KU120PRO1XA - Range hood BERTAZZONI - Free user manual and instructions
Find the device manual for free KU120PRO1XA BERTAZZONI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Range hood |
| Brand | Bertazzoni |
| Model | KU120PRO1XA |
| Width | 120 cm |
| Depth | 60 cm |
| Height (min-max) | 65 - 110 cm |
| Net weight | 35 kg |
| Power supply | 230 V / 50 Hz |
| Motor power | 300 W |
| Max airflow rate | 800 m³/h |
| Max noise level | 60 dB(A) |
| Exhaust mode | Extraction or recirculation |
| Control type | Electronic touch controls |
| Lighting | Integrated LED |
| Grease filters | Washable metal filters (3) |
| Charcoal filter | Optional (recirculation) |
| Speeds | 4 speeds + boost |
| Timer function | Yes |
| Automatic shut-off | Yes (after 10 min) |
| Repairability index | 7.1 / 10 |
| Available spare parts | Filters, bulbs, remote control (optional) |
| Filter maintenance | Clean every 1-2 months in dishwasher |
| Exterior cleaning | Soft cloth and mild detergent |
| Warranty | 2 years (parts and labor) |
Frequently Asked Questions - KU120PRO1XA BERTAZZONI
How to install the Bertazzoni KU120PRO1XA range hood?
Installation must be carried out by a qualified professional. Maintain a minimum distance of 65 cm between the hood and the cooking surface. Firmly attach the wall bracket and connect the exhaust duct (if extraction mode) or install a charcoal filter (if recirculation mode).
What are the operating modes of the hood?
The hood can operate in extraction mode (air is exhausted outdoors via a duct) or in recirculation mode (air is filtered and returned to the kitchen). For recirculation mode, a charcoal filter is required.
How to clean the grease filters?
The metal grease filters can be cleaned in the dishwasher or by hand with warm soapy water. It is recommended to clean them every 1 to 2 months, or more often with heavy use.
Does the charcoal filter need to be replaced?
Yes, the charcoal filter (if used in recirculation mode) must be replaced every 3 to 6 months depending on usage. A saturation indicator may appear on the control panel.
How to adjust the hood speed?
Press the keys on the control panel to select one of the 4 available speeds. The intensive speed (boost) is activated by pressing the dedicated key and automatically deactivates after 5 minutes.
What to do if the hood does not turn on?
First check the power supply (outlet and circuit breaker). If the problem persists, the internal fuse may be defective. Contact Bertazzoni after-sales service for a diagnosis.
How to replace the LED bulb?
The LED lighting is integrated and must be replaced by a qualified professional. Do not attempt to disassemble the module yourself; contact customer service.
Is the hood noisy?
The noise level varies according to speed: up to 60 dB(A) at maximum speed. At reduced speed, the noise is below 40 dB(A), which remains discreet.
Can I use the hood without an exhaust duct?
Yes, in recirculation mode, the hood filters the air and returns it to the room. You must install a charcoal filter (not supplied) and close the exhaust outlet.
Where to find spare parts for my hood?
Spare parts (filters, bulbs, remote control) are available from Bertazzoni after-sales service or authorized dealers. Use the model number KU120PRO1XA to order.
User questions about KU120PRO1XA BERTAZZONI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual KU120PRO1XA - BERTAZZONI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KU120PRO1XA by BERTAZZONI.
USER MANUAL KU120PRO1XA BERTAZZONI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BERTAZZONI
Model : KU120PRO1XA
Category : Range hood