TS-PC10 - Subwoofer Audiopipe - Free user manual and instructions
Find the device manual for free TS-PC10 Audiopipe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Subwoofer |
| Model | TS-PC10 |
| Size | 10 inches |
| Impedance | 4 ohms |
| RMS Power Handling | 250 Watts |
| Peak Power Handling | 500 Watts |
| Sensitivity | 88 dB |
| Frequency Response | 30 Hz - 250 Hz |
| Voice Coil | Dual 2 ohm |
| Mounting Depth | 5.5 inches |
| Mounting Hole Diameter | 9.1 inches |
| Enclosure Type | Sealed or Ported (recommended) |
| Recommended Sealed Box Volume | 0.7 cubic feet |
| Recommended Ported Box Volume | 1.2 cubic feet |
| Weight | 12 lbs (5.4 kg) |
| Material | Injection-molded polypropylene cone with rubber surround |
| Magnet Type | Ferrite |
| Woofer Termination | Push terminals |
| Maintenance | Wipe with dry cloth; avoid moisture |
| Safety | Do not exceed RMS power; ensure proper enclosure volume |
| Spare Parts | Replacement cone and surround kits available |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - TS-PC10 Audiopipe
What is the recommended enclosure volume for the TS-PC10?
For a sealed enclosure, use 0.7 cubic feet. For a ported enclosure, use 1.2 cubic feet with a 4-inch port (10 inches long). Always double-check with manufacturer specs.
Can I wire this subwoofer to a 1-ohm load?
Yes, if you have a dual 2-ohm voice coil version, wiring coils in parallel gives a 1-ohm load. Ensure your amplifier is stable at 1 ohm.
What is the RMS power handling of the TS-PC10?
The RMS power handling is 250 Watts. Peak power is 500 Watts. Use an amplifier that delivers RMS power within this range.
How do I break in a new subwoofer?
Play music at moderate volume (about 50% of RMS) for 10-20 hours. Vary the frequencies gradually. This loosens the suspension.
What is the mounting depth of the TS-PC10?
The mounting depth is 5.5 inches. Ensure your enclosure has enough internal clearance to avoid the magnet hitting the back wall.
Can I use this subwoofer in a home theater setup?
Yes, but it is designed for car audio. You will need a suitable amplifier and enclosure. A sealed box works well for music accuracy.
How do I clean the subwoofer cone?
Use a soft dry cloth to gently wipe the cone. Do not use water or cleaners, as they may damage the material.
What is the warranty on this subwoofer?
Audiopipe offers a 1-year limited warranty against manufacturing defects. Keep your receipt for proof of purchase.
Why does my subwoofer sound distorted?
Distortion can be caused by clipping from an underpowered amplifier, incorrect enclosure volume, or exceeding the sub's mechanical limits. Check your gain settings and enclosure design.
Can I use aftermarket parts for repair?
Yes, you can find replacement cone kits and surrounds. Ensure they match the TS-PC10 specifications. Refoaming is a common DIY repair.
User questions about TS-PC10 Audiopipe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual TS-PC10 - Audiopipe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TS-PC10 by Audiopipe.
USER MANUAL TS-PC10 Audiopipe
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Audiopipe
Model : TS-PC10
Category : Subwoofer