ReadyNAS RN21241E - NAS NETGEAR - Free user manual and instructions
Find the device manual for free ReadyNAS RN21241E NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | NAS (Network Attached Storage) |
| Marque | Netgear |
| Modèle | ReadyNAS RN21241E |
| Nombre de baies | 2 |
| Processeur | Intel Atom 2.13 GHz dual-core |
| Mémoire RAM | 2 Go DDR3 |
| Capacité maximale de stockage | 8 To (2 x 4 To) |
| RAID supporté | RAID 0, RAID 1, JBOD |
| Ports réseau | 1 x Gigabit Ethernet (RJ-45) |
| Ports USB | 2 x USB 3.0, 1 x USB 2.0 |
| Dimensions | 310 x 250 x 107 mm (12.2 x 9.8 x 4.2 po) |
| Poids | 3.8 kg (8.4 lb) |
| Alimentation | Adaptateur secteur 65 W, entrée 100-240 V CA |
| Consommation électrique | 35 W (veille), 65 W (pleine charge) |
| Niveau sonore | 24 dBA |
| Système d'exploitation | NETGEAR RAIDiator (basé sur Linux) |
| Fonctions principales | Partage de fichiers, sauvegarde, streaming multimédia, serveur FTP, serveur d'impression, cloud privé |
| Sécurité | Chiffrement AES 256 bits, liste de contrôle d'accès (ACL), pare-feu intégré |
| Entretien et nettoyage | Nettoyer avec un chiffon doux sec. Éviter les liquides. Mettre à jour régulièrement le firmware. |
| Pièces détachées et réparabilité | Disques durs remplaçables à chaud. Alimentation externe. Voir manuel pour réparation. |
| Informations générales | Garantie 2 ans. Fabriqué en Chine. Certifié CE, FCC, RoHS. |
Frequently Asked Questions - ReadyNAS RN21241E NETGEAR
How to set up my Netgear ReadyNAS RN21241E?
Connect the NAS to your network via Ethernet and power it on. Install the included RAIDiator software on your computer, then follow the on-screen wizard to configure disks and network settings.
What RAID levels are supported and which should I choose?
The RN21241E supports RAID 0 (striping for performance), RAID 1 (mirroring for redundancy), and JBOD. For data safety, choose RAID 1 if you have two drives.
How do I update the firmware?
Go to the web admin interface (default IP or via RAIDiator). Navigate to System > Update and check for updates. Download and install the latest firmware from Netgear's support site.
Can I access my files over the internet?
Yes, enable ReadyCLOUD in the admin panel. Create a Netgear account and link your NAS for remote access via a web browser or mobile app.
How to replace a failed hard drive?
The RN21241E supports hot-swap. Simply remove the failed drive from its bay and insert a new one. The system will automatically rebuild the RAID array (if RAID 1 is used).
How do I set up automatic backups?
Use the Backup app in the admin interface. Configure a scheduled backup to an external USB drive, another NAS, or cloud service like Amazon S3.
What media streaming services are available?
The NAS supports DLNA/UPnP for streaming to smart TVs, game consoles, and media players. It also works with Plex Media Server (installable via add-ons).
How to reset the admin password?
Use the reset button on the back (press and hold for 5 seconds) to restore factory defaults. Alternatively, access recovery mode via USB or network boot.
Is this NAS compatible with Time Machine on Mac?
Yes, the RN21241E supports Apple Time Machine. Enable the AFP protocol in the admin panel and configure Time Machine to use a shared folder on the NAS.
What is the power consumption and can I set a power schedule?
Power consumption is about 35W idle and 65W under load. You can set a Power Schedule in the admin interface to turn off the NAS during certain hours to save energy.
User questions about ReadyNAS RN21241E NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your NAS in PDF format for free! Find your manual ReadyNAS RN21241E - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ReadyNAS RN21241E by NETGEAR.