ASH18DD - Air conditioner GE - Free user manual and instructions
Find the device manual for free ASH18DD GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Through-the-wall air conditioner |
| Cooling Capacity (BTU/h) | 18,000 |
| Energy Efficiency Ratio (EER) | 11.2 |
| Voltage (V) | 230 |
| Frequency (Hz) | 60 |
| Phase (Ph) | 1 |
| Dimensions (H x W x D, inches) | 26.5 x 23.6 x 23.0 |
| Weight (lbs) | 95 |
| Refrigerant Type | R-410A |
| Fan Speeds | 3 (High, Medium, Low) |
| Thermostat Control | Electronic with remote |
| Filter Type | Washable mesh filter |
| Temperature Range (°F) | 60 - 86 |
| Modes | Cool, Fan, Energy Saver |
| Timer | 24-hour programmable |
| Sleep Mode | Yes |
| Auto Restart | Yes |
| Remote Control | Included |
| Installation Type | Through-the-wall sleeve |
| Warranty (years) | 1 |
| Recommended Room Size (sq ft) | Up to 1,000 |
Frequently Asked Questions - ASH18DD GE
How often should I clean the filter?
We recommend cleaning the washable filter every two weeks during heavy use. A dirty filter reduces cooling efficiency and may cause the unit to ice up.
My air conditioner is not cooling properly. What should I check?
First, ensure the thermostat is set lower than room temperature. Check that the filter is clean and that air vents are not blocked. Also verify that the unit is not in Fan Only mode.
What does the 'Check Filter' indicator mean?
The Check Filter light comes on after 250 hours of operation to remind you to clean the filter. Clean the filter and press the Filter Reset button on the control panel to turn off the light.
Can I use an extension cord with this air conditioner?
No, do not use an extension cord. The ASH18DD requires a dedicated circuit. Using an extension cord can cause voltage drop and create a fire hazard.
How do I set the timer?
Press the Timer button on the remote. Use +/- to set the desired time (0.5-24 hours). The unit will turn on or off after the set time depending on whether it's currently off or on.
The remote control is not working. What can I try?
Replace the AAA batteries (2x). Make sure there are no obstacles between the remote and the unit. Point the remote directly at the receiver window on the front panel.
How do I clean the front grille?
Turn off and unplug the unit. Use a soft, damp cloth with mild detergent to wipe the grille. Do not use harsh chemicals or abrasive cleaners. Dry thoroughly before operating.
What does error code 'E2' mean?
Error code E2 indicates a room temperature sensor failure. Try unplugging the unit for 30 seconds. If the error persists, contact a qualified technician.
Can I install this in a double-hung window?
The GE ASH18DD is designed for through-the-wall installation only. For window installation, refer to models specifically for window use.
How do I drain the unit?
This model has a self-evaporating system that recycles condensate. In high humidity, you may need to attach a drain hose to the internal condensate drain (refer to manual for location).
User questions about ASH18DD GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual ASH18DD - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ASH18DD by GE.
USER MANUAL ASH18DD GE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GE
Model : ASH18DD
Category : Air conditioner