ReadyData EDA4000 - NAS NETGEAR - Free user manual and instructions
Find the device manual for free ReadyData EDA4000 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | NAS (Network Attached Storage) |
| Model | Netgear ReadyData EDA4000 |
| Drive Bays | 4 x 3.5" SATA HDD/SSD (hot-swappable) |
| Processor | Quad-core 2.0 GHz |
| Memory | 2 GB DDR3 (expandable) |
| RAID Levels | RAID 0, 1, 5, 6, 10, JBOD |
| Network Interface | 2 x Gigabit Ethernet |
| USB Ports | 2 x USB 3.0, 2 x USB 2.0 |
| Dimensions (HxWxD) | 200 x 150 x 250 mm |
| Weight | 3.2 kg (without drives) |
| Power Supply | External, 90W (100-240V AC) |
| Cooling | 1 x 120mm fan |
| File System | EXT4, BTRFS, NTFS (read-only) |
| Protocols | CIFS/SMB, NFS, AFP, FTP, WebDAV |
| Data Protection | Snapshot, backup to cloud, USB copy |
| Management | Web-based UI, mobile app (ReadyCloud) |
| Cleaning | Use a soft dry cloth; do not use liquids |
| Safety | Keep away from moisture and heat; use surge protector |
| Spare Parts | Contact Netgear support or authorized resellers |
| Repair | Refer to user manual or certified technician |
Frequently Asked Questions - ReadyData EDA4000 NETGEAR
How do I access the ReadyData EDA4000 for the first time?
Use the web browser and enter www.readycloud.com or the device's IP address. Follow the setup wizard to configure network, disks, and users.
What RAID levels are supported?
The NAS supports RAID 0, 1, 5, 6, 10, and JBOD. RAID 5 is recommended for a balance of capacity and redundancy.
Can I replace a failed hard drive without turning off the NAS?
Yes, the drive bays are hot-swappable. Simply remove the failed drive and insert a new one. The RAID will rebuild automatically.
How do I set up user accounts and permissions?
Log into the admin web interface, go to Users section. Add users and assign them to groups. Set folder permissions for read/write access.
What is the default administrator username and password?
The default is admin for username and password for password. Change it immediately after first login.
How can I backup my computer to the NAS?
Use the ReadyNAS Replicate software or set up a scheduled backup via the admin panel. Windows users can also use File History.
Can I access my files remotely?
Yes, enable ReadyCloud in settings. Then access your files via the ReadyCloud mobile app or web portal from anywhere.
What is the maximum hard drive capacity supported?
The EDA4000 supports drives up to 20TB each, for a total raw capacity of up to 80TB.
How do I update the firmware?
Go to System > Update in the admin UI. The NAS will check for updates online. Follow prompts to install the latest firmware.
Why is my NAS not showing up on the network?
Ensure it is connected to the router with a working Ethernet cable. Check that DHCP is enabled or set a static IP. Also verify firewall settings.
User questions about ReadyData EDA4000 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your NAS in PDF format for free! Find your manual ReadyData EDA4000 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ReadyData EDA4000 by NETGEAR.
USER MANUAL ReadyData EDA4000 NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : ReadyData EDA4000
Category : NAS