AURA-8802 - Printer Posiflex - Free user manual and instructions
Find the device manual for free AURA-8802 Posiflex in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Thermal Receipt Printer |
| Brand | Posiflex |
| Model | AURA-8802 |
| Print Technology | Direct Thermal |
| Print Speed | Up to 250 mm/s |
| Print Resolution | 203 dpi |
| Paper Width | 80 mm |
| Paper Roll Diameter | Up to 80 mm |
| Interface | USB, Serial, Ethernet |
| Power Supply | 24 V DC |
| Power Consumption | Approx. 50 W (operating), < 1 W (standby) |
| Dimensions (W x D x H) | Approx. 185 x 145 x 130 mm |
| Weight | Approx. 1.5 kg |
| Supported Character Sets | Multiple international character sets |
| Barcode Printing | 1D and 2D barcodes supported |
| Auto Cutter | Yes, partial/full cut |
| Cash Drawer Drive | Yes, RJ11 connector |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -10°C to 60°C |
| Humidity | 10% to 80% (non-condensing) |
| Maintenance | Clean print head with alcohol swab; replace paper roll as needed |
| Safety Certifications | CE, FCC, RoHS |
| Included Accessories | Power adapter, USB cable, quick start guide |
Frequently Asked Questions - AURA-8802 Posiflex
How do I load paper into the AURA-8802?
Open the paper cover by pressing the release button. Insert the paper roll with the thermal side facing up. Pull out a small amount of paper and close the cover. The printer will automatically feed the paper.
What should I do if the printer stops printing?
Check the paper roll: ensure it is not empty or jammed. Also verify that the printer is properly connected via USB, serial, or Ethernet. Try restarting the printer and the host device.
How do I clean the print head?
Turn off the printer and unplug it. Open the paper cover and remove the paper roll. Use a cotton swab moistened with isopropyl alcohol to gently wipe the print head. Let it dry completely before reloading paper.
Which type of paper should I use?
Use 80mm wide thermal paper rolls with a maximum outer diameter of 80mm. Ensure the paper is compatible with thermal printers to avoid damage.
Can I connect the printer via Bluetooth?
The AURA-8802 standard interfaces are USB, Serial, and Ethernet. For Bluetooth connectivity, you may need an external Bluetooth adapter or a specific model variant if available.
How do I reset the printer to factory settings?
Turn off the printer. Press and hold the feed button while turning on the power. Continue holding until the printer prints a test page. Release the button; settings are reset.
What does the LED indicator mean when it flashes red?
A flashing red LED typically indicates a paper jam, paper low, or an error. Check the paper path for obstructions and ensure the paper roll is properly inserted.
Can I print graphics and barcodes?
Yes, the AURA-8802 supports 1D barcodes (e.g., UPC, Code 128) and 2D barcodes (e.g., QR code). Graphics can be printed using appropriate commands.
Is the printer compatible with ESC/POS commands?
Yes, the printer supports standard ESC/POS command set, making it compatible with most POS systems.
How do I change the serial port settings?
Use the printer's utility software or send the appropriate ESC/POS commands to set baud rate, parity, and stop bits. Default settings are usually 9600 baud, 8 data bits, no parity, 1 stop bit.
User questions about AURA-8802 Posiflex
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual AURA-8802 - Posiflex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AURA-8802 by Posiflex.
USER MANUAL AURA-8802 Posiflex
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Posiflex
Model : AURA-8802
Category : Printer