WQP8-J7714D - Dishwasher Hanseatic - Free user manual and instructions
Find the device manual for free WQP8-J7714D Hanseatic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | Hanseatic |
| Model | WQP8-J7714D |
| Dimensions (HxWxD) | 81.5 x 59.8 x 55 cm |
| Weight | Approx. 45 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Energy Efficiency Class | E (EU 2019/2017) |
| Water Consumption per Cycle | 9.5 L |
| Energy Consumption per Cycle | 0.95 kWh |
| Place Settings | 14 |
| Noise Level | 46 dB(A) |
| Number of Programs | 6 (Eco, Auto, Intensive, Quick, Glass, Pre-Rinse) |
| Delay Start | Yes, up to 24 hours |
| Self-Cleaning Filter | Yes, triple filter system |
| Water Softener | Integrated, adjustable |
| Rinse Aid Dispenser | Yes, adjustable |
| Salt Container | Yes |
| Child Lock | Yes |
| Detergent Dispenser | Yes, with flap |
| Cutlery Basket | Yes, removable |
| Upper Basket Height Adjustment | Yes, 2 positions |
| Acoustic Signal | Yes, adjustable |
| Display Type | LED indicators |
| Safety Features | Aquastop, anti-flood hose, overflow protection |
| Material (Interior) | Stainless steel |
| Manufacturer’s Warranty | 2 years |
Frequently Asked Questions - WQP8-J7714D Hanseatic
How do I install the dishwasher correctly?
Ensure the dishwasher is level and connected to a cold water supply (max 60°C) and a 220-240V socket with earth. Secure the inlet hose with a leak-proof connection and route the drain hose into a siphon or standpipe. Refer to the installation chapter in the manual for exact steps.
Why does my dishwasher not start?
Check that the door is fully closed and latched, the power cord is plugged in, and the circuit breaker is on. Also ensure the water supply is open and the program selector knob is in a valid position. If the issue persists, consult the troubleshooting section.
How do I add salt and rinse aid?
Open the salt container cap (usually at the bottom of the tub) and fill with dishwasher salt using the funnel. For rinse aid, open the dispenser cap located on the door and pour until the indicator is full. Adjust the dosage via the setting ring as per water hardness.
What does the water hardness setting do?
The dishwasher has an integrated water softener. You must set the hardness level according to your local water supply. This prevents scale buildup. Use a test strip to measure hardness (in °dH) and adjust via the control panel (consult manual for steps).
How do I clean the filters?
Turn off the dishwasher, remove the lower rack, and unscrew the cylindrical filter assembly. Rinse the filters under running water, scrub off any debris, and reassemble. Clean the fine filter weekly and the coarse filter monthly for optimal performance.
What is the best program for everyday use?
The Eco program (50°C) is energy-efficient and suitable for normally soiled dishes. For heavily soiled pots and pans, use the Intensive program (70°C). The Quick program (45°C) is for lightly soiled items.
Can I open the dishwasher during a cycle?
We discourage it because hot steam and water may escape. If you must open, wait until the water sound has stopped. The cycle will pause automatically, but restarting may cause incomplete washing. Only open when necessary.
How do I resolve error codes on the display?
Common errors: E1 (water supply issue) – check hose and tap; E4 (overflow) – turn off water and clean filter; E8 (heating fault) – contact service. Press the power button to reset; if error repeats, refer to manual or call support.
Why are dishes not drying properly?
Ensure rinse aid is full and the dosage is adequate. Use the Extra Dry option if available. Open the door slightly after the cycle ends to allow moisture to escape. Also check that the dishes are arranged to allow air circulation.
How do I descale the dishwasher?
Use a commercial dishwasher descaler or a mixture of citric acid. Run an empty cycle at 65°C with the descaler in the detergent dispenser. Repeat every 3 months, especially in hard water areas. Do not use vinegar as it may damage rubber seals.
User questions about WQP8-J7714D Hanseatic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual WQP8-J7714D - Hanseatic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WQP8-J7714D by Hanseatic.
USER MANUAL WQP8-J7714D Hanseatic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hanseatic
Model : WQP8-J7714D
Category : Dishwasher