Profile Plus 2 MBHP2LS - Heating Martec - Free user manual and instructions
Find the device manual for free Profile Plus 2 MBHP2LS Martec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Panel Heater |
| Model | Profile Plus 2 MBHP2LS |
| Brand | Martec |
| Power Source | 230V ~ 50Hz |
| Heat Output | 2000 W |
| Heating Type | Convection with fan assist |
| Thermostat | Adjustable thermostat with digital display |
| Fan Speeds | 2 speeds (low/high) |
| Timer | 24-hour programmable timer |
| Safety Features | Overheat protection, tip-over switch, child lock |
| Dimensions (HxWxD) | 45 x 30 x 12 cm |
| Weight | 2.5 kg |
| Mounting | Wall-mounted or freestanding with feet |
| Noise Level | < 45 dB |
| Energy Efficiency | Class A |
| Maintenance | Clean with soft dry cloth; do not use abrasive cleaners |
| Spare Parts | Available from authorized service centers |
| Warranty | 2 years |
Frequently Asked Questions - Profile Plus 2 MBHP2LS Martec
How should I clean the Martec Profile Plus 2 heater?
Turn off and unplug the heater. Use a soft dry cloth to wipe the exterior. Do not use water, abrasive cleaners, or solvents. For dust inside, use a vacuum cleaner with a brush attachment on the vents.
Is it safe to leave the heater unattended?
While the heater has overheat protection and a tip-over switch, it is recommended not to leave it unattended for long periods. Always ensure the heater is on a stable, non-flammable surface.
What is the maximum room size for this heater?
The 2000W output is suitable for rooms up to approximately 20-25 m² with standard insulation. For larger rooms, additional heating may be required.
How do I set the 24-hour timer?
Press the Timer button until the display shows the desired time intervals. Use the plus/minus buttons to set the hours and minutes for on/off cycles. Refer to the manual for detailed programming.
Can I use the heater in a bathroom?
This model is not rated for IPX4 or higher water resistance. It should be placed at least 1 meter away from water sources and not used in wet areas unless specified otherwise in the manual.
What is the energy consumption of this heater?
At maximum power, it consumes 2000W. With the thermostat and timer, energy usage can be reduced. Estimated cost per hour at max power depends on local electricity rates.
The thermostat does not seem to work properly. What should I do?
Ensure the temperature setting is higher than the current room temperature. If it still doesn't activate, check for blocked vents or dust on the sensor. Clean gently. If problem persists, contact support.
How do I mount the heater on the wall?
Use the provided wall bracket and screws. Ensure the wall can support the weight (2.5 kg). Follow the manual for drilling holes and securing the bracket. The heater should be mounted at least 30 cm from the floor.
Why is the heater making a clicking noise?
Clicking sounds are often from the thermostat relay or expansion/contraction of materials during heating and cooling. This is normal. If the noise is loud or persistent, check for loose parts or contact service.
Where can I get spare parts for the Profile Plus 2?
Spare parts can be ordered from authorized Martec service centers or through the official website. Provide the model number MBHP2LS and the part name. Always use genuine parts for safety.
User questions about Profile Plus 2 MBHP2LS Martec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual Profile Plus 2 MBHP2LS - Martec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Profile Plus 2 MBHP2LS by Martec.
USER MANUAL Profile Plus 2 MBHP2LS Martec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Martec
Model : Profile Plus 2 MBHP2LS
Category : Heating