DT9SY2B - Range hood GORENJE - Free user manual and instructions
Find the device manual for free DT9SY2B GORENJE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Gorenje |
| Model | DT9SY2B |
| Product Type | Range Hood |
| Installation Type | Built-in / Under Cabinet |
| Width | 90 cm |
| Depth | 50 cm |
| Height (Min-Max) | 60 - 130 cm (telescopic) |
| Weight | 22 kg |
| Power Supply | 220-240 V, 50 Hz |
| Motor Power | 250 W |
| Lighting Power | 2 x 2.5 W LED |
| Number of Speeds | 3 + Boost |
| Max Extraction Rate | 800 m³/h |
| Noise Level (max) | 65 dB(A) |
| Filter Type | Aluminum grease filter (washable) |
| Control Type | Electronic touch control |
| Ducting / Recirculation | Ducted (optional recirculation kit) |
| Energy Class | A |
| Annual Energy Consumption | 45 kWh/year |
| Grease Filter Efficiency | Class B |
| Fluid Dynamic Efficiency | Class A |
| Warranty | 2 years |
Frequently Asked Questions - DT9SY2B GORENJE
How to clean the grease filters?
Remove the aluminum filters and wash them by hand with warm soapy water or in the dishwasher at low temperature. Let them dry completely before reinstalling.
Can the hood be used in recirculation mode?
Yes, but a recirculation kit with a charcoal filter is required. The kit is sold separately. Follow the installation manual for proper setup.
What is the recommended installation height above the hob?
For electric hobs, 65-75 cm; for gas hobs, 75-85 cm. Refer to the user manual for exact specifications based on your hob type.
Why is the hood noisy?
Noise can be due to loose ductwork, blocked filters, or incorrect installation. Ensure filters are clean and ducts are properly sealed. If using recirculation mode, check the charcoal filter.
How to replace the LED lights?
LED lights are integrated and should be replaced by a qualified technician. Contact Gorenje service for assistance. Do not attempt to replace them yourself.
What does the boost function do?
The boost function runs the fan at maximum speed for a limited time (usually 10 minutes) to quickly remove strong odors or steam, then returns to the previous speed.
How often should the charcoal filter be replaced?
Charcoal filters (if used) should be replaced every 3-6 months, depending on usage. Check the filter indicator light or manual for guidance.
Can I connect the hood to an existing duct?
Yes, but ensure the duct diameter matches (usually 150 mm or 120 mm) and the duct is as short and straight as possible for efficient extraction.
What is the power consumption in standby?
The standby power consumption is less than 1 W, complying with EU regulations for energy efficiency.
How do I reset the filter saturation indicator?
After cleaning or replacing filters, press and hold the boost button for about 3 seconds until the indicator turns off. Refer to the manual for exact procedure.
User questions about DT9SY2B GORENJE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual DT9SY2B - GORENJE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DT9SY2B by GORENJE.
USER MANUAL DT9SY2B GORENJE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GORENJE
Model : DT9SY2B
Category : Range hood