MBHT2000W - Heating Martec - Free user manual and instructions
Find the device manual for free MBHT2000W Martec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fan Heater |
| Model | MBHT2000W |
| Brand | Martec |
| Power Output | 2000 W |
| Voltage | 220-240 V ~ 50/60 Hz |
| Dimensions (H x W x D) | 25 x 20 x 15 cm |
| Weight | 2.0 kg |
| Heating Settings | 2 power levels (1000 W / 2000 W) |
| Thermostat | Adjustable thermostat with frost protection |
| Fan | High-velocity fan for even heat distribution |
| Oscillation | No |
| Safety Features | Overheat protection, tip-over switch, cool-touch housing |
| Noise Level | Approx. 45 dB |
| Control Type | Rotary dial and push buttons |
| Light Indicator | Power on/off indicator |
| Power Cord Length | 1.5 m |
| Portability | Built-in carry handle |
| Cleaning | Wipe with damp cloth; do not immerse in water |
| Filter | Washable dust filter (rear) |
| Spare Parts | Contact Martec customer service for replacement parts |
| Warranty | 2 years |
Frequently Asked Questions - MBHT2000W Martec
How do I set the thermostat on the Martec MBHT2000W?
Turn the thermostat dial clockwise to increase the desired temperature. The heater will automatically cycle on or off to maintain the set temperature. Refer to the thermostat section in the manual for precise calibration.
What should I do if the heater stops working suddenly?
First, check if the overheat protection has tripped. Unplug the heater, let it cool for at least 15 minutes, and then plug it back in. If the problem persists, inspect the tip-over switch and ensure the heater is on a level surface.
Can I use the heater in a bathroom?
No, the Martec MBHT2000W is not designed for wet locations. It should be kept in dry areas only to avoid electric shock and damage. Use in accordance with safety instructions.
How often should I clean the heater?
Clean the exterior and dust filter every 2 weeks during heavy use. Use a soft cloth for the housing and vacuum the filter gently. Do not use water or abrasive cleaners.
Does the heater have an energy-saving mode?
Yes, the low power setting (1000 W) uses less energy. Additionally, the adjustable thermostat prevents overheating, saving electricity by maintaining the temperature efficiently.
What is the recommended room size for this heater?
The 2000 W output is suitable for rooms up to 20-25 m² in average insulation. For larger rooms, consider using multiple heaters or a more powerful unit.
How do I replace the fuse in the plug?
Unscrew the plug cover, remove the old fuse, and replace it with a new one of the same rating (usually 13A). Ensure the replacement is approved and secure the cover properly.
Why does the heater emit a burning smell when first used?
A slight burning smell is normal during the first few uses as manufacturing residues burn off. Ensure adequate ventilation. If the smell persists or smoke appears, unplug and contact Martec customer service.
Can I use an extension cord?
It is not recommended. If necessary, use a heavy-duty extension cord of at least 1.5 mm² cross-section and fully unrolled. Keep it away from heat sources and water to avoid overheating.
How do I store the heater when not in use?
Unplug, let it cool completely, clean the filter and housing, and store in a cool, dry place. Protect the power cord from kinking. Avoid storing in dusty or humid areas.
User questions about MBHT2000W Martec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual MBHT2000W - Martec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MBHT2000W by Martec.
USER MANUAL MBHT2000W Martec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Martec
Model : MBHT2000W
Category : Heating