X-DR S MX - Uncategorized HILTI - Free user manual and instructions
Find the device manual for free X-DR S MX HILTI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Impact Driver |
| Model | X-DR S MX |
| Brand | Hilti |
| Dimensions (L x W x H) | Approx. 140 x 78 x 240 mm |
| Weight (without battery) | Approx. 1.2 kg |
| Power Source | Li-ion battery (18V series) |
| Motor Type | Brushless motor |
| Chuck Type | Quick-release hex chuck (1/4") |
| Max Torque | Up to 180 Nm |
| Speed Settings | Variable speed trigger, 2-speed gearbox |
| Max Impact Rate | 3,600 ipm |
| LED Light | Yes, with delay off |
| Battery Compatibility | Hilti B 18V series (e.g., B 18/5.2) |
| Charging Time | Approx. 45 min (5.2 Ah) |
| Overload Protection | Electronic motor and battery protection |
| Ergonomic Handle | Rubberized, anti-slip grip |
| Vibration Control | Integrated vibration damping |
| Warranty | 2 years (extendable) |
| Included Accessories | Bit holder, magnetic screw holder, belt clip |
Frequently Asked Questions - X-DR S MX HILTI
What battery types are compatible with the Hilti X-DR S MX?
The Hilti X-DR S MX is compatible with all Hilti B 18V series batteries, including B 18/4.0, B 18/5.2, and B 18/8.0.
How do I change the direction of rotation?
Use the forward/reverse switch located above the trigger. Slide it to the left for forward (screwing), right for reverse (unscrewing).
What is the maximum torque of the X-DR S MX?
The maximum torque is up to 180 Nm, suitable for heavy-duty fastening applications.
Can I use the impact driver for drilling?
No, the X-DR S MX is an impact driver designed for driving screws and bolts. For drilling, use a drill/driver with a chuck.
How do I clean and maintain the tool?
Clean the tool with a dry cloth. Keep ventilation slots free of dust. Do not use water or solvents. Periodically check the chuck for wear.
What is the recommended tightening torque for drywall screws?
Start with a low torque setting and adjust as needed. Typically, a torque of 10-15 Nm is sufficient for drywall screws.
How do I activate the LED light?
The LED light activates automatically when the trigger is pressed. It will stay on for a few seconds after releasing the trigger.
What is the weight of the tool without battery?
The tool weighs approximately 1.2 kg without battery and bit.
Can I use impact-rated screwdriver bits?
Yes, always use impact-rated bits (marked with an impact symbol) to prevent bit breakage under high torque.
How do I check if the tool is still under warranty?
Check the serial number on the tool and contact Hilti customer service or register online to verify warranty status.
User questions about X-DR S MX HILTI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual X-DR S MX - HILTI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X-DR S MX by HILTI.
USER MANUAL X-DR S MX HILTI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HILTI
Model : X-DR S MX
Category : Uncategorized