TS-VR15 - Subwoofer Audiopipe - Free user manual and instructions
Find the device manual for free TS-VR15 Audiopipe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Audiopipe |
| Model | TS-VR15 |
| Category | Subwoofer |
| Speaker Size | 15 inches |
| Impedance | 4 ohms (dual voice coil) |
| RMS Power Handling | 600 watts |
| Peak Power Handling | 1200 watts |
| Sensitivity | 92 dB |
| Frequency Response | 20 Hz - 200 Hz |
| Mounting Depth | 7.5 inches |
| Cutout Diameter | 14 inches |
| Recommended Enclosure Type | Sealed or ported |
| Recommended Sealed Volume | 1.5 cubic feet |
| Recommended Ported Volume | 2.5 cubic feet |
| Cone Material | Non-pressed paper with foam surround |
| Voice Coil | 4-layer copper |
| Weight | 22 lbs |
| Warranty | 1 year |
Frequently Asked Questions - TS-VR15 Audiopipe
What is the optimal enclosure for the TS-VR15?
The TS-VR15 performs well in both sealed and ported enclosures. For a sealed box, use 1.5 cubic feet; for ported, 2.5 cubic feet tuned to 35 Hz.
What is the recommended amplifier power?
Amp should deliver 600-1200 watts RMS at 4 or 1 ohm, depending on voice coil wiring. Ensure the amp is stable at the final impedance.
Can I wire the dual 4 ohm voice coils to 2 ohms?
Yes, wire them in parallel for a 2 ohm load, or in series for 8 ohms. Parallel wiring is common for more power.
What is the mounting depth required?
The mounting depth is 7.5 inches. Ensure your enclosure has enough clearance for the magnet.
Is the TS-VR15 suitable for a free-air installation?
No, it requires a proper enclosure. Free-air is not recommended as it may cause damage or poor performance.
How do I break in the subwoofer?
Play music at moderate volume for 10-20 hours. Avoid full power until the suspension loosens.
What is the sensitivity rating?
The sensitivity is 92 dB, meaning it is fairly efficient and requires moderate power to produce good output.
Can I use this subwoofer in a home theater?
Yes, but you will need a suitable amplifier and power supply. It is designed for car audio but can be adapted.
How do I clean the subwoofer?
Gently dust the cone with a soft cloth. Avoid liquids or chemicals. Keep the surround free of debris.
What is the voice coil configuration?
It has a dual 4-ohm voice coil with a 4-layer copper winding for high power handling.
User questions about TS-VR15 Audiopipe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual TS-VR15 - Audiopipe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TS-VR15 by Audiopipe.