CG 24EASP (SL) - String Trimmers HITACHI - Free user manual and instructions
Find the device manual for free CG 24EASP (SL) HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | String Trimmer |
| Brand | Hitachi |
| Model | CG 24EASP (SL) |
| Engine Displacement | 24 cc |
| Engine Type | 2-Stroke, Air-Cooled |
| Power Source | Gasoline (Petrol) |
| Fuel Mix | 50:1 (Gasoline:2-Cycle Oil) |
| Cutting Width | 17 inches (430 mm) |
| Cutting Line Diameter | 0.095 inches (2.4 mm) |
| Shaft Type | Straight |
| Weight (with fuel) | Approx. 11.7 lbs (5.3 kg) |
| Overall Length | Approx. 68 inches (173 cm) |
| Starter Type | Manual Recoil Starter |
| Fuel Tank Capacity | 12.7 fl oz (375 ml) |
| Spark Plug Gap | 0.024 inches (0.6 mm) |
| Safety Features | Throttle lock, stop switch, debris guard |
| Maintenance | Clean air filter, check spark plug, lubricate gearcase |
| Spare Parts | Cutting line, air filter, spark plug, fuel filter |
| Repairability | User-serviceable with manual; professional service recommended |
Frequently Asked Questions - CG 24EASP (SL) HITACHI
How do I start the Hitachi CG 24EASP (SL) string trimmer?
Ensure the fuel tank is filled with proper 50:1 mix. Set the choke lever to the closed position (if cold), press the primer bulb 5-6 times, then pull the starter cord firmly until the engine fires. Then open the choke and pull again to start.
What is the correct fuel mixture for this trimmer?
Use a 50:1 ratio of unleaded gasoline (minimum 89 octane) to high-quality 2-cycle oil. Do not use ethanol blends above 10%. Mix thoroughly before filling.
How do I replace the cutting line?
Turn off the engine and remove the spark plug cap. Remove the spool cap, take out the old line, and insert new 0.095-inch (2.4 mm) diameter line. Wind evenly and replace the cap.
What safety precautions should I take when using the trimmer?
Always wear safety glasses, hearing protection, long pants, sturdy boots, and gloves. Keep bystanders at least 50 feet away. Never operate with damaged guards.
Why does the engine stall frequently?
Common causes include stale fuel, a dirty air filter, or a clogged fuel filter. Check the spark plug gap and clean or replace filters. Ensure the carburetor is properly adjusted.
How do I adjust the carburetor on the CG 24EASP?
Carburetor adjustment should be done by a qualified technician. Improper adjustment can damage the engine. Refer to the manual for specific idle and mixture screw settings.
Can I use a blade instead of a string?
The CG 24EASP is designed for string use only. Do not attach blades as it may cause injury and damage the trimmer. Use only approved cutting heads.
How often should I clean the air filter?
Clean the air filter after every 10 hours of operation or more often in dusty conditions. Wash with warm soapy water, dry thoroughly, and re-oil lightly before reinstalling.
What is the recommended spark plug type?
Use an NGK BPMR7A or equivalent. Gap to 0.024 inches (0.6 mm). Replace every 100 hours or once a season.
Where can I find replacement parts?
Replacement parts are available at authorized Hitachi dealerships, online retailers, or through the Hitachi parts catalog. Use genuine parts for best performance.
User questions about CG 24EASP (SL) HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your String Trimmers in PDF format for free! Find your manual CG 24EASP (SL) - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CG 24EASP (SL) by HITACHI.
USER MANUAL CG 24EASP (SL) HITACHI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HITACHI
Model : CG 24EASP (SL)
Category : String Trimmers