ATE15C - Uncategorized ASPES - Free user manual and instructions
Find the device manual for free ATE15C ASPES in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Model | ATE15C |
| Brand | Aspes |
| Cooling Capacity | 12000 BTU/h |
| Heating Capacity | Not applicable (cooling only) |
| Power Supply | 220-240 V ~ 50 Hz |
| Power Consumption (Cooling) | 1100 W |
| Airflow | 400 m³/h |
| Noise Level | 55 dB(A) |
| Dimensions (W x D x H) | 40 x 35 x 70 cm |
| Weight | 25 kg |
| Refrigerant | R-410A |
| Timer Function | Yes, 1-24 hours |
| Remote Control | Included |
| Thermostat | Adjustable, 16-30 °C |
| Filter Type | Washable mesh filter |
| Maintenance | Clean filter every 2 weeks |
| Safety Features | Overheat protection, auto shut-off |
| Warranty | 2 years |
Frequently Asked Questions - ATE15C ASPES
How do I clean the air filter?
Turn off and unplug the unit. Remove the filter cover, take out the filter, and wash it with warm soapy water. Rinse and let it dry completely before reinstalling. Clean the filter every two weeks for optimal performance.
Why is my air conditioner not cooling?
Check if the filter is clean. Ensure the unit is properly vented to the outside. Make sure the thermostat is set to a lower temperature than the room. If problems persist, the refrigerant might be low; contact a professional.
How do I set the timer?
Press the Timer button on the remote or control panel. Use the + and - buttons to set the desired hours (1-24). The unit will turn on or off after the set time depending on the mode.
What does error code E1 mean?
Error code E1 typically indicates a faulty room temperature sensor. Try unplugging the unit for a few minutes and plugging it back in. If the error persists, contact customer service.
How do I drain the water from the unit?
In cooling mode, water may accumulate. If the internal tank is full, the unit will display a warning. Remove the drain plug at the back and let water drain into a bucket. In dry mode, continuous drainage is recommended.
The remote control is not working. What should I do?
First, replace the batteries. Ensure there are no obstructions between the remote and the unit. Point the remote directly at the receiver. If still not working, try resetting the unit by unplugging it for 10 minutes.
Can I use an extension cord with this air conditioner?
It is not recommended. Use a dedicated outlet. If an extension cord is necessary, use a heavy-duty cord rated for at least 15 amps and keep it as short as possible.
What is the recommended room size for this unit?
This unit is suitable for rooms up to 30 square meters (approximately 320 square feet) with a standard ceiling height.
How do I switch between cooling and fan modes?
Press the Mode button on the remote or control panel to cycle through Cool, Fan, and Dry modes. The selected mode will be displayed on the unit.
Is this air conditioner energy efficient?
Yes, it has an energy efficiency rating (EER) of approximately 10.9, which is standard for portable units. Using the timer and setting the thermostat wisely can save energy.
User questions about ATE15C ASPES
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ATE15C - ASPES and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ATE15C by ASPES.