO
How to connect the HT-S6500 system to my TV ?
Use an HDMI cable (included) between the TV's HDMI ARC output and the amplifier's HDMI ARC input. Make sure both devices are turned on and select the correct source on the amplifier.
Can I use the system wirelessly (Bluetooth) ?
Yes, the Onkyo HT-S6500 is equipped with Bluetooth. Enable Bluetooth on your source device (smartphone, tablet) and select 'Onkyo HT-S6500' from the list of available devices.
How to install the speakers for optimal surround sound ?
Place the front speakers on each side of the TV, the center speaker above or below the screen, and the rear speakers behind the listening position. The subwoofer can be placed in a corner of the room.
What to do if there is no sound ?
Check that the amplifier is on and the correct source is selected. Make sure the speaker cables are properly connected. Try increasing the volume. If the problem persists, perform a factory reset.
How to adjust the speaker levels ?
Use the amplifier's setup menu (button 'Setup' on the remote). Navigate to 'Speaker Levels' and adjust each channel using the +/- keys, using a test tone.
Can I connect a headphone ?
Yes, plug a headphone (6.35 mm jack) into the 'PHONES' jack on the front panel of the amplifier. The speakers will be automatically muted.
How to clean the system ?
Use a soft, dry cloth to dust surfaces. Never use chemicals or damp cloths. For speaker grilles, gently vacuum with a brush attachment.
What to do if the remote does not work ?
Replace the batteries (2x AAA). Check that there is no obstacle between the remote and the sensor. If the problem persists, reset the remote by removing the batteries and pressing all keys for 5 seconds.
How to update the firmware ?
Go to the Onkyo website, download the latest firmware version for the HT-S6500. Transfer the file to a USB drive formatted in FAT32, insert it into the front USB port of the amplifier, then follow the on-screen instructions.
Where to find spare parts ?
Contact the Onkyo authorized service center. Spare parts (e.g., power supply, connectors) are available subject to warranty period and repairability policy.
User questions about HT-S6500 ONKYO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual HT-S6500 - ONKYO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HT-S6500 by ONKYO.